TAD EVOLUTION Series Bedienungsanleitung

TAD-DA1000T X

D / A CONVER TER

CON V ER T ISSEUR N / A

D/A-WANDLER

CONVERTITORE D/ A

CON V ER T IDOR D / A

數位類比轉換器

O WNER ’S M ANUA L

MODE D’EMPLOI

BEDIENUNGSA NLEI T UNG

M A NUALE D ’IS T RUZIONI

M A NUAL DE INS T RUCCIONES

用戶手冊

WARNING

This equipment is not waterproof

. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture.

D3-4-2-1-3_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat radiation

(at least 10 cm at top, 10 cm at rear

, and 10 cm at each

side)

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product,

and to protect it from overheating.

To prevent fire

hazard, the openings should never be blocked or

covered with items (such as newspapers, table-cloths,

curtains) or by operating the equipment on thick carpet

or a bed.

D3-4-2-1-7b*_A1_En

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER

-SERVICEABLE

RTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL. D3-4-2-1-1_B1_En

WARNING

prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

D3-4-2-1-7c*_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on

. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

rvice center or your dealer for a replacement.

S002*_A1_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which requires

repair will be charged for even during the warranty

period.

K041_A1_En

CAUTION

The switch on this unit will not completely shut off

all power from the AC outlet. Since the power plug

serves as the main disconnect device for the unit,

you will need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit has

been installed so that the power plug can be easily

disconnect from the AC outlet in case of an accident.

To avoid fire hazard, the power plug should also be

disconnect from the AC outlet when left unused for a

long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

English

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

10)

Only use attachments/accessories specified by

the manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

D3-7-13-69_En

11)

12)

13)

14)

U.S. model only

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1b_A1_En

TAD-DA1000TX

U.S. model only

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

CAUTION

This product satisfies FCC regulations when shielded

cables and connectors are used to connect the unit

to other equipment. To prevent electromagnetic

interference with electric appliances such as radios

and televisions, use shielded cables and connectors

for connections.

D8-10-3a_A1_En

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_A1_En

English

TAD-DA1000TX

U.S. model only

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

CAUTION

This product satisfies FCC regulations when shielded

cables and connectors are used to connect the unit

to other equipment. To prevent electromagnetic

interference with electric appliances such as radios

and televisions, use shielded cables and connectors

for connections.

D8-10-3a_A1_En

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_A1_En

European model only

U.S., Canada model only

PRECAUTIONS IN USE

Installation Location

For installation, select a stable location near the television or

stereo system with which the unit will be used.

To ensure long product life, avoid installing this

unit in the following locations:

• Locations exposed to direct sunlight

• Humid or poorly ventilated areas

• Areas of extreme temperatures

• Areas with vibration

• Dusty or smoky areas

• Areas exposed to grease fumes, steam or heat

(such as a kitchen)

Do not place objects on top of the unit

Do not place objects on top of the unit.

To prevent adverse affects of heat

Do not install the unit on top of amplifiers or other

components that generate heat. When installing in a

rack, try by all means to install the unit in a position below

amplifiers or other components that generate heat.

Turn off power when not in use

Depending on the signal condition of television broadcasts,

if the television is turned on when the unit is already on, a

noise may appear on the television screen. Audible noise

may likewise occur when listening to the radio when unit

is already turned on. This phenomenon does not indicate a

malfunction of either the television, radio tuner, or the unit.

In this event, turn off the power to the unit.

Maintenance

To clean the unit, use a polishing cloth to gently wipe the

unit’s surface to remove dust. If the surface is extremely

dirty, wipe with a soft cloth dipped in neutral cleanser diluted

five to six times with water and wrung out well. Do not use

volatile chemicals such as paint thinner or benzenes, as

these may corrode the surface of the panels. Do not use

sprays such as insecticides around the unit. If you plan on

using a chemical cleaning cloth, read the precautionary

statements of the chemical cleaning cloth before using.

English

CONTENTS

PRECAUTIONS IN USE .........................................................................................................................................6

Installation Location.........................................................................................................................................................................6

Maintenance .....................................................................................................................................................................................6

INTRODUCTION ...................................................................................................................................................8

Inspiring the joy of listening ............................................................................................................................................8

Features.............................................................................................................................................................................8

BEFORE YOU START............................................................................................................................................9

Checking what’s in the box..............................................................................................................................................9

Inserting the battery .........................................................................................................................................................9

NAMES OF PARTS AND THEIR FUNCTIONS .....................................................................................................10

Main unit front panel......................................................................................................................................................10

Main unit rear panel.......................................................................................................................................................11

Remote Control Unit ......................................................................................................................................................12

INSTALLATION AND CONNECTIONS ................................................................................................................13

Installation.......................................................................................................................................................................13

Connecting up ................................................................................................................................................................14

SPECIAL SETTINGS.............................................................................................................................................16

Changing the unit input mode ......................................................................................................................................16

Adjusting the sound volume..........................................................................................................................................16

To fix the line output levels at their maximum.............................................................................................................16

Changing the display mode...........................................................................................................................................16

USB connections (default settings)..............................................................................................................................17

U1 (AudioClass 1.0)........................................................................................................................................................................17

U2 (AudioClass 2.0)........................................................................................................................................................................17

Listening with suppressed DSD signal output ............................................................................................................18

ECO (power saving) mode .............................................................................................................................................18

ALL RESET.......................................................................................................................................................................18

TROUBLESHOOTING..........................................................................................................................................19

SPECIFICATIONS ................................................................................................................................................21

Thank you for buying this TAD product. Please read through these operating instructions so you will know how to operate your

model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

INTRODUCTION

Inspiring the joy of listening

Technical Audio Devices Laboratories, Inc. (TADL) grew from the spirit to discover technologies to perfectly recreate the pure

sound of live performances with uncompromising craftsmanship. We have inherited our philosophy from Bart Locanthi—

recognized across the globe as the ultimate sound technologist—who believed that genuine technology is true to the basics

and that genuine technology places greater importance on sound quality than on technology for its own sake.

At TADL, we are honing our technology to create equipment that reproduces musical sounds that evoke both the energy and

impact of live music.

Features

Adopting the newly developed 3rd generation USB engine

The operating delay of the FPGA internal circuit was significantly reduced, the low-level distortion characteristic was improved

and moreover the PCM signal responds to the sampling frequency up to 384 kHz and the bit count up to 32 bits. The DSD

signal DoP system transmission responds to the maximum sampling frequency of 11.2 MHz.

Equipped with the line output volume as the digital media center

As the line output volume is mounted, a simple system can be configured only by connecting a power amplifier. With a variety

of media supported, it is recommended to use this device as a digital media center dedicated to pursuing the pleasure of

enjoying the finest sound quality. The unit is also furnished with an independent headphones volume controller.

Ultra-high C/N* ratio Master Clock featuring UPCG**

Reduction of the total amount of master clock jitter has been previously suggested as a means of attaining even higher levels

of sound quality, TAD Labs has taken this a step further, focusing on reduction of jitter in the low-frequency sideband ranges

relative to the center frequencies, and to that end, a new Ultra-high-Precision Crystal Generator (UPCG) has been developed.

Based on technologies developed for high-speed digital base-station relay facilities, the master clock with its dedicated

oscillators and high-purity conductivity deliver the ultimate performance demanded by a CD player, allowing it to reproduce to

perfection the signals engraved on the disc.

*C/N: Carrier-to-Noise ratio

**UPCG: Ultra-high-Precision Crystal Generator

Twin Differential D/A Converters

Twin Burr-Brown digital-audio converters are connected in parallel for improved audio performance in all metrics, including

S/N ratio, linearity, dynamic range, and distortion. These features allow even delicate audio signals to be played back faithfully,

creating a greater degree of breadth in musical reproduction.

Power unit

This unit has the analog unit and digital unit, each of which is equipped with a specialized large-scale toroidal transformer

characterized by high response performance, combining strong dynamism and low noise.

High-Rigidity Construction with Low Center of Gravity

Highly rigid aluminum chassis suppresses effects from external vibrations. Placement of the massive heavy base has been

designed to lower the center of gravity, thus further reducing vibrations. These design elements have made it possible to

reproduce music signals with great stability while avoiding the vibration caused by speaker pressure and other sources.

High-precision D/A converter

Signal conversion is performed through a high-precision D/A converter and sampling rate converter, with reclocking

performed by an ultra-high-purity master clock.

ISO mount technology

This unit has adopted an insulator with the spike structure inherited from the reference series.

Thus, another level of vibration control was implemented.

Experience the fusion of a high-dimensional sound image and acoustic field with unparalleled resolution.

English

BEFORE YOU START

Checking what’s in the box

Please check that you have received the following supplied accessories in the accessory box.

'Remote control unit x 1

DAC DISP

VOLUME

MUTE

D/A CONVERTER

USB

INPUT

'Operating Instructions

(this document)

'Sheet x 3

(This sheet is for preventing

scratches on floors, etc. by the

insulator. Please use it if necessary.)

'Power cord (U.S., Canada model)

'Power cord (Europe, Asia model)

2 pins plug type (For use in Europe

except in the UK)

3 pins plug type (For use in the UK,

Singapore, Malaysia, Hong Kong)

Inserting the battery

1 2 3

Replace the batteries when you notice a reduction in the operating range of the remote control unit.

WARNING

'Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can

cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.

'Do not place batteries in locations accessible to infants or small children. If accidentally swallowed, consult medical

attention immediately.

CAUTION

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

'Never use new and old batteries together.

'Whenloadingbatteriesintothebatterycase,donotbendthebatterycase’sminus(−)terminalwiththeendofthebattery,

since it could cause a short circuit, leakage of battery fluid, and/or unnatural heating.

'Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

'Use type AAA (SUM-4) Manganese (R03) or Alkaline (LR03) dry cell batteries.

'When not using the remote control for a long period of time (1 month or more), remove the batteries from the remote

control, to prevent damage from inadvertent leakage. If battery leakage occurs, wipe up any battery exudate from inside the

case and replace with new fresh batteries.

'When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules

that apply in your country or area.

Use type AAA (SUM-4)Manganese (R03) or Alkaline (LR03) dry cell batteries.

Sheet use example

Sheet

Main unit front panel

1 2 3

510

7 83

NAMES OF PARTS AND THEIR FUNCTIONS

1 

Power button

Use to set power to ON/standby mode.

2 Power indicator

Lights to indicate the unit’s power status.

Lighted yellow: ON (unit can be operated).

Off: Standby (indicates power cord is connected and unit

is in standby mode).

3 INPUT button

Use to select the input source.

4 VOL (−/+) buttons

Use to adjust sound volume at the unit’s line output

connectors.

Note

'These buttons are deactivated in their ALL RESET

status, and output is fixed at its maximum value.

To activate these buttons, hold the VOL (

−

)button

depressed for several seconds.

5 Display

The display provides graphic information about the unit’s

many operations and functions.

6 Remote control sensor

Point remote control unit at this sensor to operate.

Effective distance is within about 7 meters (23 ft.).

7 DISP button

Use to change or hide information items shown in the

display.

8 MUTE button

Press to temporarily turn off playback sound.

9 Headphones VOLUME (−/+) buttons

Use to adjust the headphone sound volume.

10 Headphones jack

Insert headphones jack here.

CAUTION

'When using the volume function and connecting directly to a power amplifier (without using a pre-amplifier), be sure

to make the connection only after setting the volume to “0” (zero). If the connection is made with the volume set to a

large value, an excessive sound volume is generated to damage the speaker or your hearing ability.

'All the displays are turned off by controlling the switches on the main unit or remote controller (if attached). But, the

power supply is not stopped. To completely block the device from the power supply, it is necessary to disconnect the

power plug (breaker) from the power outlet. Place this device near the power outlet by allowing the power plug (breaker)

to be easily accessible.

'When going on vacation, or otherwise leaving the unit unused for an extended period of time, the power plug should be

disconnected from its power outlet.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere TAD Medienkonverter Handbücher

TAD

TAD DA1000 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung