Taga Harmony TA-600MULTI Bedienungsanleitung

TA-600MULTI

CUSTOM INSTALL

4-ZONE STEREO AMPLIFIER

Instruction manual

Edition 12-2018

Introduction

Thank you for purchasing this TAGA Harmony amplier.

The TA-600MULTI is a perfect solution for residential as well as commercial

installations in restaurants, pubs, shops, conferencing rooms, tness clubs for both

background music and voice playback systems.

A single TA-600MULTI amplier allows to build cost-e󰀨ective multi-room audio

installation and play di󰀨erent music in each of 4 zones (from 3 inputs) with independent

volume and sound control for each, and to broadcast voice messages to selected

zones simultaneously.

High and constant power is delivered by an oversized, audiophile grade 200W toroidal

transformer.

The TA-600MULTI integrated amplier o󰀨ers the nest music performance at this

price level and perfect matching with most speakers available in the market. It

utilizes advanced materials, state of the art engineering and innovate design by an

international team of professional designers. It delivers pure and distortion-limited

power as well as rich sound performance with stunning accuracy, soundstage and

sensational dynamics.

A variety of features and wired connections makes the TA-600MULTI a very versatile

device with ability to work in di󰀨erent application:

• Multi-room sound. 4-zone, high-power stereo amplier able to drive four pairs of

speakers (from 4 to 16ohms) – a cost-e󰀩cient and easy way to deliver sound to many

rooms;

• Each zone with independent: source audio input selection (out of 3 onboard), volume

and sound (treble / bass)regulations to play individual music at di󰀨erent volume levels

in separate rooms;

• Built-in microphone input with a mixing and echo control - is a perfect solution for

voice broadcasting to selected zones;

• USB input to quickly and easily play music from USB ash driver (supports MP3 /

WMA / WAV / APE les) for almost endless playback;

• MP3 (3.5mm stereo jack) input on the front panel to quickly connect a smartphone,

tablet or laptop;

• RCA stereo input at the rear to hook additional equipment like a CD player, radio

tuner or other analog devices;

• Force-air cooling is specically designed for long working tim.

The removable IEC power cable gives you an option to upgrade your system with a

premium power cable in any time.

Cleaning

Do not use strong or abrasive cleaners. Use a damp, soft cloth for cleaning.

Specications

Full technical specications are available on the www.TagaHarmony.com website.

Contents

Safety Instructions 4

Important Safety Instruction 5

Front and Rear Panel 6

Hooking up speaker cable 7

Hooking up the amplier 7

Operation 9

Specications 11

Safety Instructions

IMPORTANT

READ THIS SECTION CAREFULLY BEFORE PROCEEDING!

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS FILLED WITH

LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE

THE FUSE ONLY WITH THE SAME AMPERAGE AND VOLTAGE TYPE. REFER

REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.

WARNING: UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE

VENTILATION TO ALLOW FOR COOLING. DO NOT PLACE NEAR A HEAT

SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

An exclamation mark in a triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

The triangle containing a lightning symbol is intended to alert the user to the presence

of uninsulated dangerous voltages within the product’s enclosure that may be of

su󰀩cient magnitude to constitute a risk of electric shock to persons.

Important Safety Instructions

Front and Rear Panel

Front Panel

1. Power Switch (ON and OFF) and Power Status Indicator (around the Power Switch)

INDIVIDUAL FOR ZONE 1 / ZONE 2 / ZONE 3 / ZONE 4

2. Treble Regulator

3. Bass Regulator

4. Microphone Switch (ON and OFF)

5. Microphone Status LED Indicator

6. Volume Regulator

7. Input Selector (OFF, USB, AUX, MP3)

8. Microphone ¼” Jack Input

9. Microphone Level Regulator

10. Microphone Echo Regulator

11. MP3 3.5 mm Mini Jack Stereo Input

12. USB Input Status LED Indicator

13. USB Knob (Play/Pause, Next/Previous)

14. USB Stick Input

Rear Panel

15. AUX Stereo RCA Input

INDIVIDUAL FOR ZONE 1 / ZONE 2 / ZONE 3 / ZONE 4

16. Speaker Group ZONE Right Channel Output (Speaker Connectors)

17. Speaker Group ZONE Left Channel Output (Speaker Connect)

18. Power Cable Input and Fuse

Note! A blown fuse should be only exchanged for exactly the same type as indicated on the

rear amplier panel. The Power Cable should be disconnected!

