Target TGT-CU8-002 Bedienungsanleitung

assembly instructions

8-Cube

organizer storage

style # TGT - CU8 - 002.

dpci # 002 - 11 - 0589 (WHITE)

style # TGT - CU8 - 001.

dpci # 002 - 11 - 0616 (ESPRESSO)

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in

no time. Good luck—though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-698-4846(Target 855 - MYTGTHOME) to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.

3. Gather all tools prior to assembly.

4. Assembly of this furniture is easier with two people.

5. Do not use power screwdrivers. Using any power tools to assemble this furniture may potentially strip the wood and hardware.

6. Do not over tighten screws.

tools needed

Hammer Screwdriver

(H4) x 18

assembly screw

#DIRECTRA NO.5 x 38

(H3) x 18

screw cover

(H1) x 6

long dowel 6 x 60 mm.

(H2) x 12

short dowel 6 x 30 mm.

(H5) x 48

nail

(H7) x 1

L-bracket screw

#7 x1/2" F / N

(H8) x 1 wall screw

#6 x1.1/2" P / N

(H6) x 1

L-bracket

hardware

Exploded diagram

ITEM

ฺB

DESCRIPTION

back panel

vertical divider

horizontal divider

top/bottom panel

side panel

DESCRIPTION

DDD

Optional Assembly

safety precautions

warning

This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or

serious injury could occur.

Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse.

Serious bodily injury and/or damage to personal belongings may occur.

Do not overload unit. If any shelf, top, or bottom of unit bows or bends greater than 1/2 in., it is overloaded. The shelf, top, or bottom could

collapse and cause serious bodily injury and/or damage to personal belongings.

Do not climb or step on the unit. This is not a bench. The unit may become unstable and either tip or collapse. Serious bodily injury and/or

damage to personal belongings may occur.

Do not use this unit as a television stand. Serious bodily injury and/or damage to personal belongings may occur.

Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip. Serious bodily

injury and/or damage to personal belongings may occur.

Do not stack units in a vertical format. Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or

damage to personal belongings.

Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings,

and/or damage to the wall may occur.

All units must be secured individually to wall stud using L-Bracket and Wall Screw (#10 x 1-1/2 in.) provided. If wall stud is not accessible,

consult your local hardware store for appropriate mounting hardware. Failure to do so may create an unsafe tipping hazard that could lead to

serious bodily injury and/or damage to personal belongings.

We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.

helpful hints

We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.

Unfinished edges are shaded in gray. It is important to understand how finished edges go together. Take a moment to lay out all

the wood pieces and note the finished and unfinished (raw wood) edges. Arrange pieces so all finished edges are facing the

same way. While assembling, take care to note in each diagram which way finished edges are facing. In general, all finished edges

will face forward and all finished sides (large area of piece) will face up when product is fully assembled and upright.

hand tighten screws

We recommend you hand-tighten screws. Use care not to overtighten if using power tools.

finished edge unfinished edge

installing L-bracket

There are several "key points" to

L-bracket installation. Please review the

drawings and comments at right as well

as the assembly steps provided.

All units must be fastened to the wall.

Always mount L-bracket to a wall-stud.

The L-bracket is intended to be installed

on the top side of the top panel.

However, if you prefer more "hidden"

hardware or are stacking, you can cut

the back panel (in center at top) and

install the L-bracket under the top panel.

Install short end against wall/wall

stud; long end against unit.

Do not install this unit flush against the wall!

This unit requires a gap of between 1/2 inch and

1 inch to install properly.

For more hidden hardware, cut back panel before

installing and secure L-bracket under top panel.

See steps 4 and 5 for detailed installation instructions.

Manufactured by: S. Kijchai Company Ltd.

Address: M. 7 , Rayong, Thailand

Manufacture Date : 09/2019

Wall

stud.

Min

1/2 in.

Max

1 in.

Wall

stud.

Short

end

long end

Wall

stud.

Top Panel

Children have died from

furniture tipover.To reduce the

risk of furniture tipover:

ALWAYS install tipover restraint

provided.

NEVER put aTV on this product.

NEVER allow children to stand, climb

or hang on drawer, doors, or shelves.

NEVER open more than one drawer

at a time.

DO NOT defeat or remove the drawer

interlock system.

Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Step 1. Insert dowel into vertical dividers. (D)

(H1) x 6

long dowel 6 x 60 mm.

(H2) x 6

short dowel 6 x 30 mm.

(H4) x 3

assembly screw

#DIRECTRA NO.5 x 38

DH1

1. Insert six long dowels (H1) and short dowel (H2) into vertical dividers. (D)

2. Place three vertical dividers (D) onto top/bottom shelf (B) facing short dowel (H2) side.

3. Secure each vertical divider with a screw (H4). Make sure finished edges are facing up.

long dowel 6 x 60 mm.

shot dowel 6 x 30 mm.

long dowel 6 x 60 mm.

shot dowel 6 x 30 mm.

step 2. Place horizontal divider (C) over vertical dividers(D)

1. Place horizontal divider (C) over vertical dividers(D). The long dowel should go through all the holes on horizontal dividers (C)

long dowel 6 x 60 mm.

step 3. Insert dowel into vertical dividers. (D)

(H2) x 6

short dowel 6 x 30 mm.

1. Insert six shot dowels (H2) into vertical dividers. (D)

2. Place three vertical dividers (D) onto horizontal divider (C)

shot dowel 6 x 30 mm.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Target Inneneinrichtung Handbücher

Target

Target carson CACNTBWDEB Bedienungsanleitung

Target

Target 6-Cube Bedienungsanleitung

Target

Target Howell FTS61267 Bedienungsanleitung

Target

Target HAVERHILL 58 MEDIA STAND 4 DOORS Bedienungsanleitung

Target

Target Berkshire FWS80605A Bedienungsanleitung

Target

Target Halsted FRS80921A Bedienungsanleitung

Target

Target paulo Bedienungsanleitung

Target

Target 9-Cube Bedienungsanleitung

Target

Target Halsted FWS80476 Bedienungsanleitung

Target

Target BALI LOUNGER WITH CUSHION Bedienungsanleitung

Target

Target Windham Bedienungsanleitung

Target

Target Bullseye Design 249-02-4519 Bedienungsanleitung

Target

Target MYKONOS BENCH Bedienungsanleitung

Target

Target Fairglen TGFGMEDIWH Bedienungsanleitung

Target

Target AKIRA Bedienungsanleitung

Target

Target 249-14-0039 Bedienungsanleitung

Target

Target BK3SHLFXEB Bedienungsanleitung

Target

Target Halsted FRS80712GST3 Bedienungsanleitung

Target

Target Halsted FTS81068C Bedienungsanleitung

Target

Target TGNWBD1DBK Bedienungsanleitung

Target

Target Windham Bedienungsanleitung

Target

Target Windham Bedienungsanleitung

Target

Target fairfax TGCRSTKD01 Bedienungsanleitung

Target

Target 4273 Installationsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung