System Q ScatterBox POE308 Bedienungsanleitung

10 Port 100Mbps PoE Switch

ScatterBox is a registered trademark of System Q Ltd

POE308 - Quick Start Guide

www.systemq.com/PDF

/manual/xPOE304.pdf

A PoE switch is a network switch which

has power over Ethernet built-in.

The PoE switch will detect whether the

load device is PoE compatible and

provide PoE power automatically and

network connection.

The unitsadd extra flexibility to a network

infrastructure thanks to 100 metre run

capabilities both in and out of them.

User Information

The PoE Switch must be installed in a clean, dry

environment where it will not be exposed to high

temperatures, moisture or excessive dust.

Do not touch the PoE Switch or any of its connections

with wet hands.

Ensure the power is switched off if the PoE Switch is not

in use for a long period of time.

There are no user serviceable parts in the PoE Switch

and opening or attempting to repair the product will

void the warranty.

Only use the PSU originally supplied with the product.

Do not install or use the device if the power cable is

damaged.

The Switches have different uses and setup options. Including providing power to PoE Cameras, and

providing network access to devices like computers.

Setup Options

Option 1

To power IP Cameras using the PoE switch

then connect the IP Cameras using

CAT5e/CAT6 Ethernet Cable, for longer

distances we recommend using high

quality cable, with solid copper cores. cores.

Option 2

Provide network infrastructure to PoE and non-

PoE Devices, like computers, and other Network

devices..

2This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated

WEE/CG0783SS collection point as defined by your local council.

All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is

made to ensure that these instructions are complete andaccurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise,

from errors or omissionsin these instructions,or the performance or non-performance of the equipment refered to.

10 Port 100Mbps PoE Switch

ScatterBox is a registered trademark of System Q Ltd

LED Status Indicators

LED

Condition

Status

Power

The switch is receiving power

Off

The switch is not receiving power

Network / Link

The port is connected

Off

No connection to the port

Flashing

The port is transmitting or receiving data

The VLAN switch allows separation between ports. As default VLAN is off, when VLAN is on

ports on the different blocks won’t be able to see each other. Note that the UPLINK does see

all ports so the separation is only between ports.

Troubleshooting

Problem

Possible Cause

Solution

No Power light on

Switch

No power to the device

Check power to device from external source. Check that

the power lead (IEC lead) is plugged in to the PSU and

the PSU is plugged into the switch.

Loose connection

Check that the power lead (IEC lead) is plugged in to the

PSU and the PSU is plugged into the switch.

Network light not

flashing

Poor quality cable or

termination

Check the Ethernet cabling to your device is of good

quality and is terminated correctly.

Connected devices

not powering

Poor quality cable or

termination

Check the Ethernet cabling to your device is of good

quality and is terminated correctly

Total power

consumption exceeded

Check the load devices are not above the total power

consumption of the switch.

Cable length

Check the distance of Ethernet cable to your device.

Ethernet cables have a 100m maximum length.

Slow flashing LEDs,

No network on load

devices

Faulty cable or device

Turn the power off to the switch & unplug the load

devices (Check Ethernet cabling to load devices). Leave

the switch turned off for 10 seconds and then power the

switch back up, plug each device back into switch

individually to help troubleshoot the suspect cable.

Downlinks

8 x RJ45

Uplinks

2 x RJ45

PoE

30W (Max per port)

Power

120W (Whole device maximum)

Bandwidth

10Mbps / 100Mbp

Use

Internal Use Only

Working Temperature

0°C ~ 40°C

Power Input

240V AC (Lead supplied)

Dimensions

(w)210 x (d)136 x (h)44.5mm

Andere System Q Schalten Handbücher

System Q

System Q HDM170 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung