SureCall Fusion5X Bedienungsanleitung
2
Thank you for purchasing SureCall’s Fusion5X Max cellular signal booster kit. SureCall’s Fusion5X Max was specically designed
to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes
and ofces.
If you have any questions during setup, please reach out to our US-based experienced support technicians:
Call: 1-888-365-6283
Email: [email protected]
Visit: www.surecall.com/support
Watch
installation,
optimization
and
troubleshooting
techniques on
our SureCall
YouTube
channel
@SureCall Stay up to date
with all things
SureCall
TABLE OF CONTENTS
How it works ..........................................................................................................................................................................4
PACKAGE CONTENTS ................................................................................................................................................................ 4
Installation Overview ..............................................................................................................................................................6
INSTALLATION ............................................................................................................................................................................6
Step 1. Find the Area With the Strongest Signal ....................................................................................................................6
Step 2. Install the Outside Yagi Antenna and Outside Amplier ............................................................................................ 7
Step 3. Install the Inside Antennas..........................................................................................................................................9
Step 4: Place the Inside Host Unit and Connect Cables ......................................................................................................11
Step 5: Connect Power Source and Turn On ........................................................................................................................ 12
Step 6: Check and Optimize System, If Needed...................................................................................................................12
Performance Optimization.................................................................................................................................................... 13
TROUBLESHOOTING ................................................................................................................................................................13
LCD INDICATIONS ....................................................................................................................................................................14
SPECIFICATIONS....................................................................................................................................................................... 18
Conguration .......................................................................................................................................................................19
Kitting................................................................................................................................................................................... 19
CONSUMER GUIDELINES .........................................................................................................................................................20
WARRANTY ...............................................................................................................................................................................21
Three-Year Product Warranty ................................................................................................................................................ 21
3
4
How it works
The high-gain outside antenna captures even the weakest cell signal, from the cell tower where it is aimed.
The Fusion5X Max outside booster uses Extended Range Technology™ (ERT) to grab signal outside, at its strongest point, where it
boosts voice, text and data signals for all 4G & 5G devices.
Using ultra low-loss cable, signal is transmitted from the outside to the Fusion5X Max inside host amplier.
The signal is then broadcast from the inside panel antenna to all cellular devices in range.
The Fusion5X Max system also works in reverse, boosting the outgoing signal and to faraway and hard-to-reach towers.
PACKAGE CONTENTS
Unpack all package contents. For missing or damaged items, contact your reseller.
Turn over the signal booster and record the model and serial number for reference:
Serial #: ________________________________________________________________
Purchase Date: __________________________________________________________
Keep the carton and packing material to store the product in case you need to return.
Fusion5X Max inside
host amplier
Power supply
SC-232W Outside Yagi antenna
and mounting bracket
SC400-75NN
Inside Cable
(75ft x2)
SC-400-100NN
Outside Cable
(100 ft)
Your Fusion5X Max signal booster package includes the following items:
SC548W Inside panel
antennas (x2)
Fusion5X Max Outside
Amplier
and mounting bracket
Outside
Antenna Type
Outside
Cable Length
Inside Antenna Inside Cable
Model number Model name (Qty) Type (Qty) Length
SC-Fusion5X-Max-Y2U Fusion5X 2.0 Yagi / 2 Ultra-Thin Yagi 100 ft (2) Ultra-Thin (2) 75 ft
SC-Fusion5X-Max-Y2P Fusion5X 2.0 Yagi/ 2 Panel Yagi 100 ft (2) Panel (2) 75 ft
➊ ➋ ➌
➍
SC-528W
Inside Ultra-Thin antennas
(x2)
➎
OR
6
INSTALLATION
Step 1. Find the Area With the Strongest Signal
Identify the outside location with the strongest signal for placement of your outdoor yagi antenna. This is generally found on
the side facing your nearest cell tower and as high as possible -- where the antenna can ‘see’ your cell tower.
For help locating your closest cell tower, you may utilize an app such as ‘Open Signal’ or go to www.antennasearch.com.
