10 11
Please note: For a VdS-compliant installation,
the Tapkey Smart Lock must be protected
with a burglar-resistant doorplate with Class
B or C. Such doorplates correspond with
DIN 18257 Class ES2-ZA or ES3-ZA.
Caution: The product should not be altered
in any way except in agreement with the
changes described in these instructions.
Caution: For an installation compliant with
DIN EN15684, other required components
may have to be adjusted in order to ensure
compliance with this European standard.
Caution: The selection of the right size (exter-
nal/internal installation length) is of decisive
importance for the Tapkey Smart Lock. Ask
your specialist retailer/dealer/electronics
partner how you can properly determine the
installation length of the cylinder.
Caution: The instructions should be followed
exactly during installation. The person who
carries out the installation should share the-
se instructions and any instructions related
to maintenance with the user.
Caution: Before a Tapkey Smart Lock (and
variants) is installed in a re-/smoke-
resistant door the re certication should
be inspected to ensure compliance.
Caution: In the event of electrostatic dischar-
ge (sparks or breakdown), electronic com-
ponents may be destroyed. For this reason,
avoid electrostatic charges prior to the (dis)
assembly of the knob sleeve or touch a
conductive, grounded object (e.g. water pipe
or heating) beforehand to remove electrost-
atic charge from your body. Never touch the
electronics components with your ngers.
Caution: Always keep the authorised locking
media in a safe place that is only accessible
to authorised persons.
Caution: If you lose a locking medium, you
must delete/lock it immediately.
Caution: The Tapkey Smart Lock may not be
oiled or greased. Do not use any acids at or
in the device. Make sure no humidity can get
into the device.
Caution: Always store the Tapkey Smart Lock
a suitable distance (>10 cm) away from the
Owner Card in order to prevent accidental
discharge.
Watch your ngers when installing the electronic
knobs and mechanical knobs on the Tapkey Smart
Lock as well as during installation of the cylinder
itself. Your ngers can become crushed if there is not
enough space between the device parts or e.g. the
door frame. When using tools, make sure you use
them properly. Improper use can lead to injuries to
limbs or other body parts such as the eyes.
INSTALLATION
Proceed according to the installation sequence
described and observe the notes and gures.
Caution: For safety-relevant doors, the cylin-
der may not protrude by more than 3 mm.