The Speaker Connectors can accommodate up to 10AWG speaker cables as well

as most of popular plugs (banana etc.). A 10AWG cable is recommended for longer

connections (longer than 20 meters / 66 feet). For shorter lengths you can use 12/14 or

18 AWG cables. It is recommended to leave about 150 cm (5 feet) of extra cable at the

amplier end to facilitate positioning and installation of the amplier. Do not use staples,

nails or other metal objects to secure the cables. You will get the best sound quality and

least amount of hum by keeping the cables away from other electrical wires and cables.

Pay attention to connecting the polarity of the amplier correctly with the speakers in each

speaker group (speakers should be connected RED + with RED + amplier connector,

BLACK – with BLACK – amplier connector).

Before connecting make sure that your amplier is turned o󰀨. Please refer to your

speaker instruction manual for more information.

Hooking up Speaker Cables

Hooking up the Amplier

1. Make sure the amplier is turned o󰀨 (the Power Switch

and the Power Cable is removed).

2. Turn the Volume Regulator of each ZONE to MIN (max counter clockwise).

3. Using speaker cables (not supplied with this product) connect your speakers to

SPEAKERS OUT (choose the ZONES you want to use) connectors located on the

rear of the amplier (check „Hooking Up Speaker Cables” for more details).

4. If you want to play an analog audio source device (CD player, satellite or FM tuner,

video console etc.): using RCA interconnect cables (not supplied with this product)

connect it to the analog AUX input on the rear of the amplier.

5. If you want to play an analog audio source equipped with 3.5 mm stereo analog

audio output (or compatible) like a smartphone, tablet, laptop etc. : using a stereo

analog interconnect cable with 3.5 mm mini jack (not supplied with this product)

connect it to the analog MP3 input on the front of the amplier.

6. If you want to play a digital audio les connect a USB stick (not supplied with this

product) to the USB Stick Input on the front of the amplier. Make sure that this

amplier supports the les you want to play.

7. If you want to broadcast voice using a microphone (not supplied with this product)

connect it to the Microphone ¼” Jack Input on the front of the amplier.

8. Your amplier is ready for operation.

Note! Avoid to short-circuit of cables – it can damage this amplier or speakers. This

may void your warranty.

Hooking up the Amplier

Use only 4 ~ 16 ohms impedance speaker.

Note! Only speakers of the same impedance can be used for a single ZONE (for exam-

ple: ZONE 1: if you use 4ohm speakers in the left channel then you have to use 4ohm

speakers in the right channel) – otherwise this amplier or speakers can be damaged.

This may void your warranty.

Each ZONE can use di󰀨erent impedance of speakers (for example ZONE 1 can use

4ohm speakers, ZONE 2 8ohm speakers, ZONE 3 6ohm speakers etc.).

Microphone USB stick

Smartphone,

tablet, laptop,

etc.

Operation

1. Plug the Power Cable to the amplier and into the electrical outlet.

2. Turn on the amplier – press the Power Switch (the Power Switch should be in the

d o w n p o s i t i o n ).

The status LED around the Power Switch should turn orange in a few seconds. If

it does not, it means that the amplier is working under an abnormal condition (a

protection mode) – turn o󰀨 the power, unplug the Power Cable and check whether

some of the cables are not short circuited. After xing the cables turn the amplier

on.

3. For each ZONE which you want to use, using the Input Selector knob select which

audio source you want to play (corresponding to the selected input).

4. Turn on your audio source and start playback.

5. For each ZONE regulate volume on the amplier to adjust the level of sou.

Play from USB stick:

This amplier can play music from most USB sticks and supports most MP3 / WMA /

WAV / APE audio les.

1. Using the Input Selector knob select the USB input in each ZONE you want to play

music from the USB stick.

2. Insert the USB stick into the USB Input socket located on the front of the amplier.

3. When compatible music les are detected then the playback will start automatically

in the selected ZONES.

In the Play mode the USB Input Status Led Indicator will illuminate continuously.

If the USB stick is empty or contains non-supported les the USB Input Status

Indicator will start ashing.

4. Press the USB Knob ►▌▌ once to pause the playback. Press it again to resume the

playback.In the Pause mode the USB Input Status Led Indicator will start flashing.

5. Rotate the USB Knob ►►▌ clockwise to play the next song. If the last song is detec-

ted the playback will start from the rst one on the USB stick (check “Order of le

playback”).

6. Rotate the USB Knob ▐◄◄ counter clockwise to play the previous song. If the rst

song is detected the playback will start from the last one on the USB stick (check

order of le playback).

Order of le playback:

The music les are always played in accordance with their alphabetical order on the

USB stick and its folders. Usually the playback starts from the les stored directly on

the USB stick (which are not placed in the folders) and then the playback is continued

for the les stored in the folders according to a folder order on the USB stick.

Note! Depending on a USB stick type, format and number or arrangements of folders

and les some music les will be played di󰀨erently or will not be recognized by the

amplier.

Operation

Operations available individually for each ZONE:

Volume Regulator:

For each ZONE you can adjust the sound volume from minimum (the knob – max

counterclockwise) to maximum (the knob – max clockwise). Distortion and sound

quality worsening may occur when the knob is in the maximum position. It may damage

the amplier or speakers. This may void your warranty.

Bass Regulator:

For each ZONE you can adjust bass output of the amplier. The default: the knob

is in the center position : the marker on the knob in the vertical position. Turn the

knobcounterclockwise (-) to decrease the amount of low frequencies. Turn the

knobclockwise (+) to increase the amount of low frequencies (+).

Treble Regulator:

For each ZONE you can adjust treble output of the amplier. The default: the knob

is in the center position : the marker on the knob in the vertical position. Turn the

knobcounterclockwise (-) to decrease the amount of high frequencies. Turn the

knobclockwise to increase the amount of high frequencies (+).

Input Selector:

For each ZONE you can select one of three available audio inputs (USB, AUX, MP3).

If you do not want to play any music from these audio inputs in the ZONE, move the

Input Selector knob to OFF.

The Input Selector works independently to the Microphone Switch – you can broadcast

only music or only voice from microphone or mix both.

Microphone Switch (MIC ON / MIC OFF):

For each ZONE you can broadcast voice from the microphone (not supplied with this

product) – separately or mixed with the background music from the audio inputs (USB,

AUX, MP3).

The Mic Switch is in the top position OFF - the voice from the microphone is not

transmitted to the ZONE (the Microphone Status LED Indicator will not be illuminated).

The Mic Switch is in the down position ON - the voice from the microphone is

transmitted to the ZONE (the Microphone Status LED Indicator will be illuminated).

If the audio input is selected (check “Input Selector” for more details) and the

background music is playing, the voice from the microphone and the music will be

mixed. Make sure to adjust Microphone Level and Echo Regulators to control the

microphone functions.

Note! The voice from the microphone will be simultaneously broadcasted to all

ZONES. If you do not want it to be transmitted to a certain ZONE make sure to switch

o󰀨 the MIC Switch for the ZONE.

Andere Handbücher für TA-600MULTI

Inhaltsverzeichnis

Andere Taga Harmony Verstärker Handbücher

Taga Harmony

Taga Harmony HTA-2000B Bedienungsanleitung

Taga Harmony

Taga Harmony TTP-300 Bedienungsanleitung

Taga Harmony

Taga Harmony TTA-500 Bedienungsanleitung

Taga Harmony

Taga Harmony THDA-500T Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-800B Bedienungsanleitung

Taga Harmony

Taga Harmony TA-400MIC Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-700B v.3-USB Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-2000B v.2 Bedienungsanleitung

Taga Harmony

Taga Harmony TA-900MULTI Bedienungsanleitung

Taga Harmony

Taga Harmony TCA Series Bedienungsanleitung

Taga Harmony

Taga Harmony TA-400MIC Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-600B Bedienungsanleitung

Taga Harmony

Taga Harmony TTA-1000 Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-800 Bedienungsanleitung

Taga Harmony

Taga Harmony TA-250MIC Bedienungsanleitung

Taga Harmony

Taga Harmony TA-25Mini v.2 Bedienungsanleitung

Taga Harmony

Taga Harmony TA-600MULTI Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-1000B Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-25B Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-700B v.3 Bedienungsanleitung

Taga Harmony

Taga Harmony TA-250MIC v.2 Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-1200 Bedienungsanleitung

Taga Harmony

Taga Harmony HTA-2500B Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung