tapplock One+ Bedienungsanleitung
Tapplock one+
User Manual
World’s first smart fingerprint padlock
Tapplock.com
Cutting-edge fingerprint
technology
•Unlocks in 0.8 seconds
•Stores up to 500 fingerprint
•Adaptive algorithm: faster and
more accurate access each
time you use it
Water and weather resistant
•Water resistant up to IP67
•Rust-proof & rain-proof
•Fully functional between -10C
and 60C
Shareable wireless access
•Supports wireless Bluetooth
access via the Tapplock app
•Share & control access
remotely to unlimited users
•View access history with time
and location
Rechargeable battery
•Up to one year battery life per
2 hour charge time
•Check remaining power using
the Tapplock app
Unbreakable durability
•Zamak 3 zinc alloy metal body
with cut-resistant stainless steel
shackle
•Double-layered design with
anti-shim and anti-pry
capabilities makes Tapplock
virtually unbreakable
Morse code backup access
•Setup Morse code access
using the power button in case
a user's fingerprint isn't enrolled
and the phone ran out of
batteries
Overview
Fingerprint sensor
Power / mode button
Status indicator
Charge port
Quick start
1. Download the
Tapplock app
from Google Play
Store or iOS App
Store
1. Register / log in
on the Tapplock
app and follow
instructions to
setup your new
Tapplock
** Make sure Bluetooth is turned on in your phone
settings before beginning to setup the lock
3 ways to unlock
Tapplock one+is equipped with
multiple access capability to allow for
maximum convenience and flexibility.
Fingerprint access: 0.8
seconds
Bluetooth access: Bluetooth
access via the Tapplock app
using your smartphone
Morse-code access: backup
access using long-short
combinations
Status Indicator
The status indicator is the
visual cue to understanding
your Tapplock one. Refer to
table below to understand
what each color means.
Status Indicator
Mode Function/Action White Blue Green Red
Beep Sound
Fingerprint Mode
Press power button x 1
Fingerprint accepted
Fingerprint rejected
Bluetooth Mode
Press power button x 2
Searching
Connected
Unlock via
Bluetooth
Morse Code
Mode
Press power button x 3
Long press
Short press
Correct Morse code
Incorrect Morse code
Lock Successful
Locking successful
Lock Notification
Lock is unlocked
Charging Mode
Charging
Breathing
Fully charged
Low Battery
Notification
Battery at 30%
Batter at 20%
Battery at 10%
Fingerprint
Mode
•To turn on Tapplock, press the Power Button
located below the rim. The Status Indicator light
should be white, and your Tapplock should be
ready to unlock with your fingerprint.
(If you are having trouble getting to Fingerprint
Mode, hold down the Power Button until the
Status Indicator light turns off, putting your lock
in sleep mode. Then press the Power Button to
enter Fingerprint Mode)
** Tapplock one+will automatically enter sleep
mode after 10 seconds of inactivity. This
increases the lifespan of your battery.
Status Indicator
Power Button
Andere Handbücher für One+
1
Inhaltsverzeichnis
Andere tapplock Sperren Handbücher
