Targus ACA11EU Bedienungsanleitung

Ltd., Hounslow, Middlesex, TW4 5DZ, UK. All rights

reserved. Targus is either a registered trademark or

trademark of Targus Group International, Inc. in the

United States and/or other countries. Features and

specications are subject to change without notice. All

trademarks and registered trademarks are the property

of their respective owners.

N2953

USB 2.0

MULTI - MONITOR

ADAPTER

410-1938-003A / ACA11EU

User Guide

Targus USB 2.0 Multi - Monitor Adapter

GB - Introduction

Thank you for your purchase of the USB 2.0 Multi - Monitor Adapter.

Package Contents

In addition to this user guide, the package contains:

• USB 2.0 Multi - Monitor Adapter

• Driver software CD (mini CD)

• User Guide

• DVI to VGA adaptor

System Requirements

Hardware

• PC with an Intel® Pentium® processor or equivalent

• USB version 2.0 port

• CD-ROM drive (support mini CD)

Operating System

• Mircosoft Windows® XP with Service Pack 3

• Mircosoft Windows Vista® with Service Pack 1

• Mircosoft Windows® 7

Table of Contents

GB – English

USB 2.0 MULTI - MONITOR ADAPTER .................................................3

DE – Deutsch

USB 2.0 MULTI-MONITOR ADAPTER ....................................................23

ES – Español

ADAPTADOR USB 2.0 MULTI MONITOR ....................................................43

FR - Français

ADAPTATEUR USB 2.0 MULTI-ÉCRAN ...................................................63

IT - Italiano

ADATTATORE MONITOR USB 2.0 MULTI ....................................................83

NL - Nederlands

USB 2.0 MULTI - MONITOR ADAPTER ..................................................103

PT - Português

ADAPTADOR MULTI-MONITOR USB 2.0........................................................123

Targus USB 2.0 Multi - Monitor Adapter

Installing the Device and Drivers

To use the monitor adaptor, you must rst install the driver onto your

computer. Then, connect the monitor adaptor to your computer and

Windows plug-and-play will install the hardware drivers for each port.

WARNING: YOU MUST INSTALL THE ADAPTOR SOFTWARE BEFORE CONNECT-

ING IT TO YOUR COMPUTER. OTHERWISE, THE ADAPTOR WILL NOT WORK

PROPERLY.

Installing the Monitor Adaptor

Installing the adaptor driver enables your operating system to recognize the

adaptor once it’s connected.

1 Turn on your computer.

2 Insert the driver software CD into your computer’s CD-ROM drive.

If setup does not begin automatically, click Start, Run, and enter D:\

Setup.exe (where D: is the path of your CD-ROM drive) and then click OK.

3 Follow any on-screen instructions to complete the installation.

4 Click Finish and restart your computer when prompted.

Connecting the Monitor Adaptor to Your

Computer

After installing the Monitor Adaptor software, you are ready to connect

the Adaptor to your computer. Connect one end of the USB cable to the

adaptor and the other end into an available USB 2.0 port on your computer.

DO NOT CONNECT ANY DEVICES TO THE ADAPTOR UNTIL THE

INSTALLATION IS COMPLETED.

• A green light will be ON when

the adaptor is functioning

To avoid possible damage when connecting a new device, do not force the

cable connector into the port on the adaptor. If the cable connector does not

attach smoothly, turn the connector over and try attaching it again.

Multi - Monitor Adapter

Targus USB 2.0 Multi - Monitor Adapter

Connecting to a Monitor or LCD

Any monitor or LCD connected to the video port of the adaptor will be

limited to a maximum resolution of 2048 x 1152 at 32 bit color

NOTE: THE MAXIMUM RESOLUTION OF 2048 x 1152 IS ONLY SUPPORTED IF THE MONITOR OR LCD

IS PLUGGED INTO THE ADAPTOR BEFORE CONNECTING THE ADAPTOR TO THE NOTEBOOK. IF THE

MONITOR OR LCD IS PLUGGED INTO THE ADAPTOR AFTER THE ADAPTOR IS CONNECTED TO THE

NOTEBOOK, THE RESOLUTION IS SET TO 1024 X 768.

Controlling the Display using Adaptor’s

Video Menu Options

Video menu options can be accessed by right-clicking on the Adaptor icon

in the system tray or through the Windows Display Properties.

Windows XP / Windows Vista

Windows 7

DVI to VGA adapter

Targus USB 2.0 Multi - Monitor Adapter

Extend: You are using your notebook screen as your primary display and

your monitor or LCD is a secondary screen.

To set the display into this mode, select ‘Extend’ in the Adaptor Icon ap-

plication menu. The device will now be extending in the direction it was

the last time the display was in this mode. For more control, navigating

to the ‘Extend To’ submenu and selecting one of the options will not only

put the device into extend mode, but will also place it to the Left/Right/

Above/Below the main (primary) monitor.

Extend Mode

Mirror: You are using your notebook screen as your primary display and

your monitor or LCD replicates your notebook screen.

To set the display into this mode, simply select ‘mirror’ from the adaptor

icon application menu. The resolution, colour depth and refresh rate

of the primary screen are replicated on the monitor connected to the

adaptor graphics adapter.

NOTE: IF THE MONITOR CONNECTED TO THE ADAPTOR SUPPORTS A LOWER RESOLUTION THAN

THE PRIMARY PICTURE FITS ON THE EXTERNAL SCREEN. WHERE THE MONITOR CONNECTED TO

THE DOCKING STATION IS OF A LARGER SIZE THAN THE PRIMARY SCREEN THE IMAGE WILL BE

LETTER-BOXED TO KEEP THE ASPECT RATIO CORRECT.

Mirror

Targus USB 2.0 Multi - Monitor Adapter

Primary (Notebook Monitor Off): You are using your monitor or LCD as

your primary display and your notebook screen is turned off. To set the dis-

play into this mode, simply select ‘ notebook monitor off’ from the adapter

icon application monitor.

Primary

Off: You are using your notebook screen as your primary display and your

monitor or LCD is turned off.

Off

Targus USB 2.0 Multi - Monitor Adapter

Controlling the Display using Windows

Display Properties (for Windows XP and Vista)

Adaptor’s video setting can also be congured from the Windows Display

Properties dialog box. To do this on Windows Vista, right click on the desktop,

click on “Personalize” and then select the ‘Display Settings’ link. The corre-

sponding feature is available in Windows XP by right clicking on the desktop,

selecting ‘Properties’ and then navigating to the ‘Settings’ tab.

Figure 1

Windows Vista Windows XP

Extend Mode: To set the display into this mode, check the box marked

‘Extend my Windows desktop onto this monitor’ (1 in Figure 1). Arrange

screen resolution and colour quality using the appropriate controls (2 and

3), and arrange its position with respect to the other monitors on the ex-

tended desktop in using the drag area (4).

Mirror Mode: To set the display into mirror mode, simply uncheck the box

marked ‘Extend the desktop onto this monitor’ (1 in Figure 1 on previous

page.).

Setting the Primary Display: To make the monitor attached to the Adaptor

as the primary display, follow the instructions below:

Targus USB 2.0 Multi - Monitor Adapter

1. In Display Properties window, using the drop down list, select the monitor

that is attached to the Adaptor.

Windows Vista Windows XP

2. After selecting the corresponding monitor, check the box next to “extend

the desktop onto this monitor” (for Vista) or “extend my Windows desktop

onto this monitor” (for XP).

Windows Vista Windows XP

Targus USB 2.0 Multi - Monitor Adapter

3. Then, check the box next to “This is my main monitor” (for Vista) “ Use this

device as the primary monitor” (for XP).

Windows Vista Windows XP

4. Click “Apply”.

5. Select the Laptop monitor using the drop down list and uncheck the box

“extend the desktop onto this monitor” (for Vista) or “ Extend my Windows

desktop onto this monitor” (for XP) and click “Apply”

The monitor attached to the Adaptor stays primary if the PC enters hi-

bernate or suspend mode or is rebooted. If the Adaptor is detached, the

laptop’s display becomes primary again.

NOTE: IT IS POSSIBLE TO WORK MORE CONVENIENTLY WITH A LAPTOP BY SETTING ITS ACTION

ON LID CLOSED TO ‘DO NOTHING’ AND SETTING THE DOCKING TO PRIMARY MODE. THE LAPTOP

LID CAN THEN BE CLOSED AND THE LAPTOP USED WITH THE EXTERNAL KEYBOARD AND MOUSE.

Windows Vista Windows XP

Upon reconnection, the monitor attached to the Adaptor will return to pri-

mary mode.

Targus USB 2.0 Multi - Monitor Adapter

Controlling the Display using Windows

Display Properties (for Windows 7)

Adaptor’s video setting can also be congured from the Windows Display

Properties dialog box. To do this on Windows 7, right click on the desktop,

click on “Personalize” and then select the ‘Display” and then “Change dis-

play setting’ link. Or right click on “Targus USB Video adapter” icon in the

notication area and choose “advance”.

The various display output setting can be controlled by choosing the options

provided in the “multiple display” drop-down list. Choose the desired setting

and click “apply”. The screen will refresh and conrm ok by selecting “keep

changes”.

Automatic Updates

Automatic Updates is a product maintenance feature from DisplayLink. The

automatic update mechanism ensures that the Adaptor’s graphics Adapter

has the most up-to-date drivers and software, providing the user with in-

creased performance and stability.

Disconnecting the Adaptor

If the Adaptor is powered off or the USB cable is removed from the comput-

er, the display blanks. All windows and icons will shift to the primary screen.

On reconnection or powering up of the Adaptor, the display returns to the

same mode as it was before disconnection. However, windows and icons

that were previously on the screen will not be moved back.

Inhaltsverzeichnis

Sprachen:

Andere Targus Adapter Handbücher

Targus

Targus ACB20 Bedienungsanleitung

Targus

Targus APA109 Bedienungsanleitung

Targus

Targus APK01EU Bedienungsanleitung

Targus

Targus ACA933EU Bedienungsanleitung

Targus

Targus APP2001US Bedienungsanleitung

Targus

Targus PA088U Bedienungsanleitung

Targus

Targus USB Bluetooth Bedienungsanleitung

Targus

Targus ACA958 Bedienungsanleitung

Targus

Targus APA803 Bedienungsanleitung

Targus

Targus APD10EU Bedienungsanleitung

Targus

Targus APA01AP Bedienungsanleitung

Targus

Targus ACA958USZ Bedienungsanleitung

Targus

Targus ACA038US Bedienungsanleitung

Targus

Targus ACB20US Bedienungsanleitung

Targus

Targus APD10US Bedienungsanleitung

Targus

Targus PA082U Bedienungsanleitung

Targus

Targus PA070U Bedienungsanleitung

Targus

Targus APA109 Bedienungsanleitung

Targus

Targus APA106 Bedienungsanleitung

Targus

Targus ACA932 Bedienungsanleitung

Targus

Targus APM62US-02 Bedienungsanleitung

Targus

Targus APK01US Bedienungsanleitung

Targus

Targus CHILL MAT PLUS Bedienungsanleitung

Targus

Targus Universal 70W Power Adapter Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung