Tamron B011 Bedienungsanleitung

18-200mm F/3.5-6.3

Di III VC for E-Mount of Sony's NEX series mirrorless compact

interchangeable-lens cameras (Model B011)

Thank you for purchasing the Tamron lens as the latest addition to your photographic

equipment. Before using your new lens, please read the contents of this Owner’s Manual

thoroughly to familiarize yourself with your lens and the proper photographing

techniques for creating the highest quality images possible. With proper handling and

care, your Tamron lens will give you many years of photographing beautiful and exciting

pictures.

NOMENCLATURE (Refer to Fig. 1, if not specified)

1. Lens hood

2. Hood attaching alignment mark

3. Hood attaching indicator

4. Filter ring

5. Hood attaching bayonet ring

6. Zooming ring

7. Focal length scale

8. Zoom index mark

9. Zoom lock switch (Figs. 3 & 4)

10. Focusing ring

11. Lens attachment mark

12. Lens mount/Lens mount contacts

SPECIFICATIONS

B011

Focal Length 18-200mm

Maximum Aperture F/3.5-6.3

Angle of View 75º 58’ - 8º 03’

Lens Construction 13/17

Minimum Focus Distance 0.5 m (19.7")

Maximum Magnification Ratio 1:3.7 (at 200mm)

Filter Size 62mm

Length/Overall Length* 96.7mm (3.8”) / 102.0mm (4.0”)

Diameter 68mm (2.7")

Weight 460 g (16.2oz)

Lens Hood HB011

* Length: From the lens front extremity to the mount surface.

Overall length: From the lens front extremity to the rear projection extremity.

Features and appearance of lenses listed in this owner's manual are subject to change

without notice.

ATTACHING AND REMOVING THE LENS

•How to mount the lens

Removing the rear cap of the lens, align the lens attachment mark (11) on the lens

barrel with its counterpart on the camera mount and insert the lens. Rotate the lens

clockwise until it click-locks. For Nikon models, align the lens attachment mark with

the dot on the camera and rotate the lens counter-clockwise until it click-locks.

•How to detach the lens

Pressing the lens release button on the camera down, turn the lens counter-clockwise

(clockwise in case on Nikon), and lift the lens off the camera’s lens mount.

* For further details, please read the instruction manual of your camera.

FOCUSING (Autofocus) (Ref. Figs. 1 & 2)

Set the focus mode on the camera to Auto focus (AF).

Press the shutter button halfway down while viewing through the camera's LCD. The lens

focuses automatically. An in-focus mark will light on the LCD when lens focuses on the

main subject sharply. Press the shutter button further to photograph.

* For further details, please read the instruction manual of your camera.

FOCUSING (Manual Focus) (Ref. Fig. 1 & 2)

Set the focus mode on the camera to Manual focus (MF).

Focus manually rotating the focusing ring (10) while viewing through the camera's LCD

(Fig. 2). The main subject in the viewfinder will be sharp when the lens is focused

correctly.

* For further details, please read the instruction manual of your camera.

VC MECHANISM (Ref. Fig. 1)

VC (Vibration Compensation) is a mechanism which reduces the image blur caused by

hand-held shooting. When using the VC, pictures can be taken at shutter speeds up to a

maximum of 4 stops slower than the speed when the VC is not used.

*Based on the company’s standard measurement. Also, the correction of image blur

differs depending on the conditions during picture taking and the person using the

camera.

* How to use VC mechanism

1. Enable image blur correction with the camera settings.

*Disable the setting when VC is not used.

2. Press the shutter button halfway to verify the effect of the VC. When the shutter button

is pressed down halfway, it takes about 1 second for the VC to provide a stable image.

* The VC can be effective for hand-held shots under the following conditions:

-Dimly lit locations

-Scenes where flash photography is forbidden

-Situations where footing is uncertain

-Taking panning shots of a moving subject

* The VC may not be able to give full effect in the following cases:

-When a photograph is taken from a fast moving vehicle

-Shooting during the excessive movement of the camera

-Turn the VC switch OFF when taking pictures with the bulb setting or during long

exposures. If the VC switch is ON, the VC mechanism may introduce errors.

•With the VC mechanism, there are occasions that the image in the viewfinder

blurs right after the shutter button is pressed down halfway, but this is not a

malfunction.

•When the VC switch is turned ON, the number of images recordable is reduced

due to the power used from the camera.

•When the VC switch is turned ON, immediately after the shutter button is pushed

halfway down and approximately 2 seconds after the shutter button has been

released, the camera will “click”. This sound is the VC’s locking mechanism

activating, it is not a malfunction.

•Turn the VC switch OFF when using a tripod.

•After releasing the shutter button, the VC will continue to operate for about 2

seconds until the locking mechanism activates.

•When the lens is removed from the camera while VC is activating, the lens may

make clicking sound when the lens is subjected to jolt. This is not a malfunction.

Re-attach the lens to the camera and turn the power ON. The sound should stop.

•The VC activates while the “release” button is pushed halfway down. (It is

activated 2 seconds after the shutter button is released.)

•VC can be used in AF or MF mode.

•For further details, please read the instruction manual of your camera.

ZOOMING (Ref. Fig. 1 & 2)

•Rotate the zooming ring (6) of the lens while viewing through the camera’s LCD

and compose your image at the chosen focal length.

ZOOM LOCK SWITCH (Ref. Fig 1, 3 & 4)

Zoom lock switch mechanism prevents lens barrels from extending toward long focal

length by their own weight while hanging from shoulders. Activate the switch at 18mm

setting to stop the lens barrels from rotating and extending.

How to activate the zoom lock switch mechanism

1. Locking: Set the lens to the 18mm position. Lift the zoom lock switch (9) toward

the lens. The lens barrel is now locked in position and does not rotate or extend by

its own weight.

2. Releasing: Pull the zoom lock switch (9) toward the camera. The lens barrel is

now free to rotate and extend for zooming.

•The zoom lock switch (9) cannot be lifted unless the zoom index mark (8) is set to

18mm. Do not force the lock switch or try to rotate the zooming ring (6) while

locked.

•The zoom lock mechanism is made to prevent the lens barrel from extending while

carried around on the shoulder. The lens may change its focal length during a

long exposure if the lens is used in a low or high angle position.

•The lens can be used at 18mm setting for picture taking even when locked by the

switch.

LENS HOOD (Ref. Figs. 1, 5 & 7)

A bayonet-type lens hood is provided as standard equipment. We recommend shooting

with the hood attached whenever possible as the lens hood eliminates stray light, which is

harmful to the picture.

Attaching the Lens Hood (Ref. Fig 5 & 6)

Align Hood attaching alignment mark (2) on the hood with the corresponding index mark

(5) or the top of the index line of the distance scale of the lens. Press the hood lightly onto

the hood attaching bayonet ring (Fig. 5) and then rotate it clockwise to secure. The lens

hood will be secure when the mark “TAMRON O” is at the top (Fig. 6). When attaching

the lens hood, hold the focus and zoom control rings, so they are not rotated

unintentionally.

•Pay particular attention to align the hood attaching indexes when using zoom

lenses including wide-angle settings. Improper attachment of a hood on a wide-

angle zoom lens may cause large shadowed areas in your pictures.

Stowing lens hood on the lens (Ref. Fig 7)

Reverse the lens hood. Point the lens toward the opening, and then align the hood

attaching index on the lens with the “TAMRON O” alignment on the hood. (3)

Turn the hood clockwise until the alignment mark is at the top to set it. (Fig. 7)

PRECAUTIONS IN SHOOTING

-The optical design for Di-III takes into consideration the various features of digital

single reflex cameras. However, due to the configuration of the digital single reflex

cameras, even when autofocus accuracy is within specifications, the focal point may be a

little forward or behind the optimum point when shooting with autofocus under some

conditions.

-The Tamron lenses described here employ an internal focusing (IF) system. Because of

the characteristics of this optical design, the angles of view at distances other than infinity

are wider than that of the lenses applying an ordinary focusing system.

-When using the flash supplied with the camera, adverse photographic phenomena such

as corner illumination fall-off or vignetting at the bottom part of the image may be

observed, especially in wide angle ranges. This is due to the inherent limitation of the

supplied flash, and/or the relative position of the flash to the edge of the lens barrel which

causes shadows on the image. We also recommend removing the hood when using the

supplied flash.

-When set on AF mode, interfering with the focusing ring may cause serious damage to

the lens mechanism.

-When using a special filter such as a PL filter, use low profile filters. The thick rim of a

normal filter may cause vignetting.

TO ENSURE LONG-TERM SATISFACTION

-Avoid touching the glass element surface. Use a photographic lens cloth or blower to

remove dust from the lens element surface. When not using the lens, always place a lens

cap on it for protection.

-Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove

fingerprints or dirt on the glass lens surface with a rotary motion from the center to the

edge.

- Use a silicon cloth to clean your lens barrel only.

-Mildew is an enemy of your lens. Clean the lens after shooting near water or in any

humid place. Store your lens in a clean, cool, dry place. When storing the lens in a lens

case, store it with commercially available drying agents such as silicagel, and change the

agent occasionally. If you find mildew on your lens, consult an authorized repair shop or

nearby photographic store.

-Do not touch the lens-camera interface contacts since dust, dirt and/or stains may cause a

contact failure between the lens and camera.

-When using your equipment [camera(s) and lens(es)] in an environment where the

temperature changes from one extreme to the other, make sure to put your equipment

temporarily in a case or plastic bag for a length of time in order for the equipment to go

through a gradual temperature shift. This will reduce potential equipment trouble.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tamron Kameraobjektiv Handbücher

Tamron

Tamron A17 Bedienungsanleitung

Tamron

Tamron SP150-600mm F/5-6.3 Di VC USD Bedienungsanleitung

Tamron

Tamron sp 300mm f/2.8 LD 107B Bedienungsanleitung

Tamron

Tamron A18 Bedienungsanleitung

Tamron

Tamron A09 Bedienungsanleitung

Tamron

Tamron SP85mm F/1.8 Di VC USD Bedienungsanleitung

Tamron

Tamron A014 Bedienungsanleitung

Tamron

Tamron A05 Bedienungsanleitung

Tamron

Tamron 360EE Bedienungsanleitung

Tamron

Tamron A17 Bedienungsanleitung

Tamron

Tamron B061 Bedienungsanleitung

Tamron

Tamron F004 Bedienungsanleitung

Tamron

Tamron 672D Bedienungsanleitung

Tamron

Tamron A007 Bedienungsanleitung

Tamron

Tamron A058 Bedienungsanleitung

Tamron

Tamron B011 Bedienungsanleitung

Tamron

Tamron A17 Bedienungsanleitung

Tamron

Tamron A13 Bedienungsanleitung

Tamron

Tamron A067 Bedienungsanleitung

Tamron

Tamron F050 Bedienungsanleitung

Tamron

Tamron A10 Bedienungsanleitung

Tamron

Tamron A037 Bedienungsanleitung

Tamron

Tamron SP 15-30mm F/2.8 Bedienungsanleitung

Tamron

Tamron 176A Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung

FujiFilm

FujiFilm XF56mm F1.2 R APD Bedienungsanleitung