Synology DVA3219 Handbuch

Synology Network Video Recorder DVA3219

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology Network Video Recorder at a Glance 4

Safety Instructions 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation 6

Install Drives 6

Start Up Your Network Video Recorder 9

Add a RAM Module on Network Video Recorder 10

Replace System Fan 13

Chapter 3: Install DSM on Network Video Recorder

Install DSM with Web Assistant 15

Learn More 15

Appendix A: Specications

Appendix B: LED Indicator Table

Synology_HIG_DVA3219_20190220

Thank you for purchasing this Synology product! Before setting up your new Network Video Recorder, please

check the package contents to verify that you have received the items below. Also, make sure to read the safety

instructions carefully to avoid harming yourself or damaging your Network Video Recorder.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

RJ-45 LAN cable x 2

Screws for 2.5” hard drives x 18

Hard drive tray key x 2

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology Network Video Recorder at a Glance

No. Article Name Location Description

1 Drive Status Indicator

Front

Displays the status of the installed drive. For more information, see "Appendix

B: LED Indicator Table".

2 Drive Tray Lock Lock or unlock drive trays.

3 Drive Tray Install drives (hard disk drives or solid state drives) here.

4 Status Indicator Displays the status of the system. For more information, see "Appendix B:

LED Indicator Table".

5 Alert Indicator Displays warnings regarding fan or temperature. For more information, see

"Appendix B: LED Indicator Table".

6 LAN Indicator Displays the status of the network connection. For more information, see

"Appendix B: LED Indicator Table".

7 Power Button

1. Press to power on the Network Video Recorder.

2. To power o󰀨 the Network Video Recorder, press and hold until you hear a

beep sound and the Power LED starts blinking.

8 USB 3.0 Port Connect external hard drives or other USB devices to the Network Video

Recorder here.

9 Fan

Back

Disposes of excess heat and cools the system. If the fan malfunctions, the

Network Video Recorder will emit a beeping sound.

10 eSATA Port 1 Connect external SATA drive or Synology Expansion Unit1to the Network

Video Recorder here.

11 LAN Port Connect network cables here.

12 USB 3.0 Port Connect external hard drives or other USB devices to the Network Video

Recorder here.

13 eSATA Port 2 Connect external SATA drive or Synology Expansion Unit1to the Network

Video Recorder here.

14 Kensington

Security Slot Attach a Kensington security lock here.

15 Power Port Connect the AC power cord here.

16 COM Port Connect a POS device here.

17 RESET Button

1. Press and hold until you hear a beep sound to restore the default IP

address, DNS server, and password for the admin account.

2. Press and hold until you hear a beep sound, then press and hold again

until you hear three beep sounds to return the Network Video Recorder

to “Not Installed” status so that DiskStation Manager (DSM) can be

reinstalled.

1For more information about Synology Expansion Unit supported by your Network Video Recorder, please visit www.synology.com.

5Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Drive Installation

• A screwdriver (only for 2.5" drives)

• At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Press the lower part of the hard drive tray to pop out the handle.

2 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray.

Hardware Setup

Chapter

7Chapter 2: Hardware Setup

3 Load drives in the drive trays.

• For 3.5” drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

• For 2.5” drives: Remove the fastening panels from the sides of the drive tray and store them in a safe

place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten

the screws to secure the drive in place.

8Chapter 2: Hardware Setup

4 Push the upper part of the loaded hard drive tray and insert it into the empty hard drive bay.

Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

5 Press the handle in ush with the front panel to hold the hard drive tray in place.

6 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the

handle of the hard drive tray, and then remove the key.

7 Repeat the steps above to assemble the other drives you have prepared.

8 Drives are numbered as shown below.

Note: If you want to create a RAID volume, we recommended that all installed drives are of the same size to make

the best use of drive capacity.

9Chapter 2: Hardware Setup

Start Up Your Network Video Recorder

1 Use the LAN cable to connect the Network Video Recorder to your switch, router or hub.

2 Connect the AC adapter to the power port of the Network Video Recorder. Connect one end of the AC power

cord to the AC power adapter, and the other to the power outlet.

3 Press the power button.

Congratulations! Your Network Video Recorder is now online and detectable from a network computer.

10 Chapter 2: Hardware Setup

Add a RAM Module on Network Video Recorder

The optional Synology DDR4 RAM module is designed for Network Video Recorder memory expansion. Follow

the steps below to install, check, or remove a RAM module on your Network Video Recorder.

To install the RAM module:

1 Shut down your Network Video Recorder. Disconnect all cables connected to your Network Video Recorder to

prevent any possible damages.

2 The RAM modules are located at the bottom of DVA3219.

3 Remove the 2 screws that secure the bottom panel. Lift o󰀨 the panel and place it to the side. You will see there

is one pre-installed 4G RAM module.

Important: When you remove the panel, you expose sensitive internal components. Avoid touching anything other

than the memory assembly when you remove or add memory.

Inhaltsverzeichnis

Andere Synology Netzwerk-Hardware Handbücher

Synology

Synology RackStation RS18017xs+ Handbuch

Synology

Synology DS116 Bedienungsanleitung

Synology

Synology RackStation RS2416+ Bedienungsanleitung

Synology

Synology BeyondCloud Bedienungsanleitung

Synology

Synology EDS14 Bedienungsanleitung

Synology

Synology NAS RS4021xs+ Handbuch

Synology

Synology DS115 Bedienungsanleitung

Synology

Synology DS1520+ Handbuch

Synology

Synology DVA3221 Handbuch

Synology

Synology RackStation RS217 Handbuch

Synology

Synology NVR216 Bedienungsanleitung

Synology

Synology DX517 Bedienungsanleitung

Synology

Synology NVR1218 Handbuch

Synology

Synology DiskStation DS1517 Handbuch

Synology

Synology SA6400 Bedienungsanleitung

Synology

Synology DiskStation DS216 Bedienungsanleitung

Synology

Synology USB Station 2 Bedienungsanleitung

Synology

Synology RX415 Bedienungsanleitung

Synology

Synology RX1217sas Handbuch

Synology

Synology RX1217 Handbuch

Synology

Synology DiskStation DS216+II Bedienungsanleitung

Synology

Synology DiskStation DS1815+ Bedienungsanleitung

Synology

Synology DS411j Bedienungsanleitung

Synology

Synology DS107 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung