Tascam CD-VT1 Bedienungsanleitung

CD-VT1

Portable CD Vocal

Trainer

OWNERʼS MANUAL (EN / F / D / I / E)

 is appliance has a serial number located

on the rear panel lease record the model

number and serial number and retain them

for your records

odel number

_____________

erial number

_____________

D00771600A

EnglishFrançais

Deutsch

Español Italiano

— TASCAM C

D-VT1

English

Important safety precautions

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The lightning  ash with arrowhead symbol,

within an equilateral trinagle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s en-

closure that may be of suf cient magnitude to

constitute a risk of electric shock to persons.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

FOR U.S.A.

TO THE USER

This equipment has been tested and found to

comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable pro-

tection against harmful interference when the

equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can

radiate radio frequency energy and, if not in-

stalled and used in accordance with the instruc-

tion manual, may cause harmful interference to

radio communications.. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one or

more of the following countermeasures.

Reorient or relocate the receiving antenna

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit other from that to which the receiver

is connected.

Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

Changes or modi cations to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to

operate this equipment.

D-VT1

English

TASCAM CD-VT1 —

English

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampli ers) that produce heat.

Do not defeat the safety purpose of the po-

larized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug

does not  t into your outlet, consult an electrician

for replacement of the obsolete outlet.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the ap-

paratus.

Only use attachments/accessories speci ed by

the manufacturer.

Use only with the cart, stand, tripod, bracket,

or table speci ed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

Refer all servicing to quali ed service person-

nel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the appara-

tus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

•

Do not expose this apparatus to drips or

splashes.

•

Do not place any objects  lled with liquids,

such as vases, on the apparatus.

•

Do not install this apparatus in a con ned

space such as a book case or similar unit.

•

The apparatus draws nominal non-operating

power from the AC outlet with its POWER switch in

the off position.

— TASCAM C

D-VT1

English

Safety Information

This product has been designed and manu-

factured according to FDA regulations “title

21, CFR, chapter1, subchapter J, based on the

Radiation Control for Health and Safety Act

of 1968”, and is classi ed as a class 1 laser

product. There is no hazardous invisible laser

radiation during operation because invisible

laser radiation emitted inside of this product is

completely con ned in the protective housings.

The label required in this regulation is shown

here.

CAUTION

•

DO NOT REMOVE THE PROTECTIVE HOUSING

USING A SCREWDRIVER.

•

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

•

IF THIS PRODUCT DEVELOPS TROUBLE, CON-

TACT YOUR NEAREST QUALIFIED SERVICE

PERSONNEL, AND DO NOT USE THE PROD-

UCT IN ITS DAMAGED STATE.

Optical pickup: Type KSM-900AAA

Manufacturer: SONY CORPORATION

Laser output: <1 mW play on the objec-

tive lens

Wavelength: 775—816 nm

Important Safety Instructions

TASCAM CD-VT1 —

English

First steps with your CD-VT1

.....

Making connections

..................

Using the menus

........................

Using the CD player

.................

Pitch and tempo changes

........

Using effects

............................

Facts &  gures (speci cations)

About this manual

hen we refer to a key or connector

or control on the  we write it

like this

PLAY



hen we refer to an item shown on the

display we write it like this



Inserting batteries

 e  uses four  

batteries not supplied e recom

mend the use of rechargeable i

batteries alkaline batteries may also

be used



lways use batteries of the same

type



lways replace all batteries to

gether



f you are not going to use the

 for some time remove

the batteries



lace the batteries following the

and

–

markings inside the battery

–

markings inside the battery

–

compartment



aximize battery life by using

the unit in the following tempera

ture range ˚ to ˚ ˚ to

˚ ickelhydride batteries

may exhibit reduced performance

in an environment under ˚

˚ lso if these batteries

are not used for some time after

charging they may also exhibit

reduced performance



 e performance of alkaline bat

teries also depends on temperature

and time since manufacture low

temperatures and longer periods

mean shorter battery life regard

less of the battery indicator as

shown on the display ear this

in mind when operating the unit

and use freshly recharged nickel

hydride batteries new alkaline

batteries or use an  adapter if

battery life seems inadequate



lways dispose of used batteries

as recommended by your local

authorities

— TASCAM CD-VT1

6 — TASCAM CD-VT16

English

First steps with your CD-VT1

hen the battery level drops the unit

automatically shuts down and must be

restarted with the

POWER

switch after

the batteries have been replaced

ote that the battery indicator on the

display only provides a rough estimate

of remaining battery life and under

some circumstances there may not be

enough power in the batteries to power

the  despite the battery

power indication on the display

Using an AC adapter

nly use a   adapter

not supplied sing another type of

 adapter may damage your 



lways make sure that the  voltage

matches the voltage written on the 

adapter

NOTE

Always remove batteries when operating the

unit with an AC adapter. If batteries are ac-

cidentally left in the unit when it is operated

with an AC adapter, always switch off the

unit before changing from AC adapter to

battery power or switching from battery to

AC adapter operation.

Switching on the unit

 e  has two power switches

se the  rst

POWER

switch sliding

switch to turn the power to the whole

unit on and o 

 e second switch

MIC ON/OFF



controls the power to the

MIC

jacks

and e ect unit f this section is o  you

cannot use these jacks or use any of the

vocalrelated menu systems e ect and

voice changer

lso note the

HOLD

switch that locks

the s controls and keys when

it is in the

position 

HOLD

appears in

the display when this switch is on

Auto power-save

f the unit is powered using batteries

for more than  minutes in stop mode

or with no disc loaded or opened the

 player shuts down display shows

CD OFF

 but you can still use the vocal

section

estart the  player alone by using

the

key or use the

POWER

switch if both the  and vocal sec

tions are turned o 

English

TASCAM CD-VT1 —

English

Making connections

Inputs

Connecting microphones

nly use lowimpedance dynamic

microphones you can use highimped

ance microphones but the quality may

su er or selfpowered condenser mi

crophones preferably with unbalanced

connectors o connect a microphone

to the unit simply connect the plug at

the end of the microphone cord to one

of the

MIC IN

jacks of the 

f you are using only one microphone

you can connect it to

MIC IN 1

MIC

IN 2



ake sure the

MIC ON/OFF

power

button is pushed to activate the micro

phone and e ects etc

Connecting a stereo line source

ou can also connect a stereo line

source such as the outputs from a syn

thesizer a guitar preampli er or rack

mount e ects unit or a cassette deck

etc to the  se the

LINE IN

minijack beside the

MIC IN

jacks  is

unit will not be able to use the e ects

of the 

WARNING

You should NEVER connect the speaker out-

puts of a bass or guitar ampli er to anything

except speakers. If you are in any doubt at all

about what you can connect to your CD-VT1,

ask someone who knows.

Outputs

onnect the unit to a stereo systems

 input the inputs of a cassette

 or  recorder or mixer input

etc using a suitable stereo cable not

supplied connected to the s

LINE OUT

stereo minijack

onnect a pair of headphones not

supplied to the

PHONES

stereo mini

jack for private listening

NOTE

If you are singing, and listening through

speakers, you should site the microphones

and speakers to avoid feedback.

— TASCAM CD-VT1

8 — TASCAM CD-VT18

English

Use the INPUT

control to adjust the

MIC IN level(s)

You can't adjust the

input level of LINE IN

from the CD-VT1

Use the OUTPUT

control to adjust

the overall level

to the LINE OUT

and headphones

The CD plays at a fixed

level, but the MIX

feature (5 and b keys

outside menu mode)

adjusts the balance

betwen input and CD

Making connections

Adjusting the balance

Inputs

 e  has three input sources



the  being played



the microphones connected to

the

MIC IN

jacks



any stereo input connected to the

LINE IN

jack

 e  rst and last of these cannot have

their input levels changed by the 

 but see below for details of how

to balance the  with the input



se the level control of the device

connected to

LINE IN

to adjust the

level of this source remember that

this source cannot be e ected by

the s e ects



se the s

INPUT

control

to adjust the level of the micro

phones before they are sent to the

e ect



hen a menu is not selected you

can use the

and

keys to set

the relative balance of the micro

phone inputs but not the

LINE

source compared to the output

from the  player  is

MIX

value

can be set to between

–5

and



emember that this is only pos

sible when not in menu mode or

when editing e ects

Outputs

 ere are two outputs the line and the

headphones  ese cannot have their

levels set separately—use the

OUTPUT

control to set the overall output level

English

TASCAM CD-VT1 —

English

Using the menus

ee the table on this page for details of

the two menus and their settings

o enter the menu system press the

LCD MENU

key until the menu you

want appears shown in a  ashing re

versed box and the  rst menu item is

shown on the main part of the screen

se the up or down keys 

and

 to set the value of the  rst menu

item

ote that you do not need to press

ENTER

to set the values  e settings

change as soon as the key is pressed

ress

ENTER

to move to the next

menu item in the list

ress

to move to the next menu

and its  rst menu item

xit the menu system using the

DISPLAY/ESC

key

Menu Menu

item Values Notes

KEY

5 to

sets key change in semitones

FINE

–50 to +50

sets key change in cents

SSA

0, –8, –16, –32, –50

sets slow speed audition speed

PLAY

ALL/SGL

all or single play

CUE

CUE/FLS

cue or “ ash play” operation

— TASCAM CD-VT1

English

Using the CD player

 e s  player works

in much the same way as other 

players with a few minor di erences

and special features as explained on

this page

oad s label side up shiny side

down in the  pen and

close the player door by hand by lifting

the door tab marked

PULL



 e display shows

OPEN

when the door

is opened

when it is closed and

TOC READ

when a s able of on

tents  is being scanned by the

unit after being loaded

NOTE

The CD-VT1 cannot play un nalized CD-R/

RW discs. In addition, some  nalized CD-R/

RW discs may be unplayable on the CD-VT1.

Playback

ress the playpause 

Á/π

 key to

start playback and to pause playback

ress the stop key 

 to stop play

back

Display

se the

DISPLAY/ESC

key to change

the display between track elapsed

time track remaining time and total

remaining time you cannot do this in

menu mode

Skipping between tracks

se the two skipsearch keys marked

Ô?Â

and

¯?

 to move

back and forward a track at a time by

pressing and releasing the appropriate

key

Searching within tracks

se the skipsearch keys to search

within the disc by pressing and hold

ing the appropriate key

The CUE key

 e

CUE

key is a special feature of the

 hen you press this key the

playback position returns to the last

point where playback started

hat happens next depends on the

CUE

menu item setting in the

menuf this is set to

CUE

 playback is

paused at the cue point but if it is set

FLS

 playback restarts from the cue

point 

FLASH

is shown on the display

Looping (track)

sing the

PLAY

menu item set

SGL

sin

gle play ress the

LOOP

key so that

you see

LOOP 1

on the display bottom

left  e current track will repeat

Looping (disc)

sing the

PLAY

menu item set

ALL

play

all the disc ress the

LOOP

key so

that you see

LOOP

alone on the display

bottom left  e whole disc will

repeat

Looping (I/O points)

se the

I/O

key to set the start in

point of the loop then use the key to

set the end out point  e section be

tween the points will repeat seamlessly

ressing the

I/O

key again clears the

loop points and cancels loop mode

Andere Handbücher für CD-VT1

Inhaltsverzeichnis

Sprachen:

Andere Tascam CD-Player Handbücher

Tascam

Tascam CD-6010 Anleitung zur Verwendung

Tascam

Tascam CD-A700 Bedienungsanleitung

Tascam

Tascam CD-355 Bedienungsanleitung

Tascam

Tascam CD-450 CD-450 Bedienungsanleitung

Tascam

Tascam CD-200IB Konfigurationshandbuch

Tascam

Tascam CD-A580 Bedienungsanleitung

Tascam

Tascam CD-302 Bedienungsanleitung

Tascam

Tascam CD-160MK Bedienungsanleitung

Tascam

Tascam CD-01U Professional Bedienungsanleitung

Tascam

Tascam CD-VT1 Bedienungsanleitung

Tascam

Tascam CD-240 Bedienungsanleitung

Tascam

Tascam CD-A630 Leitfaden

Tascam

Tascam CD-9010 Bedienungsanleitung

Tascam

Tascam CD-9010CF Bedienungsanleitung

Tascam

Tascam CD-400U Bedienungsanleitung

Tascam

Tascam CD-601MKII Bedienungsanleitung

Tascam

Tascam MDD-CCDD1 Bedienungsanleitung

Tascam

Tascam CD-200i Bedienungsanleitung

Tascam

Tascam CD-200 Bedienungsanleitung

Tascam

Tascam CD-150 Bedienungsanleitung

Tascam

Tascam CD-500 Anleitung zur Verwendung

Tascam

Tascam CD-305 Bedienungsanleitung

Tascam

Tascam CD-A550mkII Bedienungsanleitung

Tascam

Tascam CD-200SB Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung