Tannoy DUAL CONCENTRIC ic6 DC Bedienungsanleitung

DUAL CONCENTRIC™ CEILING SPEAKER

ic6 DC Owner’s Manual

WARRANTY

Thank you for purchasing the Tannoy ic6 DC Ceiling Speaker System.

This equipment has been produced and tested with care and precision. All Tannoy speaker systems are built to give first class

service and carry a 5-year warranty. Active subwoofers carry a 1-year warranty.

If the equipment proves to be defective within this period for any reason other than accident, misuse, unauthorized modification

or fair wear and tear, Tannoy will repair any such defect, or, at our option, replace it without charge for parts, labour or return

carriage. This warranty is given in addition to the customer’s statutory rights.

If you suspect a problem with your loudspeakers please contact your local Tannoy dealer who will be able to advise on appropriate

action.

UNPACKING

The ic6 DC is packed individually. Check the package includes grille, spare grille foam, paint mask template, C ring and mounting

template. In the unlikely event of shipping damage, notify your dealer immediately, and retain all packaging.

CONTENTS

WARRANTY 2

UNPACKING

AMPLIFIER MATCHING 3

INSTALLATION 3

TECHNICAL DRAWINGS 4

TECHNICAL SPECIFICATIONS 5

PRODUCT IMAGES 6

NOTES 7

OWNER’S MANUAL

ic6 DC

AMPLIFIER MATCHING

Consult the Technical Specification section for the acceptable range of amplifier powers. The high peak power handling of Tannoy

loudspeakers permits the responsible use with more powerful amplifiers.

As with all loudspeakers, power handling is a function of voice coil thermal capacity. Take care to avoid overdriving any amplifier,

as the resulting distortion, or ‘clipping’, can damage the loudspeaker if allowed to continue for an extended period. Generally a

higher power amplifier, running free of distortion is safer than a lower power amplifier being driven hard, and will also sound better.

INSTALLATION

If desired, the grille and baffle panel may be painted to match the surrounding décor. Several thin coats of paint will provide a

better finish than one overly thick coat.

• When painting the baffle, carefully mask off the driver assembly, ensuring that paint does not come into contact 

with the cone and roll surround.

• Paint the grille, leaving the acoustically transparent foam in place on the reverse side. Remove and discard original 

foam, replacing with the spare sheet supplied. It is important that this is bonded over it’s entire area, using a suitable 

spray adhesive, to avoid audible resonance.

Using the supplied template, cut the mounting aperture in the ceiling and place the C ring in position, to spread the weight of the

clamps on the ceiling. Beware of hidden obstructions and electrical wiring. Always use a good quality speaker cable, and allow

enough spare for the loudspeaker to be installed or removed easily. Connect to the two spring terminals, being careful to observe

polarity, positive to positive and negative to negative.

Position the loudspeaker in the aperture and tighten the 3 screws which engage the clamping mechanism (Figure 1). WARNING:

do not over tighten.

If the speaker has to be removed, loosen the 3 screws, ensuring the clamps are fully retracted.

Figure 1: Fitment in Ceiling

GRILLE FITTING AND REMOVAL

Before fitting the grille, the HF level control on the baffle should be set to the desired position, according to the acoustics of the

environment.

The grille is a tight fit, and should be located by applying even pressure around the circumference. To avoid indentation, do not

press the centre of the grille.

If the grille has to be removed, use a firm piece of wire, such as an opened up paper clip, inserted through the mesh. Work around

the outside of the grille, to gently prise it off.

TECHNICAL DRAWINGS

ic6 DC

104mm

41/8”

270mm

105/8”

TECHNICAL SPECIFICATIONS

PERFORMANCE

Recommended amplifier power - Watts RMS 20-150

Continuous power handling - Watts RMS 110

Peak power handling - Watts (1) 325

Sensitivity (2.83 Volts @ 1m) (2) 91dB

Nominal impedance - Ohms 8

Low frequency alignment (-6dB) 36Hz

Frequency response (-6dB) 36Hz- 36kHz

DRIVE UNITS

Dual ConcentricTM high frequency 25mm (1”) 25 - micron titanium dome, neodymium magnet system

Dual ConcentricTM low frequency 165mm (61/2“) Multifibre paper pulp cone

Magnetically shielded No

CROSSOVER

Crossover frequency 1.8kHz

Crossover type 1st order low pass, 1st order high pass

HF adjustments +/- 1.5dB

PHYSICAL

Materials Baffle panel: moulded ABS

Clamps: moulded polypropylene

Dimensions- including grille mm (inches) 270 (105/8) diameter, 104 (41/8) depth

Weight kgs (lbs) 3.0 (6.6)

Finish options White

(1)  Long-term power handling capacity as defined in EIA standard RS426A.

(2)  Averaged over specified bandwidth for half-space environment. For anechoic conditions, reduce by 3dB.

Product Images

ic6 DC

Notes

1.2a

0.6a

0.8a

1.5a 1.22a

Tannoy United Kingdom T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: [email protected]

Tannoy North America T: (519) 745 1158  F: (519) 745 2364  E: [email protected]

6481 0450

Inhaltsverzeichnis

Andere Tannoy Sprecher Handbücher

Tannoy

Tannoy VXP SERIES Bedienungsanleitung

Tannoy

Tannoy Reveal 402 Bedienungsanleitung

Tannoy

Tannoy SuperTweeter ST-100 Bedienungsanleitung

Tannoy

Tannoy Reveal 501A Bedienungsanleitung

Tannoy

Tannoy QFLEX 16LS-WP Bedienungsanleitung

Tannoy

Tannoy CMS 801 PI 8 OHM BACKCAN Bedienungsanleitung

Tannoy

Tannoy CMS 601 DC BM Bedienungsanleitung

Tannoy

Tannoy REVOLUTION Bedienungsanleitung

Tannoy

Tannoy T12 Bedienungsanleitung

Tannoy

Tannoy CVS Series Bedienungsanleitung

Tannoy

Tannoy Qflex Bedienungsanleitung

Tannoy

Tannoy PCI 45DC Bedienungsanleitung

Tannoy

Tannoy Mercury IC Bedienungsanleitung

Tannoy

Tannoy OCV Series Bedienungsanleitung

Tannoy

Tannoy HTS Bedienungsanleitung

Tannoy

Tannoy CMS 3.0 series Bedienungsanleitung

Tannoy

Tannoy VLS SERIES Bedienungsanleitung

Tannoy

Tannoy CVS 8 Bedienungsanleitung

Tannoy

Tannoy VX 12.2Q Bedienungsanleitung

Tannoy

Tannoy I6 AW ICT Bedienungsanleitung

Tannoy

Tannoy V8 Bedienungsanleitung

Tannoy

Tannoy SENSYS DCC Bedienungsanleitung

Tannoy

Tannoy ARENA Highline TS300 Bedienungsanleitung

Tannoy

Tannoy VLS SERIES Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung