System Q CCT513 Bedienungsanleitung

www.kovert.com Doc XCCT513

CCT513 Hi-Res Vari-focal Colour Dome Camera Instructions

Email: support@kovert.com

Features

·Hi-Res 530 TVL

·Futuristic design

·The dome is fitted with a 3.5-8mm Vari-focal lens.

·Domes are for internal ceiling mount fitting.

·Video and power connected via a fly lead.

Camera Specifications

CCT513

Camera Spec Hi-Res Colour –12V DC

Image Sensor 1/3”Colour

Image Output 1Vpk-pk 75W

Resolution 530TVL

Min Illumination 0.5 Lux @ F1.6

Input Voltage Range 12V DC ±10%

Power Consumption 220mA / 2.65W

Lens 3.5-8 mm Vari-focal

AGC Automatic

AWB Automatic

Size Dia 128 x H96mm

Installation Instructions

Connecting dome to 12v DC power

The camera is provided with a 2.1mm Mini Jack plug on a fly lead that allows you to connect the power supply to it.

When powering these dome cameras with a 12V DC power supply, ensure that the supply is regulated. It is

recommended to use a power supply that is rated higher than the current consumption of the camera i.e. allows 25% -

30% minimum headroom, so for these cameras a minimum requirement would be a continuous rating of 300mA or

higher per camera. This prevents the PSU from running at its maximum rating for long periods of time. A POW150

or higher is recommended.

The CCT513 is an attractively designed dome

camera with an exceptional 530 TVL

resolution. The 3.5-8 mm vari-

focal lens gives

the flexibility to adjust the angle of view from

a wide-angle general shot to

a more narrow

precise shot. This unit is 12v DC and is ideal

for internal ceiling mount fitting. The dome

camera comes complete with a short BNC

plug and 2.1 mini jack for video and power

connections. The futuristic design of the

CCT513 would make it ideal

for any modern

office or retail environment and its high spec

make it a good choice for bars or clubs.

www.kovert.com Doc XCCT513

CCT513 Hi-Res Vari-focal Colour Dome Camera Instructions

Email: support@kovert.com

Connecting the camera to video control equipment.

The dome camera comes with a fly lead for power and video out. To reduce installation time the video out lead is

terminated into a male BNC connector. This allows the installer to effortlessly connect the camera to control

equipment via a female BNC-BNC lead.

Remember that the Video out from the camera is like any other electrical circuit and requires two wires to complete

the circuit. When using a co-ax type cable such as RG59 or similar, the outer braid of the co-ax provides the “0V

GROUND”connection and the inner core provides the “Video”connection.

It is recommended that when you are first setting up the cameras that you use a short

BNC-BNC cable to link the camera directly to the monitor and to set it up at the

same time. This allows you to both understand the camera and get the very best out

of this great product, as you will be able to adjust the camera whilst looking at the

monitor screen. Obviously whilst you are setting up the camera, it does need to be powered!

Securing the dome

First select a suitable position to mount the dome. This must be an internal installation and fitted to a ceiling.

Unscrew the dome housing from the base by turning anti-clockwise.

Make a hole in the ceiling to take the video and power cables and secure the base using mounting screws.

Rotate the camera base, set camera angle of view and then refit dome cover. Secure the dome cover with the retaining

screw.

All specifications are approximate. Kovert.com reserves the right to change

any product specifications or features without notice. Whilst every effort is

made to ensure that these instructions are complete and accurate, kovert.com

cannot be held responsible in any way for any losses, no matter how they arise,

from errors or omissions in these instructions, or the performance or non-

performance of the equipment that these instructions refer to.

Inhaltsverzeichnis

Andere System Q Sicherheitskamera Handbücher

System Q

System Q Kovert SEE900 Bedienungsanleitung

System Q

System Q IP-CAM705 Bedienungsanleitung

System Q

System Q PTZ280 Bedienungsanleitung

System Q

System Q SEE820 Bedienungsanleitung

System Q

System Q PTZM600 Bedienungsanleitung

System Q

System Q SEE850 Bedienungsanleitung

System Q

System Q Zip IPCND705 Bedienungsanleitung

System Q

System Q RoboPlate ROBOPCZ22 Series Bedienungsanleitung

System Q

System Q PCB820 Bedienungsanleitung

System Q

System Q CAM526UW Bedienungsanleitung

System Q

System Q CAM300 Bedienungsanleitung

System Q

System Q PTZ800 Bedienungsanleitung

System Q

System Q Zip SEE852 Bedienungsanleitung

System Q

System Q ZIP IPCAI918 Bedienungsanleitung

System Q

System Q Zip SEE858 Bedienungsanleitung

System Q

System Q PTZ900 Bedienungsanleitung

System Q

System Q NiteDevil 24C IPCND705 Bedienungsanleitung

System Q

System Q Kovert SEE902 Series Bedienungsanleitung

System Q

System Q Kovert SEE906 Series Bedienungsanleitung

System Q

System Q NiteDevil 24C Bedienungsanleitung

System Q

System Q NiteDevil SEE705 Bedienungsanleitung

System Q

System Q VisionPlus vari focal CCT555 Bedienungsanleitung

System Q

System Q CCT455 Bedienungsanleitung

System Q

System Q CCT465 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung