Swann A856 Bedienungsanleitung

Professional HD

A856 Dome Camera

For use with Swann 4600 Series HD DVRs

EN INSTRUCTION MANUAL

Introduction

Congratulations on your purchase of this Profes-

sional HD A856 Dome Camera.

• A state of the art surveillance camera with

1080p video technology

• Seeing is believing with 1080p HD Cameras

(2 Megapixel) perfect for most locations

around home or business

• Latest infrared cut filter for amazing night vi-

sion to 82ft/25m for clarity in low light

• Sturdy polycarbonate camera construction

suits indoor & outdoor applications with IP66

rating for any weather conditions

• Deter thieves, safeguard loved ones, protect

your property & cut the cost of crime with

this professional surveillance camera from

Swann

Important instructions

1. Make sure the camera is fixed correctly and sta-

ble if fastened in place.

2. Only use the supplied power adapter (12V).

3. For use with Swann’s DVR4-4600, DVR8-4600 or

DVR16-4600 digital video recorders only.

Please note - Have a look at the camera location

tips included with your DVR, to select the best lo-

cation for your camera (the camera location tips

provided here are for general purpose only).

Important note - All jurisdictions have specific

laws and regulations relating to the use of cam-

eras. Before using any camera for any purpose,

it is the buyer’s responsibility to be aware of all

applicable laws and regulations that prohibit or

limit the use of cameras.

Connecting your Camera

1. Connect the Video Output and Power Input

connections on the camera to the corresponding

connections on the supplied Video & Power Cable.

Connect the video output on the Video & Power cable

to a spare video input on the DVR.

2. Connect the supplied Power Adapter to the power

input on the Video & Power Cable then connect the

Power Adapter to a spare wall socket. Press the wall

socket’s switch to the on position to supply power to

the camera.

Power Input

Video Output

Twist to lock

video connectors

Video Input

Video & Power Cable

Connect this to the DVR

Power Adapter

connects here

Power Output

Power Adapter

Connect to a spare

wall socket

PTZ

75 3 1

86 4 2

eSATA

HDMI LAN & USB B A DC 12V

VGAVIDEO IN AUDIO OUT

AUDIO IN

Digital Video Recorder

Dome Camera

Mounting the Camera

To mount the camera

1. The camera can be mounted onto a flat, vertical or

horizontal surface and must have sufficient strength

to hold the camera. Materials such as hardwood,

brick or masonry are good options.

2. Loosen the three screws located at the base of the

camera then remove the bracket cover and dome

cover.

3. Position the camera in the location you want to

mount it then mark the screw holes on the surface to

position the screws. Using the appropriate screws for

the surface you are mounting to, screw the bracket

into place.

4. If you’re mounting to a wooden surface, screw the

camera directly to the surface.

5. When mounting to a masonry surface, you’ll need

to use the included wall plugs.

Aiming the camera

1. Replace the dome cover and bracket cover.

2. The dome cover can be rotated left or right.

3. The camera can be aimed in almost any direction

from wherever you choose to mount it.

4. After you’ve finished adjusting the camera’s viewing

position, tighten each screw to lock the position in

place.

Positioning the cables

1. When running the cable, try to avoid bending it at

sharp angles.

2. Avoid positioning the cable live electrical wiring. AC

electricity generates radio noise which can interfere

with the signal from your camera.

3. Do not stretch or apply force to the cable greater

than 25lbs/11kgs.

Camera Location Tips

Some things to consider when choosing a location -

1. What you want to monitor and where you’ll get the

best view of it.

2. How you’re going to connect the camera to your

monitoring system; remember that cables and

connections should be kept out of the weather.

3. How to keep the camera out of harm’s way. It’s

recommended to mount your cameras at an elevated

position.

4. Place your camera as close to the area of interest

as practicable. The best position is from about 4m

(13ft) above looking slightly down, keeping in mind the

details you are looking for.

5. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach, make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6. Think about the most likely way a potential offender

may approach your home, use your cameras to give

you the best coverage of these areas.

7. The camera’s casing is resistant to water, different

weather conditions and tampering. It would take

an overwhelming event of this kind to damage the

housing of the camera. However, the cable and

connector are vulnerable and require protection.

8. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

9. When running your cable, try to avoid bending it at

sharp angles.

10. Don’t put your cable near live electrical wiring.

AC electricity generates radio “noise” which can

interfere with the signal from your camera.

Limited Warranty - Terms & Conditions

Swann Communications warrants this product

against defects in workmanship and material for

a period of one (1) year from its original purchase

date. You must present your receipt as proof of

purchase for warranty validation. Any unit which

proves defective during the stated period will be

repaired without charge for parts or labour or re-

placed at the sole discretion of Swann. The end

user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The

end user is responsible for all shipping costs in-

curred when shipping from and to any country

other than the country of origin.

The warranty does not cover any incidental, acci-

dental or consequential damages arising from the

use of or the inability to use this product. Any costs

associated with the fitting or removal of this prod-

uct by a tradesman or other person or any other

costs associated with its use are the responsibility

of the end user. This warranty applies to the origi-

nal purchaser of the product only and is not trans-

ferable to any third party. Unauthorized end user

or third party modifications to any component will

render all warranties void. By law some countries

do not allow limitations on certain exclusions in

this warranty. Where applicable by local laws,

regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees

which cannot be excluded under Australian Con-

sumer Law. You are entitled to a replacement

or refund for a major failure and for compensa-

tion for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of ac-

ceptable quality.

FCC Verification

This equipment has been tested and found to comply with the limits for Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause unde-

sired operation.

MA856CAM070815E | © Swann 2015

Helpdesk/Technical Support

Technical Support E-mail: [email protected]

Telephone Helpdesk

USA Toll Free 1-800-627-2799

USA Parts & Warranty 1-800-627-2799

(M-F, 9am-5pm US PT)

AUSTRALIA 1800 788 210

NEW ZEALAND Toll Free 0800 479 266

UK 0808 168 9031

Inhaltsverzeichnis

Andere Swann Sicherheitskamera Handbücher

Swann

Swann A850 Bedienungsanleitung

Swann

Swann MaxiBrite SW212-MXD Bedienungsanleitung

Swann

Swann DIY Security Cams SW216-2DS Bedienungsanleitung

Swann

Swann NHD-815 Bedienungsanleitung

Swann

Swann SwannOne Bedienungsanleitung

Swann

Swann PRO-680 Bedienungsanleitung

Swann

Swann PenCam SW234-PC2 Bedienungsanleitung

Swann

Swann C-500R Bedienungsanleitung

Swann

Swann CONNECT CAM 500 Bedienungsanleitung

Swann

Swann PRO-760 Leitfaden

Swann

Swann Pro MWADCAM150514T Bedienungsanleitung

Swann

Swann MAXI DAY/NIGHT CAM SR225-4MC-10006 Bedienungsanleitung

Swann

Swann SWIFI-FLOCAM2 Bedienungsanleitung

Swann

Swann DIY Security Cam SW211-DSC Bedienungsanleitung

Swann

Swann Dummy PIR Camera Bedienungsanleitung

Swann

Swann BulletCam SW213-BCC Bedienungsanleitung

Swann

Swann Big Dome Deterrent Bedienungsanleitung

Swann

Swann T3 Bedienungsanleitung

Swann

Swann Alpha C12 Bedienungsanleitung

Swann

Swann PRO-530 Bedienungsanleitung

Swann

Swann Slimline SWIFI-SLMFLCW Bedienungsanleitung

Swann

Swann PRO-720 Bedienungsanleitung

Swann

Swann SW223-SPR Bedienungsanleitung

Swann

Swann NHD-POE Series Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung