Syscom Video IR Bullet Network Camera Bedienungsanleitung
INSTRUCTION MANUAL
IR Bullet
Network Camera
Please read this manual thoroughly before use, and keep it handy for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT
THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE
EQUIPMENT.
Apparatus shall not be exposed to dr ipping or splashing a nd that no objects fille d
with liquids, such as vases, shall be placed on the apparatus.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
2
FCC COMPLIANCE STATEMENT
INFORMATION TO THE USER:THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
CAUTION:CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.
4
17. ITE is to be connected only to PoE networks without routing to the outside
plant.
Contents
1. Description ------------------------------------------------------------------6
1.1 Components - ------------------------------------------------------------------------------------------ 6
1.2 Key Features - ------------------------------------------------------------------------------------------ 7
1.3 Layout ---- ------------------------------------------------------------------------------------------ 8
2. Installation ----------------------------------------------------------------- 9
2.1 Camera Installation ---- ------------------------------------------------------------------------------- 9
2.2 Network Connection and IP Assignment ---------------------------------------------------------- 10
3. Operation -------------------------------------------------------------------- 11
3.1 Access from a browser -------------------------------------------------------------------------------- 11
3.2 Access from the internet ------------------------------------------------------------------------------ 12
3.3 Setting the admin password over a secure connection ------------------------------------------- 12
3.4 Live View Page ----------------------------------------------------------------------------------------- 13
3.5 Network Camera Setup-------------------------------------------------------------------------------- 15
3.5.1 Basic Configuration ---------------------------------------------------------------------------- 15
1) Users------------------------------------------------------------------------------------------ 16
2) Network -------------------------------------------------------------------------------------- 19
3) Video & Image ------------------------------------------------------------------------------ 17
4) Video & Image ------------------------------------------------------------------------------ 18
5) Audio------------------------------------------------------------------------------------------ 20
6) Date & Time --------------------------------------------------------------------------------- 21
3.5.2 Live View --------------------------------------------------------------------------------------- 22
3.5.3 Video & Image---------------------------------------------------------------------------------- 23
3.5.4 Audio --------------------------------------------------------------------------------------------29
3.5.5 Event ------------------------------------------------------------------------------------------ 30
1) Event-In -------------------------------------------------------------------------------------- 30
1) Event-Out ------------------------------------------------------------------------------------ 35
2) Event Map------------------------------------------------------------------------------------ 42
3.5.6 System ------------------------------------------------------------------------------------------ 44
1) Information ---------------------------------------------------------------------------------- 44
2) Security--------------------------------------------------------------------------------------- 45
3) Date & Time --------------------------------------------------------------------------------- 48
4) Network -------------------------------------------------------------------------------------- 49
5) Language------------------------------------------------------------------------------------- 58
6) Maintenance --------------------------------------------------------------------------------- 58
7) Support --------------------------------------------------------------------------------------- 59
3.5.7 About ------------------------------------------------------------------------------------------ 62
3.6 Playback----------------------------------------------------------------------------------------------------62
3.7 Help ------------------------------------------------------------------------------------------------------ 64
3.8 Resetting to the factory default settings ------------------------------------------------------------- 65
4. Appendix -------------------------------------------------------------------- 66
4.1 Troubleshooting ----------------------------------------------------------------------------------------- 66
4.2 Preventive Maintenance -------------------------------------------------------------------------------- 67
4.3 Product Specification------------------------------------------------------------------------------------ 68
5
1. Description
The Network Camera supports the network service for a sensor image with progressive scan, which
can be monitored on a real-time screen regardless of distances and locations. By using its dedicated
program, many users are able to have an access to the Network Camera at once or a single user can
monitor various network cameras at the same time. It also enables users to play, store and retrieve a
monitoring image by using a PC. All the settings and real-time monitoring screens are also provided
through an access to the web.
The Network Camera is fully featured for security surveillance and remote monitoring needs. It is
based on the DSP compression chip, and makes it available on the network as real-time, full frame
rate Motion JPEG and H.264 (or MPEG-4) video streams.
1.1 Components
The system comes with the following components:
Mini Camera Installation CD Installation Guide Accessory Kit
Notes:
1. Check your package to make sure that you received the complete system, including all
components shown above.
2. Adapter for DC 12V is not supplied.
6
1.2 Key Features
• Brilliant video quality
The Network Camera offers the highly efficient H.264 video compression, which drastically
reduces bandwidth and storage requirements without compromising image quality. Motion JPEG
is also supported for increased flexibility.
• Triple streams
The Network Camera can deliver triple video streams simultaneously at full frame rate in all
resolutions up to 1600 x 1200 using Motion JPEG and H.264 (or MPEG-4). This means that
several video streams can be configured with different compression formats, resolutions and
frame rates for different needs.
• Image setting adjustment
The Network Camera also enables users to adjust image settings such as contrast, brightness
and saturation to improve images before encoding takes place.
• Micro-SD Recording support
The Network Camera also supports a micro-SD memory slot for local recording with removable
storage.
• Improved Security
The Network Camera logs all user access, and lists currently connected users. Also, its full frame
rate video can be provided over HTTPS.
• Built-in Microphone
The Network Camera provides an integrated microphone.
• Megapixel Resolution
Max 15fps@1600x1200
• PoE
This network camera can be powered through PoE, which simplifies installation since only one
cable is needed for carrying power, as well as video controls.
• ONVIF
This is a global interface standard that makes it easier for end users, integrators, consultants,
and manufacturers to take advantage of the possibilities offered by network video technology.
ONVIF enables interoperability between different vendor products, increased flexibility, reduced
cost, and future-proof systems.
7
1.3 Layout
• Connection Cable
NO Name Description
1 Power Cable Cable for Power source (DC 12V)
2 Ethernet Cable Cable for Ethernet (POE)
Camera Dimension
See the diagrams below for the exact dimension
Dimensions Unit: mm
8
2. Installation
2.1 Connection
Base Installation(Cable through the wall or ceiling with the mount base)
Secure the camera to the wall or ceiling by the camera stand (individual purchase).
Ceiling Mount W all Mount
•Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for connection
to a hub.
Micro SD memory slot
Remove the front cap of the camera to insert the SD memory card.
SD memory card slot
Remove the front cap
• Connecting the Power
Connect the DC 12V power adaptor to the camera.
9
2.2 Network Connection and IP assignment
The Network Camera supports the operation through the network. When a camera is first connected
to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the
“Smart Manager” utility on the CD. (Default IP 192.168.30.220)
1. Connect the Network Camera / device to the network and power up.
2. Start SmartManager utility (Start>All programs>SmartManager>SmartManager), the main
window will be displayed, after a short while any network devices connected to the network will
be displayed in the list.
3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu
below.
4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address.
Note: For more information, refer to the Smart Manger User’s Manual.
10
Andere Handbücher für IR Bullet Network Camera
1
Inhaltsverzeichnis
Andere Syscom Video IP-Kamera Handbücher
