Synology NAS DS3622xs+ Handbuch

Synology NAS DS3622xs+

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DS3622xs+ at a Glance 4

System Modes and LED Indicators 6

Other LED Indicators 8

Hardware Specication 9

Spare Parts 10

Optional Accessories 10

Safety Instructions 11

Chapter 2: Hardware Setup

Tools and Parts for Component Installation 12

Install Drives 12

Add a Memory Module to Synology NAS 15

Install PCle Add-in Cards 17

Start up Your Synology NAS 20

Chapter 3: System Maintenance

Replace System Fan 21

Chapter 4: Install DSM on Synology NAS

Install DSM with Web Assistant 23

Learn More 23

Synology_HIG_DS3622xs+_20210621

Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your Synology NAS.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

RJ-45 LAN cable x 2

Screws for 2.5" drives x 52

Hard drive tray key x 2

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DS3622xs+ at a Glance

No. Article Name Location Description

1 STATUS Indicator

Front

Displays the status of the system. For more information, see

"System Modes and LED Indicators".

2 ALERT Indicator Displays warnings regarding fan or temperature. For more

information, see "Other LED Indicators".

3 Power Button

1. Press to power on your Synology NAS.

2. To power o󰀨 your Synology NAS, press and hold until you

hear a beep sound and the Power LED starts blinking.

4 LAN Indicator Displays the status of the network connection. For more

information, see "Other LED Indicators".

5 DRIVE Status

Indicator

Displays the status of each drive. For more information, see

"Other LED Indicators".

6 Drive Tray Install drives (hard disk drives or solid state drives) here.

7 Drive Tray Lock Lock or unlock drive trays.

5Chapter 1: Before You Start

No. Article Name Location Description

8 Power Port

Back

Connect power cord here.

9 Fan Disposes of excess heat and cools the system. If the fan

malfunctions, the Synology NAS will emit a beeping sound.

10 PCI Express

Expansion Slot Supports one PCIe x8 slots (x8 link) add-on card.

11 Reset Button

1. Mode 1: Press and hold until you hear a beep sound to restore

the IP address, DNS server, and password for the admin

account to default.

2. Mode 2: Press and hold until you hear a beep, release the

button immediately, then press and hold again until you hear

three beeps to return the Synology NAS to "Not Installed"

status so that DiskStation Manager (DSM) can be reinstalled.

For detailed information on how to reset your Synology NAS,

please refer to this article.

12 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology

NAS here.

13 Console Port This port is used for manufacturing only.

14 Expansion Port Connect Synology Expansion Unit1to the Synology NAS here.

15 Management Port This port is used for out-of-band management only.

16 1GbE RJ-45 Port Connect RJ-45 network cable here.

17 10GbE RJ-45 Port Connect RJ-45 network cable here.

1 For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.

6Chapter 1: Before You Start

System Modes and LED Indicators

System Modes and Denitions

There are 7 system modes in Synology NAS. The system modes and their denitions are as below:

System mode Denition

Powering on Synology NAS is powering on and performing hardware initialization, such as

hardware reset or BIOS initialization.

Shutting down Synology NAS is shutting down as a result of pressing the power button or operation

in DSM.

DSM not ready

DSM is not ready for use. This could either be:

• Synology NAS is powered on, but DSM is not properly installed.

• Synology NAS is currently powering on and initializing services necessary for

DSM to fully function.

• The attached UPS device has insu󰀩cient power; DSM stops all services to

prevent data loss (enters safe mode).

DSM is ready for use DSM is fully functioning and users can sign in.

Hibernation Synology NAS has been idle for a while and is now in Hibernation mode.

Application

Certain packages/services (e.g., USB Copy and Find me service) while in operation

will control the actions of the LED. After the operation is complete, the LED indicator

will return to its normal state.

Powered o󰀨 Synology NAS is powered o󰀨.

Identify System Modes

You can identify the system mode through the POWER and STATUS LED indicators. Please refer to below table

for more details.

System mode

LED Indicator

POWER STATUS

Blue Green Orange

Powering on Blinking O󰀨 O󰀨

Shutting down Blinking Static O󰀨

DSM not ready Static Blinking O󰀨

DSM is ready for use Static Static O󰀨

Hibernation Static O󰀨 O󰀨

Application Static Switching

Powered o󰀨 O󰀨 O󰀨 O󰀨

7Chapter 1: Before You Start

Transitions between System Modes

To better understand the transition between system modes, please refer to below examples:

• Powered on with no DSM installed:

Powered o󰀨 > Powering on > DSM not ready

• Powered on with DSM installed:

Powered o󰀨 > Powering on > DSM not ready > DSM is ready for use

• Enter hibernation then wake up from hibernation:

DSM is ready for use > Hibernation > DSM is ready for use

• Shutdown Synology NAS:

DSM is ready for use > Shutting down > Powered o󰀨

• Power failure with UPS attached:

DSM is ready for use > DSM not ready (due to power failure, DSM enters safe mode) > Shutting down >

Powered o󰀨 > Powering on (power has recovered, DSM will reboot)> DSM not ready > DSM is ready for use

8Chapter 1: Before You Start

Other LED Indicators

LED Indicator Color Status Description

DRIVE status

Green

Static Drive ready and idle

Blinking Accessing drive

Orange Static Drive error/Port disabled1

O󰀨 No internal Drive

ALERT

Red Blinking System error2

O󰀨 System normal

Rear 1GbE LAN

(on upper side of jack)

Green

Static

1 Gbps connected

Orange 100 Mbps connected

O󰀨 10 Mbps connected/No network

Rear 1GbE LAN

(on lower side of jack)

Green

Static Network connected

Blinking Network active

O󰀨 No network

Rear 10GbE LAN

(on upper side of jack)

Green

Static

10 Gbps connected

Orange 1 Gbps connected

O󰀨 100 Mbps connected/No network

Rear 10GbE LAN

(on lower side of jack)

Green

Static Network connected

Blinking Network active

O󰀨 No network

Note:

1 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's

diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in

S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical

Support for help.

2 If the ALERT LED continuously blinks red, this indicates there are system errors such as fan failure,

system overheating, or volume degrade. Please sign in to DSM for detailed information.

9Chapter 1: Before You Start

Hardware Specication

Item DS3622xs+

Compatible Drive Type 2.5"/3.5" SATA x 12

External Port • USB 3.2 Gen 1 x 2

• Expansion port x 2

LAN Port

• 1GbE RJ-45 for OOB x 1

• 1GbE RJ-45 x 2

• 10GbE RJ-45 x 2

PCIe Slot Gen3 x8 slot (x8 link) x 1

Size (H x W x D) (mm) • 270 x 300 x 340

Weight (kg) 9.8

Supported Client

• Windows 7 onwards

• macOS 10.12 onwards

File System

• Internal: Btrfs, ext4

• External: Btrfs, ext4, ext3, FAT32, NTFS, HFS+, exFAT1

Supported RAID Type

• Basic • JBOD • RAID 0 • RAID 1

• RAID 5 • RAID 6 • RAID 10 • Synology RAID F1

Agency Certication • FCC Class B • CE Class B • UKCA • BSMI Class B

• EAC • VCCI • RCM • KC • UL • RoHS Compliant

HDD Hibernation Yes

Scheduled Power On/O󰀨 Yes

Wake on LAN Yes

Language Localization

Environment Requirement

• Line voltage: 100 V to 240 V AC

• Frequency: 50/60 Hz

• Operating Temperature: 32 to 104˚F (0 to 40˚C)

• Storage Temperature: -5 to 140˚F (-20 to 60˚C)

• Relative Humidity: 5% to 95% RH

Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.

1Support for exFAT can be enabled by purchasing and downloading exFAT Access in Package Center.

10 Chapter 1: Before You Start

Spare Parts

Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply

units

Model Name Picture Description

Disk Tray (Type D6) 3.5"/2.5" Drive Tray With Lock

FAN 120*25_6 System Fan 120*120*25 mm x 2

PCS Installed In Frame

PSU 550W_1 SFX PSU 550W

Optional Accessories

With Synology accessories, you can customize your Synology NAS to t di󰀨erent business environments without

worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.

Inhaltsverzeichnis

Andere Synology Computerhardware Handbücher

Synology

Synology DS1813+ Handbuch

Synology

Synology DiskStation DS215+ Bedienungsanleitung

Synology

Synology DiskStation DS2415+ Bedienungsanleitung

Synology

Synology NAS RS822+ Handbuch

Synology

Synology RXD1219sas Handbuch

Synology

Synology RX1213sas Bedienungsanleitung

Synology

Synology DX1222 Handbuch

Synology

Synology M2D18 Handbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung