TabLines TWH Benutzerhandbuch
EN
Mounting instruction
Please read the assembly instruction before installing and set-up! This will protect and
prevent the product from damage.
TabLines TWH tablet wall mount
EN
Mounting instruction TabLines TWH tablet wall mount - Version Nr. 2021-03
2
Fig. 3 screwing the housing
1.5 Inserting the tablet
Position the tablet between the insert strips (the
insert strips are supplied already glued and included
in the scope of delivery).
Make sure that the home button on the tablet is on the
side / position you prefer.
1.4 Screw on housing
Fasten the housing with four screws and, if necessary,
dowels to match your wall. You can obtain these from
an appropriate specialist dealer.
Check that all screws are tightened securely.
Fig. 4 inserting the tablet
Fig. 1 adjusting the housing
Fig. 2 marking the holes for drilling
1.2 Marking and drilling the holes
Mark the drill holes in the recesses provided in the
housing of the TabLines TWH Tablet wall mount.
Then drill the four holes.
1.1 Adjusting tablet enclosure
Remove the magnetic frame from the case and put it
aside.
Hold the case in either portrait or landscape position.
Level the TWH wall mount with a spirit level.
1. Wall mounting
EN
Versionsnr. 2016-08 - Montageanleitung TabLines TWE Tablet WandeinbauVersion Nr. 2021-03 - Mountng instruction TabLines TWH tablet wall mount 3
Fig. 5 attaching the magnetic frame
2.1 Cable routing through the rear
If you wish to install your TWH directly above a power
socket, the charging cable can be led out through the
opening which is provided in the housing. In this case,
spacers must be fitted between the wall and the
housing. Spacers are included in the scope of delivery
by prior arrangement.
1.6 Attaching the magnetic frame
Now position the magnetic frame on the housing and
press it down carefully.
The tablet is ready for use in the TabLines TWH wall
mount / enclosure.
2.2 TecLines TNT001 wall mounting power supply
To charge your tablet in the TWH Tablet wall mount,
we recommend the TecLines TNT001 power supply for
permanent charging.
Due to its compact form, the TecLines TNT001 can be
integrated into conventional flush-mounted switch
boxes (System 55) and screwed to the housing of the
wall mount.
Fig. 6 optional cable routing
Fig. 7 optional power supply
2. Optional cable routing / power supply
Changes reserved
TabLines
Am Marienhof 8
22880 Wedel
Germany
E-Mail: info@tablines.com
Web: www.tablines.com
Tel.: +49 (0) 4103 / 90387 - 0
Fax: +49 (0) 4103 / 90387 - 11
Contact us
Your TabLines dealer / specialist partner
Mountinginstruction
TabLines TWH tablet wall mount
Andere TabLines Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
