Swann Xtreem4K SWIFI-4KXTRM-GL Bedienungsanleitung
1
EN
SWIFI-4KXTRM-GL
4K Wire-Free Security Camera
Cámara de seguridad Xtreem4K™
Caméra de sécurité Xtreem4KMD
Telecamera di sicurezza Xtreem4K™
Xtreem4K™Überwachungskamera
EN Quick Start Guide ES Guía de inicio rápido FR Guide de démarrage rapide
IT Guida rapida DE Schnellstartanleitung
Xtreem4K™
2
EN
CAMERA OVERVIEW
Passive infrared
motion sensor
Threaded mounting hole
(for stand attachment)
Pull open rubber cover to access:
- Set (mini) button
- Reset button
- MicroSD card slot
32GB card pre-installed,
Max. 128GB card supported
LED indicator
SET button
Night detection
sensor
USB-C
charging port
Speaker
QR code
(for device pairing)
Microphone
Spotlight
Remove protective film covering the front of
the camera before use
Note: Keep the top and bottom rubber covers
closed when not in use to prevent water and
dust from entering.
Infrared LEDs
(for night vision)
3
EN
GET STARTED
Before using the camera for the first time, fully charge it with the included USB-C charging cable.
Charging the camera
To USB
Wall Charger
1Open the rubber cover on the bottom of the camera to
access the camera’s USB-C charging port.
2Insert the smaller end of the USB-C charging cable
into the camera’s USB-C charging port and the larger
end into a USB wall charger, such as the USB power
adapter that came with your smartphone.
3The LED indicator on the front of the camera turns
solid blue while charging and turns off once the
camera is fully charged. Actual charging times may
vary depending on the USB power supply and the
remaining battery level. A full charge may take up to
11 hours due to the camera’s large battery capacity.
4 Make sure to unplug the USB-C charging cable from
the camera and close the rubber cover tightly after
charging is done to keep out water and dust.
4
EN
DOWNLOAD THE SWANN SECURITY APP
1Download the latest version of the Swann Security app from the Google Play™ Store or Apple
App Store® on your Android or iOS mobile device. Simply search for "Swann Security". Or, you
can scan the QR code below to get the app.
2Open the app and create your Swann Security account by tapping “Not yet registered? Sign Up” at
the bottom of the screen. Then, activate your Swann Security account by confirming the verification
email sent to your registered email address.
5
EN
SET UP THE CAMERA
Launch the Swann Security app and sign in. Tap the Pair Device button on the screen (or tap the menu
icon in the top left and select Pair Device). The app will now guide you through the pairing process
to set up the camera with your Wi-Fi network.
Please note that the camera is only compatible with the 2.4GHz network. If your router is using the
5GHz band, ensure that it is operating in mixed mode.
6
EN
• The camera can be conveniently placed on a table or shelf, or mounted on a flat surface using
the provided stand. Because the camera is completely wire-free, you’ll have a lot of flexibility on
where you can install it.
• Select a location with strong, reliable Wi-Fi reception to ensure best video streaming and battery
performance. You can easily check this using your smartphone. Connect your smartphone to the
Wi-Fi network in the chosen spot and check if you have at least 2 bars of Wi-Fi signal.
• As a general rule, placing the camera closer to your router will result in better wireless
connection quality. If you’re finding the Wi-Fi signal to be weak or out of range, consider installing
a Wi-Fi range extender to boost the Wi-Fi coverage of your existing network.
CAMERA PLACEMENT
IMPORTANT: Ensure that the surface and
fixing points are strong enough to sustain
the weight of the camera and stand.
Installing the stand (Recommended installation height > 2m)
1. Remove mounting plate from the stand by rotating counterclockwise.
2a. If mounting to a wooden surface, screw mounting plate directly to the surface.
2b. If mounting to a masonry surface (brick, concrete), mark and drill holes,
insert wall plugs, and screw mounting plate to the surface.
3. Reattach the stand to mounting plate by rotating clockwise until secure.
mounting plate
screw (x2) size:
6.5mm x 25mm locking knob
Attaching the camera to the stand
Screw the camera to the stud on the stand, point the
camera in the desired direction, and then turn the locking
knob counterclockwise until it is tight enough to secure
the camera in position.
7
EN
HELP AND RESOURCES
Optimizing motion detection
The camera’s PIR motion sensor detects heat signatures of moving objects. You’ll generally get good
detection results by pointing the camera downwards at an angle where people will be moving across
the coverage area before heading directly towards the camera. You can turn motion detection on or off,
as well as adjust the motion detection sensitivity in the Swann Security app.
Camera LED indicator guide
Swann Security app manual
To learn more about using the Swann Security app, you can
download the manual from the App Menu > User Manual, or scan
the QR code for your mobile device on the right. The manual provides
detailed information on how to view live camera video, use 2-way
talk, playback and download motion recordings, and configure
various camera settings, including light duration, motion detection
sensitivity, modes, and more.
Rebooting the camera
On rare occasions, it might be necessary to reboot the camera if it becomes unresponsive. A simple
reboot can also quickly fix connectivity issues. To do this, use a paper clip to press and release the
Reset button. This will power off the camera. Then, briefly press the SET button for 1 second to boot up
the camera.
Solid Blue USB Charging
Solid Red Live streaming / Motion recording
Slow Blinking Blue Wi-Fi Pairing mode
Fast Blinking Blue Connecting to Wi-Fi
Infrared LEDs Blinking Firmware update in progress
iOS manualAndroid manual
8
ES
DESCRIPCIÓN GENERAL DE LA CÁMARA
Sensor de
movimiento
infrarrojo pasivo
Orificio ranurado de montaje
Abra la cubierta de goma para acceder a:
- Botón de configuración SET (pequeño)
- Botón de reinicio
- Ranura para tarjeta microSD
tarjeta preinstalada de 32 GB, tarjeta
compatible de 128 GB máx
Indicador LED
Botón de
configuración
SET
Sensor de
detección nocturna
Puerto de
carga USB-C
Altavoz
Código QR
(para emparejar el
dispositivo)
Antes de usarla, quite la película protectora
que cubre la parte delantera de la cámara
Aviso: Mantenga las cubiertas de goma
superiores e inferiores cerradas cuando no estén
en uso a fin de evitar el ingreso de agua y polvo.
Luces LED
infrarrojas
Micrófono
Foco
9
ES
PRIMEROS PASOS
Antes de usar la cámara por primera vez, cárguela durante dos horas como mínimo con el cable de
carga USB-C que viene incluido.
Cargar la cámara
A cargador
USB de pared
1Levante la cubierta de goma del puerto USB-C en la
parte inferior de la cámara.
2Inserte el extremo más pequeño del cable de carga
USB-C en el puerto USB-C de la cámara.Inserte el
extremo más grande del cable de carga USB-C en
un cargador de pared USB como el adaptador de
corriente USB que vino con su teléfono inteligente.
3El indicador LED ubicado en la parte delantera de la
cámara se vuelve azul para indicar que la cámara está
cargando. Cuando la cámara está totalmente cargada,
el indicador LED se apaga. El tiempo de carga podría
variar según la fuente de energía USB y del nivel
de batería restante. Una carga total puede tardar
11horas (debido a la gran capacidad de la batería de
la cámara).
4Una vez finalizada la carga, desconecte el cable de
carga USB-C de la cámara y asegúrese de cerrar bien
la tapa de goma para evitar la entrada de agua y polvo.
10
ES
OBTENER LA APLICACIÓN SWANN SECURITY
1Descargue la última versión de la aplicación Swann Security desde las tiendas de
aplicaciones App Store® de Apple o Google Play™ en su dispositivo iOS o Android. Para hacerlo,
solo tiene que buscar "Swann Security". O escanee el código QR a continuación.
2Abra la aplicación y cree su cuenta de Swann Security tocando “¿Todavía no está registrado?
Regístrese” en la parte inferior de la pantalla. A continuación, active su cuenta de Swann Security
a través del correo electrónico de verificación enviado a la dirección de correo electrónico con la
que se ha registrado.
Inhaltsverzeichnis
Sprachen:
Andere Swann Sicherheitskamera Handbücher
Swann
Swann BulldogCam SW224-BDC Bedienungsanleitung
Swann
Swann SwannOne SoundView SWO-SV02K Bedienungsanleitung
Swann
Swann MaxiBrite SW212-MXB Bedienungsanleitung
Swann
Swann C-500R Bedienungsanleitung
Swann
Swann Wireless Outdoor Cameras & Receiver Bedienungsanleitung
Swann
Swann SWO-SVC01K SoundView Bedienungsanleitung
Swann
Swann MaxiBrite Cam Bedienungsanleitung
Swann
Swann DIY Security Cam Bedienungsanleitung
Swann
Swann SW-P-ISDBN Hidden Camera Bedienungsanleitung
Swann
Swann Enforcer NHD-900BE Bedienungsanleitung
Swann
Swann SWNHD-818CAM Bedienungsanleitung
Swann
Swann EAGLE-EYE S232-WEE Bedienungsanleitung
Swann
Swann C-510R Bedienungsanleitung
Swann
Swann DVR16-8600 Combo Kurzanleitung
Swann
Swann Night Hawk Extra Wireless Outdoor Camera Bedienungsanleitung
Swann
Swann SW211-STY Bedienungsanleitung
Swann
Swann Dummy MaxiBrite SW215-DMX Bedienungsanleitung
Swann
Swann SWIFI-ALERTCAM Bedienungsanleitung
Swann
Swann Xtreem Bedienungsanleitung
Swann
Swann ADW-300 Bedienungsanleitung