Please note, The coverage area that the booster provides is directly related to the strength of incoming signal received by the
outdoor antenna. Mounting the outside antenna where the signal is the strongest provides the best results. if signal is extremely
weak where the outside antenna is installed, indoor coverage will be limited. Bars are not always a reliable measure of signal.
The best way to conrm signal coverage is the ability to place and hold a call.
Installation Overview
Before installation, review the above information.
In addition to the contents listed below, you will need a ladder, drill, cable clips, and a pole or mast to mount your outside
components. A mounting pole is available separately (SC-MOUNT-JBAR), if needed. Prior to securing the location of any
booster parts, a “soft install” is recommended as adjustments may be needed to optimize performance.
Step 1. Find the outside area with the strongest signal.
Step 2. Install the outside yagi antenna and outside amp in the location identied in step 1.
Step 3. Install the inside antennas -- either Ultra Thin™ or panel antennas (x2).
Step 4. Place inside host amp and connect cables
Step 5. Connect power source and turn on.
Step 6. Test system performance and optimize conguration as needed.
For more detailed measurements, you can take readings of your phone’s signal in decibels(dB). Decibels are measured in the
negatives and generally should fall between -40 and -130. A score closer to zero indicates a stronger signal. For example, a
signal of -120 dB indicates no service, while a score of about -50 dB means you have excellent signal.
For specic dB signal measurements, use the methods below.
• iOS - First turn off your Wi-Fi, Next, open the Phone app an dial *3001#12345#* then press the call button. This will open
the Field Test app. Once open, menu navigation varies depending on iOS version, as well as, carrier and iPhone model;
however these instructions should get you to the right place.
• iOS 14 and later: Navigate to LTE in the menu list then tap on Serving Cell Meas. The measurements that read
“rsrp0” and “rspr1” are your cellular signal strength in decibel-milliwatts.
• If you’re using an earlier version of iOS, we have more information available here: https://blog.surecall.com/enter-
eld-test-mode-on-iphone-or-android-phones/
• Android devices: Download the app “Network Signal Info” in the Google Play store.
Step 2. Install the Outside Yagi Antenna and Outside Amplier
Once you have identied the area of strongest signal, choose where you will mount your outside antenna and outside amplier
while considering the following factors:
1. The mounting area must have at least a 3 ft radius clear of obstructions, other radiating elements and metal objects such
as pipes or metal siding.
2. Both components should be mounted on a pole or pipe (not provided), at the highest possible location above the
rooine – at least 25 vertical feet above the planned location for the indoor antenna.
Note there are two main outside components -- a Yagi directional antenna and the outside amplier.
Warning: Do not collocate antennas or operate the outdoor antenna with any other antenna or signal booster.
Outside Cable
(100 ft)
Outside Yagi antenna
and mounting bracket Fusion5X Max outside amplier
and mounting bracket
➊ ➋ ➌
8
IMPORTANT:
Take caution during installation to not aim these antenna towards the other
antenna
Aiming Directional Antennas
➊
Install the Yagi antenna
Once you have identied your install location, assemble the u-bolt,
bracket, nuts and washers onto a pole (available separately) as shown in the
illustration.
Keep the connections loose enough to allow the antenna to rotate until the
optimum direction is found.
Orient the antenna with the drip hole at the bottom.
➋
Place the Outside Amplier
Next assemble the bracket for the outside amplier the same way you did
the yagi bracket and secure in the same location within range of the antenna
cable connection.
➌
Connect the yagi cable connector to the outside amplier as shown
here.
With both components in place, connect one end of the provided 75 ft. coax
cable to the outside amplier and hand tighten the connection.
Drip Hole
Outside system assembly
U-bolt
➊
➋
➌
Nut
Washer
L-bracket
Step 3. Install the Inside Antennas
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the outside antenna.
Consider the below factors affecting booster performance.
Signal strength at the location of the outside antenna.
Interior building materials between the inside antennas and your mobile device.
Distance between the outside antenna and inside antennas (minimum 25 ft. separation)
Ensure inside antennas point away from the outside antenna
Note: This booster should not be used near open re or ame. Storage and transportation: Store and place in non-extreme room-
temperature and dry environment.
For kits that include Inside Ultra Thin Antennas
The SC-588W wideband antenna is an omni-directional interior antenna that gathers and sends signals from all sides. Besides
the antenna itself, parts include mounting options for an install that is accessible by crawl space or one that is not. Optimally, It
should be located central to where signal is needed with minimal obstacles. The range of this antenna is dependent on three
factors:
1. Physical obstructions
2. Power generated by booster
3. Signal level received by the outdoor antenna
For Each Antenna:
If accessible by crawl space:
1. Drill a 20 mm diameter hole in the ceiling. The size should be large enough to
allow the antenna’s plastic cable base to pass through.
2. Place antenna cable through hole.
3. From crawl space, screw the xing nut onto antenna
If not accessible by crawl space, a metal bracket mount has been provided along with instructions for this mounting option.
Route Cable
1. Connect each indoor antenna to an indoor cable provided with your kit. Run
the cables along route toward the planned location of your booster.
Note: Be sure to provide enough separation from outdoor antenna (at least 25 ft. is
recommended).
RF ANTENNA
CABLE
THREADED MOUNT
CEILING
THREADED NUT
INDOOR
CABLE
10
For kits that include Inside Panel Antennas
The provided panel antennas are multi-band directional antennas with a 120˚ reach. They
should be mounted facing the area signal is needed. It is also important that they do not point
toward the outdoor antenna. Range of antenna is dependent on three factors:
1. Physical obstructions
2. Power generated by booster
3. Signal level received by the outdoor antenna
Besides the antenna itself, parts include mounting equipment for a at horizontal surface.
You can also install your interior antenna behind a wall or above a ceiling panel
provided there are not materials that could obstruct signals.
For Each Antenna:
1. Choose location for mounting antenna on vertical surface. Ideal height off
the ground or oor should be the approximate height of regular cell phone
use.
2. Using plate, mark position of desired screw placement with pencil or marker.
3. Screw mounting plate into place with the slide panel protruding towards you.
4. Slide antenna securely onto mounting plate.
Route Cable
Connect each indoor antenna to an indoor cable provided with your kit. Run the
cables along route toward the planned location of your booster.
Note: Be sure to provide enough separation from outdoor antenna (at least 25 ft.
is recommended).
RF CABLE
SC-400 FLAT SURFACE
MOUNTING PLATE
SCREWS
Andere Handbücher für Fusion5X
1
Inhaltsverzeichnis
Andere SureCall Extender Handbücher
SureCall
SureCall Fusion2Go Max Bedienungsanleitung
SureCall
SureCall Fusion5s 2.0 Omni/Dome Bedienungsanleitung
SureCall
SureCall Fusion4Home Omni/Panel Bedienungsanleitung
SureCall
SureCall Fusion2Go Max Bedienungsanleitung
SureCall
SureCall Fusion2Go Max Bedienungsanleitung
SureCall
SureCall GuardianA Handbuch
SureCall
SureCall Fusion 7 Bedienungsanleitung
SureCall
SureCall M2M Bedienungsanleitung
SureCall
SureCall EZBoost 3G Bedienungsanleitung
SureCall
SureCall SC-PolyO2-72 Bedienungsanleitung
SureCall
SureCall Fusion4Home 3.0 CA Bedienungsanleitung
SureCall
SureCall N-Range Bedienungsanleitung
SureCall
SureCall EZ Connect Bedienungsanleitung
SureCall
SureCall Flare 3.0 Bedienungsanleitung
SureCall
SureCall EZ 4GV Bedienungsanleitung
SureCall
SureCall Fusion4Home Omni/Panel Bedienungsanleitung
SureCall
SureCall FusionTrek Bedienungsanleitung
SureCall
SureCall SC5000-80-RM Bedienungsanleitung
SureCall
SureCall Fusion2Go Max Bedienungsanleitung
SureCall
SureCall Force5 2.0 Bedienungsanleitung
