Tannoy CMS50 Bedienungsanleitung

CMS50 & CMS50T ICT

USER MANUAL

HOLE CUT-

OUT SIZE 210mm

21210mm

CONTENTS

1. Introduction..........................................................................................................4

2. Unpacking............................................................................................................4

3. Assembly Instructions..........................................................................................6

3.1. Cut-Out..........................................................................................................6

3.2. Connections...................................................................................................6

3.3. Installation .....................................................................................................8

3.4. Speaker assembly with C-ring .....................................................................10

3.5. Speaker assembly with C-Ring and Tile-bridge ...........................................11

3.6. Speaker assembly with Plaster Ring............................................................12

4. Polarity Checking...............................................................................................13

5. Amplification & Power Selection.........................................................................13

6. Voltage & Power Selection (CMS50T ICT)........................................................13

7. Equalisation .......................................................................................................15

8. Dimensions........................................................................................................15

9. Performance Data..............................................................................................16

10. Technical Specifications...................................................................................17

11. CMS50 ICT Recommended Service Parts & Accessories................................18

12. Warranty..........................................................................................................18

13. Declaration of Conformity.................................................................................19

1. Introduction

Thank You for purchasing Tannoy CMS50 ICT Ceiling Monitor System.

The Tannoy CMS50 ICT Ceiling Monitor System is suited for high level music and

speech reinforcement applications requiring exceptional sonic quality with

uncompromised reliability. Achieving fast, simple and cost effective installation in new

and existing buildings, this versatile design has addressed the two most common

failures of background music and sound reinforcement systems, which are firstly the

tweeter, and secondly the crossover. With the revolutionary design of the ICT™ drive

unit, neither of the above criteria applies, assuring you years of trouble free use.

ICT™ or Inductive Coupling Technology utilises a wireless electromagnetic tweeter

that does not require a crossover and cannot be burned out from heavy or abusive

use. The 1” aluminium high frequency dome has a deep drawn skirt which sits on the

inside of the low frequency voice coil in the same magnetic gap. The skirt is like a

single shorted turn, which is induced with high frequency information generated by the

low frequency voice coil, which is fed a full bandwidth signal. The ICT™ dome is at the

heart of our 5” ceiling transducer which utilises a moulded plastic cone and nitryl

rubber surround to further enhance it’s durability and long term reliability.

The ICT driver is housed in a rugged aluminium ceiling enclosure that has been

optimally tuned to achieve maximum bass response and tonal balance.

The CMS50T ICT houses a Tannoy THP 30 multi-tap transformer for distributed-line

operation. The transformer provides high system sensitivity, a wide bandwidth and

dynamic range, with very low insertion loss. For critical Applications provision has

been made for the CMS50T ICT to accept the THP 60, a 60W multi-tap transformer.

2. Unpacking

Every Tannoy CMS50 ICT and accessory is carefully inspected before packing. After

unpacking, please inspect your CMS50 ICT to make sure no damage has occurred in

transit. In the unlikely event of any damage, would you please notify your dealer

immediately and retain your shipping carton, as your dealer may ask you to return the

faulty unit to him for inspection.

The CMS50 ICT is packed in pairs, and any additional optional extras will be provided

in separate packaging. These options include: C Ring, Tile Bridge and Plaster Ring.

2.1. CMS50 ICT Product

2.2. C Ring (optional)

2.3. Tile Bridge and C Ring (optional)

2.4. Plaster Ring (optional)

3. Assembly Instructions

3.1. Cut-Out

The cut-out size required is 210mm.

3.2. Connections

The CMS50 ICT is provided with a pluggable European type connector, which is

located on the back of the speaker can, under the wiring cover as shown in Figure 3a

below. This consists of a plug and socket. The plug can be removed from the socket

(Figure 3b) for wiring.

Figure 3a Figure 3b

To cable is inserted into the hole on the side of the plug, and the screw is tightened to

secure the cable in the plug. The plug is wired to the amplifier such that the

connections are as follows:

Pin 1 is Positive -connect to Red

Pin 2 is Negative -connect to Black

For additional speakers, pin 3 and 4 are in parallel with pins 1 and 2, where:

Pin 3 is Positive

Pin 4 is Negative

Before connecting the speaker, ensure the wiring cover and cable clamp on the back

of the can are open as shown in Figure 3c. Connect the wired plug into the socket.

Figure 3c

Once the plug has been connected, close the wiring cover as shown in Figure 3d,

below:

Figure 3d

Place the wires in the recess in the cable clamp. Close the cable clamp as shown in

Figure 3e and tighten the screw holding the clamp in order to secure the cables in

place.

Figure 3e

3.3. Installation

The CMS50 ICT is supplied as a complete product, ready for installation. An optional

C Ring, Tile Bridge and Plaster Ring are available if required. The CMS50 ICT has

been designed for ease of installation.

To install the speaker, connect the speaker as described in the section 3.2. The

speaker has 3 tags (Figure 3f) which hold the speaker in place. Ensure these tags are

flat against the can before installing into the ceiling.

Figure 3f

Slide the speaker through the 210mm hole, as shown in figure 3i, and tighten the

outer screws on the front baffle. Tighten these screws until a secure grip is

established as shown in Figure 3g.

Figure 3i

Tags for fastening speaker

Screws for tightening tags

Figure 3g

3.4. Speaker assembly with C-ring

To spread the weight of the 3 dog tags, an optional C-ring is available for the CMS50

ICT. To install the speaker in the ceiling, place the C-ring behind the tile. Slide the

speaker assembly through the hole (Figure 3h) and tighten the dog tag screws, until a

firm grip is achieved, (Figure 3i).

Figure 3h

Figure 3i

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tannoy Sprecher Handbücher

Tannoy

Tannoy iw4DC Bedienungsanleitung

Tannoy

Tannoy Power Dual iQ 10 Bedienungsanleitung

Tannoy

Tannoy VXP SERIES Bedienungsanleitung

Tannoy

Tannoy TKT105 Bedienungsanleitung

Tannoy

Tannoy MERCURY V Bedienungsanleitung

Tannoy

Tannoy Precision P6D Bedienungsanleitung

Tannoy

Tannoy CVS 4 MICRO Bedienungsanleitung

Tannoy

Tannoy Definition DC10A Bedienungsanleitung

Tannoy

Tannoy DIMENSION TD10 Bedienungsanleitung

Tannoy

Tannoy QCI A1-BL Bedienungsanleitung

Tannoy

Tannoy KINGDOM ROYAL Bedienungsanleitung

Tannoy

Tannoy POWER V12 Bedienungsanleitung

Tannoy

Tannoy AMS Series Bedienungsanleitung

Tannoy

Tannoy Definition Install iw60 EFX Bedienungsanleitung

Tannoy

Tannoy CMS PI Series Bedienungsanleitung

Tannoy

Tannoy POWER V15 Bedienungsanleitung

Tannoy

Tannoy Di5a Bedienungsanleitung

Tannoy

Tannoy Ellipse 10 Passive Bedienungsanleitung

Tannoy

Tannoy VQ 100 Bedienungsanleitung

Tannoy

Tannoy mercury 7 Bedienungsanleitung

Tannoy

Tannoy Definition Install DC6i Bedienungsanleitung

Tannoy

Tannoy CVS 8 Bedienungsanleitung

Tannoy

Tannoy REVOLUTION Bedienungsanleitung

Tannoy

Tannoy iW 62 BACKCAN Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung