Swann NIGHTHAWK 3-Feb Kurzanleitung

BConnecting the receiver to record on a VCR

LINE IN

LINE OUT

VIDEO

AUDIO

VCR

Video

INPUTS Video

OUTPUT

Component

INPUTS

RECEIVER

Connect the A/V cable

from the receiver to

the VCR

D. Plug the power supply

into the receiver

Connect an A/V cable

from the Line OUTPUT

on the back of the VCR

Connect the A/V cable

to the INPUT on the

back of the TV

DViewing the cameras and recording to VCR

Power on the Receiver,

VCR and TV

Using your TV’s remote

control tune your TV to

the correct INPUT*. In our

example above the TV

should be set to INPUT 1

Using your VCR’s remote

control tune your VCR to

the LINE 1INPUT*

You should now see

your cameras on the

TV screen. Follow

your manufacturer’s

instructions to

record to your VCR

1. 2. 3. 4.

*Some VCR’s and TV’s will list this as INPUT, A/V, SOURCE, L1, Channel 0 - Consult your manufacturer’s manual for more information

1. Connect the AV cable to the back of the Receiver

2. Connect the AV cable to an available Video INPUT on TV

3. Tune TV to the correct INPUT* using TV remote

Connecting the receiver to your TV

Back of TV

Back of Receiver

INPUTS

Package Contents

2 or 3 NightHawk

Cameras

Packaging

Receiver

Remote Control

Hardware

AV Cable

Quick Start Manual

Camera Power

Supplies

Receiver Power

Supply

Nighthawk 2/3 Camera Kit Easy Setup Guide

www.swannsecurity.com6ZDQQ&RPPXQLFDWLRQV7ROO)UHH7HFKQLFDO6XSSRUW86$1 877 274 3695$XVWUDOLD1300 13 8324(PDLO[email protected]

HGeneral Installation Notes and Tips

1. Test the camera signal before permanently installing the cameras.

2. Using battery power is only recommended for testing purposes as the cameras do require constant power to operate.

3. IR or night vision will reflect off of glass or windows and overexpose the picture. Try placing cameras in direct line of

sight of your subject.

4. Never aim the camera directly at the sun as this can permanently damage the lens.

5. Never submerge the camera in water. Some shelter is recommended such as an awning or eave.

Camera Positioning

Achieving the highest quality signal

GFE

Wireless Internet

Cordless Phones/Mobiles

Some Electronic Devices

If you are still receiving interference change the

camera’s channel as per step Ethen switch the

receiver to the correct channel

If possible turn off or keep

the camera and receiver

away from wireless devices

Some wireless devices can

be set to different frequencies.

Consult the manufacturer’s

manual for details

A clear line of sight with little wireless

interference will always give you the

strongest picture

Walls and floors can also limit range and image results. Place the receiver in a location that

is relatively close to the camera’s position

Setting the Camera Channel

1. Find the seam running

around the middle of

the camera

2. Twist the front half of the

camera counter-clockwise

to remove the outer casing

3. Locate the small white

dip switches in the

upper left region of

the camera

4. Using your fingernail or pen,

move the dip switches up

or down to change to the

appropriate channel

Channel and Frequency Settings

Channel 1

2414MHz

Channel 2

2432MHz

Channel 4

2468MHz

Channel 3

2450MHz

Note: Wireless and electronic devices such as these can interfere with camera

transmission if they are within the cameras range.

Note: If your camera

has a hood, remove

the 2 screws first

Nighthawk 2/3 Camera Kit Easy Setup Guide

www.swannsecurity.com6ZDQQ&RPPXQLFDWLRQV7ROO)UHH7HFKQLFDO6XSSRUW86$1 877 274 3695, Australia - 1300 13 8324(PDLO[email protected]

Dieses Handbuch passt für folgende Modelle

Andere Swann Sicherheitssystem Handbücher

Swann

Swann Advanced Quad Processor Bedienungsanleitung

Swann

Swann DVR4-1000 Bedienungsanleitung

Swann

Swann SW276-ASL Bedienungsanleitung

Swann

Swann alpha Series Bedienungsanleitung

Swann

Swann DVR4-1100 Bedienungsanleitung

Swann

Swann SW351-MDA Bedienungsanleitung

Swann

Swann RedAlert SW244-WDW Bedienungsanleitung

Swann

Swann SW347-WAK Bedienungsanleitung

Swann

Swann DVR4-1200 Bedienungsanleitung

Swann

Swann SWIFI-ISIREN Bedienungsanleitung

Swann

Swann SecuraView Bedienungsanleitung

Swann

Swann SW347-WAK Bedienungsanleitung

Swann

Swann MALARM1301012E Bedienungsanleitung

Swann

Swann HD Pro-Series Bedienungsanleitung

Swann

Swann Alert DVR Camera Kit Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Swann

Swann SW244-LMP Kurzanleitung

Swann

Swann SW343-DP2 Bedienungsanleitung

Swann

Swann NVW-600CMB Bedienungsanleitung

Swann

Swann DIY Security Kit Bedienungsanleitung

Swann

Swann SW344-DPS Bedienungsanleitung

Swann

Swann GuardianEye Bedienungsanleitung

Swann

Swann SW212-HXD Bedienungsanleitung

Swann

Swann SWA44-D1C2M1 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung