Symbol CB3000 Bedienungsanleitung

No part of this publication can be modified or adapted in any way, for any purposes without permission in writing from

Symbol. The material in this manual is subject to change without notice.

Symbol reserves the right to make changes to any product to improve reliability, function, or design.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies, Inc.,

intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol

products.

Symbol, the Symbol logo are registered trademarks of Symbol Technologies, Inc.

IBM is a registered trademark of International Business Machine Corporation. Microsoft, Windows, and Windows NT are

registered trademarks of Microsoft Corporation. Novell and LAN Workplace are registered trademarks of Novell Inc. Toshiba

is a trademark of Toshiba Corporation. All other product names referred to in this guide might be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

Patents

This product is covered by one or more of the patents listed on the Website: www.symbol.com/patents

Contents

CB3000 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installing the CB3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Prerequisite Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Verifying the Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Verifying the Installation Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing the CB3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Displaying the CB3000 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting to the User Interface Using a Web Browser. . . . . . . . . . . . . . . . . . . 7

Connecting to the User Interface Using the Discovery Tool . . . . . . . . . . . . . . . . 9

Tips for Using the Discovery Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Configuring CB3000 WLAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configuring CB3000 Ethernet Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Configuring CB3000 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring CB3000 Basic Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Testing Device Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Where to Go From Here? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

CB3000 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Regulatory Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

CB3000 Client Bridge Install Guide

To the Installer

This guide is intended for the technician responsible for installing the CB3000 Client Bridge. It is also

assumed that the technician is familiar with Ethernet LAN-based networking concepts.

The purpose of this document is to provide specifications, features and guidelines for use during

default device installation and configuration. For advanced installation and configuration

instructions, refer to the CB3000 Client Bridge User Guide available on the CB3000 Product CDROM

shipped with the CB3000 and from the Symbol Website at:

http://www.symbol.com/services/manuals/

Document Conventions

Before working on any equipment, be aware of the hazards associated with its installation and use.

Also, become familiar with standard practices for preventing accidents.

NOTE Indicate tips or special requirements

CAUTION Indicates conditions that can cause equipment damage or

data loss.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

CB3000 Client Bridge Install Guide

CB3000 Overview

The Symbol CB3000 Client Bridge (Part No. CB-3000-0010-WWR) is an IEEE 802.11a/b/g compliant

wireless LAN Ethernet adapter. The CB3000 operates in both 2.4GHz (GigaHertz) and 5.2GHz

frequencies. The CB3000 extends wireless networking capabilities to printers, scales, medical

equipment, manufacturing machinery, bar code readers, time clocks, point-of-sale and other data

collection devices. The CB3000 provides a reliable, cost-effective interface between devices utilizing

Ethernet port and wireless LAN switches and access points.

Multiple devices can share one CB3000 using a 10/100Base-T Ethernet hub. This feature saves

equipment costs when several devices require wireless Ethernet connectivity. The CB3000 has an

on-board TCP/IP stack to provide a reliable data transport mechanism. The CB3000 can support up to

16 client connections (or one POS device connection) to your server. Use the CB3000 to network

devices that do not have a PC Card slot or PCI card slot (printers, scanners, etc.) to support wireless

LAN cards.

Installing the CB3000

Before installing the CB3000, review the guidelines in the sections that follow:

• Prerequisite Requirements

• Verifying the Package Contents

• Verifying the Installation Site.

Prerequisite Requirements

The following hardware and software resources are required to install and operate a CB3000 and use

the CB3000 Discovery Tool:

• PC to be used during device configuration. The PC must have an RJ-45 Ethernet port and a

CDROM drive. The PC must be running the following:

• Windows 2000 or XP operating system

• A browser interface running Internet Explore 5.0 (or higher) or Netscape 6.0 (or higher)

• An access point (for infrastructure mode operation) or a networked client (for Ad-hoc mode

peer-to-peer operation).

Verifying the Package Contents

Before installing the CB3000, verify the package contains the following:

• CB3000 Installation Guide (this guide)

• CB3000 Software and Documentation CDROM

• CB3000 Client Bridge (Part No. CB-3000-0010-WWR)

• Ethernet cable

• Power adapter with 4 localized plugs

• Detachable omni-directional 802.11a/b/g antenna.

• Mounting hardware.

CAUTION Only qualified and approved antennas may be used with the CB3000.

NOTE Contact the Symbol Support Center to report any missing or improperly

functioning components.

CB3000 Client Bridge Install Guide

Verifying the Installation Site

Mounting options for the CB3000 include table top, wall or under a counter mounting using the

keyholes and mounting hardware provided with the unit.

Before installing the CB3000, verify the installation site meets the following requirements:

• The Environmental Specifications as defined in the “Technical Specifications on page -23”

section of this guide.

• The site should have access to a properly rated power source.

• The site should be dry and within 100 meters of the device(s) (hub, telephone, computers,

point-of-sale) to be connected to the CB3000.

• The site should not be near other equipment (transformers, fluorescent lights etc.) that could

interfere with the CB3000’s radio transmissions.

• The site should be within 250 ft. of the wireless access point the CB3000 is targeting

for association.

Installing the CB3000

Cable and test the CB3000 before moving it to its table top, wall or under a counter operational

location. To cable the CB3000:

NOTE A cross-over cable is not required to directly connect the CB3000 to a PC.

CAUTION Do not connect a CB3000 (set to Infrastructure mode) directly to the

LAN supporting the WLAN the CB3000 is using (for example, through

a wall port). Such a connection could cause a transmission loop

between the CB3000 and its associated access point, disrupting

network connectivity.

1. Screw the antenna clockwise onto the antenna connector on the rear of the CB3000.

2. Attach one end of an Ethernet cable to a RJ-45 jack on a computer or hub.

3. Connect the other end of the Ethernet cable to the LAN connector on the rear of

the CB3000.

4. Plug the power adapter into the DC-IN connector on the rear of the CB3000.

5. Connect the plug end of the power adapter into a power outlet.

The power adapter automatically selects and adjusts the power for the appropriate voltage

for worldwide use.

NOTE The back of the CB3000 also contains a Kensington lock mechanism for

attaching the CB3000 to an immovable objects in order to prevent theft.

CAUTION Only use the power adapter supplied by Symbol with the CB3000.

Using an incorrect power adapter could damage the CB3000 and void

the product warranty.

NOTE The CB3000 can use either a crossover or straight through cable.

CB3000 Client Bridge Install Guide

6. Verify the installation by checking the status of the LEDs on the front of the CB3000.

The CB3000 Power, Radio and LAN LEDs provide the following status indications:.

Power LEDs Activity Description

Error OFF No errors detected

Orange ON Hardware error

Status OFF Power OFF

Green ON Power ON/Device ready

Green Blinking Booting, system self-test or firmware

upgrade

When the CB3000’s LED functionality has been verified, launch the CB3000’s user interface to begin

the basic device configuration outlined within this guide.

Radio LEDs Activity Description

802.11a

802.11b/g

OFF Connectivity disabled

802.11a Orange ON 802.11a radio connectivity

Orange

Blinking

802.11 a radio traffic

802.11b/g Green ON 802.11b/g radio connectivity

Green Blinking 802.11b/g radio traffic

LAN LEDs Activity Description

100 Mbps

10 Mbps

OFF No Ethernet activity

100 Mbps Orange ON 100 Mbps connection over LAN

Orange

Blinking

100 Mbps transmit/receive

10 Mbps Green ON 10 Mbps connection over LAN

Green Blinking 10 Mbps transmit/receive

Andere Handbücher für CB3000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Symbol Drahtloser Zugangspunkt Handbücher

Symbol

Symbol AP-5131 Installations- und Betriebshandbuch

Symbol

Symbol Spectrum24 Installations- und Betriebshandbuch

Symbol

Symbol AP-51xx Installations- und Betriebshandbuch

Symbol

Symbol Spectrum24 AP-3020 Bedienungsanleitung

Symbol

Symbol AP-5131 Installations- und Betriebshandbuch

Symbol

Symbol AP-51 Series Installations- und Betriebshandbuch

Symbol

Symbol AP 300 Bedienungsanleitung

Symbol

Symbol Spectrum24 AP-4100 Series Installations- und Betriebshandbuch

Symbol

Symbol AP-5131 Bedienungsanleitung

Symbol

Symbol AP 100 Bedienungsanleitung

Symbol

Symbol Spectrum24 AP-41X1-1050 HR Bedienungsanleitung

Symbol

Symbol AP 200 Bedienungsanleitung

Symbol

Symbol IEEE 802.11A/B Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung