TAO TT-BS017 Bedienungsanleitung
01
Contents --------------------------------------------------------------------------------------------------------------------------1
Production Introduction -----------------------------------------------------------------------------------------2
About TT-BS017 Wireless Barcode Scanner----------------------------------------------------2
Package Includes ------------------------------------------------------------------------------------------------------2
Product Diagram --------------------------------------------------------------------------------------------------------2
Technical Specifications ------------------------------------------------------------------------------------------3
How to Use -----------------------------------------------------------------------------------------------------------------3~4
Charging the Scanner ----------------------------------------------------------------------------------------------5
Scanner Setup ------------------------------------------------------------------------------------------------------------5
Single scanner to single receiver ------------------------------------------------------------------------- 5
Single scanner to multiple receivers --------------------------------------------------------------------6
Multiple scanners to single receiver ---------------------------------------------------------------------6
Set Scanner ID ----------------------------------------------------------------------------------------------------------6
Set Auto-off Time ----------------------------------------------------------------------------------------------------7~8
Add Prefix -------------------------------------------------------------------------------------------------------------------9
Add Suffix -----------------------------------------------------------------------------------------------------------------9~10
Hide the Starting Characters ---------------------------------------------------------------------------- 10~11
Hide the Last Characters ------------------------------------------------------------------------------------11~12
Other functions/modes ------------------------------------------------------------------------------------------- 12
Inventory Mode ------------------------------------------------------------------------------------------------------- 12
Data Transfer ----------------------------------------------------------------------------------------------------------- 14
Back to Normal Mode -------------------------------------------------------------------------------------------- 15
Reset Your Scanner------------------------------------------------------------------------------------------------ 15
Deep Sleep Mode --------------------------------------------------------------------------------------------------- 16
Technical Assistance --------------------------------------------------------------------------------------------- 16
Warranty ------------------------------------------------------------------------------------------------------------------------- 16
Statement --------------------------------------------------------------------------------------------------------------------- 16
Appendix – Barcodes ------------------------------------------------------------------------------------------16~25
02/03
• With long range wireless connection (up to 500m in open space), you can work within
a large area without limitation of cables or even computers.
• Large internal storage can save up to 32,000 barcodes in inventory mode
• Designed for team work with supports for multiple scanner with a single receiver, multiple
receiver to a single scanner and multiple scanner to multiple receiver connection
• Extra toughness with industrial-grade shock proof design that can withstand multiple
consecutive 3m free fall drop test.
• Support USB, PS2, RS232 data interfaces
• FCC, CE, ROHS Certification
4. Once the driver installed successfully, scan the “Match ADD” scanner WITHIN 5
seconds. Now the pairing is done
04/05
Charging the Scanner
Scanner Steup
3. Scan “Set Receiver’s ADD” Barcode WITHIN 5 seconds.
4. This will connect the 2nd receiver to the same scanner
5. Repeat step 2 to 3 for the remaining unpaired scanners.
Set Receiver’s Add
4
- You can connect maximum of 16 scanners with one receiver simultaneously.
Set Scanner ID
To avoid confusion when using multiple scanners, you can assign a unique ID
for each scanner. Scanner ID consists of up to 3 digits (0 – 9). The scanner ID
will appear as prefix before each scan result.
2.Set the scanner ID by scan a combination of up to 3 digits from the following
barcodes. You can set a single digit, two digits or 3 digits scanner ID. For example,
if you want to set the scanner with ID “68”, then please scan “6” and then “8”
successively.
Here’s the bar code list of the ID digit:
0
4
1
5
2
6
3
7
8
9
Set Scanner ID
06/07
3. Once you have scanned the scanner ID, please scanner the “Show Scanner
ID” barcode to enable the scanner ID.
1. Scan “Set Device ID” bar code.
1. Scan “Set Auto-off Time” bar code
Set Auto-off Time
Set Auto-off Time
2. Scan the time barcode from the following list
08/09
3.Now the scanner will be automatically powered off in the time you set.
4. Now your scanner will automatically adds the scanner ID as prefix to all scan
results. To disable the scanner ID, you can scan the “Hide Scanner ID” barcode
2 seconds (default) 10 seconds
20 seconds 30 seconds
60 seconds 2 minutes
5 minutes 10 minutes
20 minutes Never
Show Scanner ID
Hide Scanner ID
10/11
1.Scan “Hide Starting Characters” setting code
Hide the Starting Characters
“Hide Starting Characters”
setting code
Inventory Mode Setting Steps
To use the scanner in inventory mode you must first pair the scanner with at least one
receiver. To do that, please follow the previous instructions on pairing a single scanner
with a single receiver.
Once the scanner is successfully paired with a receiver, there are 2 ways to get into
inventory mode. You can use either method.
12/13
• Method 2
Press and hold the trigger until you see the red LED start flashing, then release the trigger.
The LED light will turn into solid blue, which means the scanner is in inventory mode.
Once the scanner is in inventory mode, all scanned barcode will be saved to scanner’s
internal memory.
• Method 1 (recommended)
Simply scan the “Inventory Mode” bar code to enter into inventory mode. The LED will
turn to solid BLUE.
Notes:
• In normal mode, if three consecutive data uploading failure occur, the scanner will
switch into Inventory Mode automatically.
• In inventory mode, for each successful scan, the scanner will make 2 “Di” sound
(only 1 in normal mode)
• When using the 2nd method to get into inventory mode, it is possible to accidentally
set the scanner to enter deep sleep mode if you keep holding the trigger for too long.
(Please see Page 14 to check Deep sleep mode)
It is important to set frequency channel for each receiver to avoid signal interference. We
recommend set frequency channel for each scanner if you have more than 2 receivers
working in inventory mode in the same area.
1.To set the frequency channel for the first receiver, take the scanner that is paired to the
receiver and scan “Set Frequency channel” bar code.
2. Scan one of the channel listed
Set Frequency Channel
Channel 01 Channel 02 Channel 03
Channel 04 Channel 05 Channel 06
Channel 07 Channel 08 Channel 09
Channel 10 Channel 11 Channel 12
Channel 13 Channel 14 Channel 15
Channel 16 Channel 17 Channel 18
Channel 19 Channel 20 Channel 21
Channel 22 Channel 23 Channel 24
Set Frequency Channel in Inventory Mode
3. The receiver is now set to the frequency channel you have scanned
4. If you have more than 1 scanner paired to this receiver, please use each
scanner (exclude the one you have just used) to scan the match ADD barcode
5. Repeat step 1 – 4 for every receiver in use in the same area
Once you have finished scanning, you can upload saved data to a computer
3.If you wish to scan all barcodes saved in the scanner, please scan the “upload all data”
barcode
4. If you wish to clear all saved barcode, you can scan the “Clear all data” barcode
5.You can scan the data count barcode to know how many barcode is saved in the scanner
In order to get back to normal mode from inventory mode, there are 2 methods as well.
Please choose either one of the following 2 methods:
• Simply scan the “Inventory Mode” bar code. The LED will turn to solid red.
• Press and hold the trigger for 8 seconds without letting go until the LED light turns into
red, which means the scanner is already in normal mode.
“Inventory mode” bar code
Match Add
“Upload all data” barcode
Clear all data
Data Count
14/15
Channel 25 Channel 26 Channel 27
Channel 28 Channel 29
Channel 31 Channel 32
Channel 30
Deep Sleep Mode
• Press and hold the trigger for 11 seconds or more will cause the scanner to enter deep
sleep mode. During deep sleep mode, scanner will not respond to single trigger press
• To exit deep sleep mode, press and hold the trigger for 3 seconds to wake up the
scanner
16/17
Reset
Appendix – Barcodes
Inhaltsverzeichnis
Andere TAO Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
