Tasman 1001 Bedienungsanleitung

1000-Series Routers

T1 and E1 products

Quick

Start

Guide

RelatedGuides

Installation Guide:1000-Series Routers

Refer to this guide for more detailed information about safety and how to install, configure, operate, and troubleshoot this product.

Command Reference Guide

This guide provides detailed information and examples about how to use CLI commands in an E1/J1 network environment.

Routing User Guide

This guide provides detailed information and examples about using routing commands on Tasman Networks products for RIPv1,

RIPv2, OSPF, BGP4, and other routing protocols.

Configurations Guide

This guide provides detailed examples of routing configurations.

CAUTION: To reduce the risk of fire, use only number 26 AWG or larger UL Listed or CSA Certified Telecommunication

Line Cord for all network connections.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the

instructions.

Hardware Notice

The Lithium battery in this product is part of a non-volatile memory device and will retain data for 10 years in the absence of power.

Tasman Networks does not consider the lithium battery in this unit a field replaceable or serviceable part and should not be accessed by

the customer.

WARNING: Before working on this equipment be aware of good safety practices and the hazards involved with electrical

circuits.

Contacting Tasman Networks

Phone 1-408-216-4700

Fax 1-408-216-4701

Support 1-866-4tasman

Sales 1-408-216-4700

Email info@tasmannetworks.com

sales@tasmannetworks.com

support@tasmannetworks.com

feedback@tasmannetworks.com

Internet www.tasmannetworks.com

U. S. Mail Tasman Networks, Inc.

5400 Hellyer Avenue

San Jose CA 95138

USA

Tasman Networks

111-00136-04

TiOS 8.3 March 2005

Tasman Networks Quick Start Guide: 1000-Series Routers 3

The Tasman Networks 1001, 1002, and 1004 multi-scalable router is designed to provide WAN to LAN networking

connectivity for branch office communication and primary Internet access for medium-size businesses. The 1001, 1002,

and 1004 provides one or two WAN ports, two 10/100 Fast Ethernet ports, an AUX port, and a local/remote management

Console port. Alternatively, WAN ports 1 and 2 can be utilized as a DSX interface for connecting to a PBX or key

system.

BeforeYouBegin

Unpackingand Inspecting

Inspect the shipping carton for damage. If any items are missing or defective, contact Tasman Networks

at 1-866-4tasman. Save the original shipping carton and packing material in case you need to return the equipment to

Tasman Networks.

The following items are shipped with this product.

Figure 1 Items Shipped with the 1001, 1002, and 1004 Router

1001, 1002, or 1004 router (1004 shown) Quick start guide

Power supply for 1002 and 1004 - 1001 power supply plugs

directly into an AC outlet Warranty and registration cards and product documentation CD

ROM

AC power cord Female DB-9 to RJ-45 adapter (left) and male DB-25 to

RJ-45 modem adapter (right)

4 Quick Start Guide: 1000-Series Routers Tasman Networks

Wall-Mounting Option

An optional wall-mounting assembly is available for mounting the 1001, 1002, and 1004 router on a vertical surface.

The wall-mount components are shipped in the same box with the 1001, 1002, and 1004 router and are shown in the

following figure.

Figure 2 Wall-Mount Components

DC power cable retainer bracket Console cable

Wall-mount brackets

Power supply strap Router to wall-mount bracket screws: (4) 4-40 x .250 inch

Phillips pan head

Hollow wall anchors Wall-mount screws: (4) 6 x 1 inch Phillips pan head

1002 and 1004 1001

Tasman Networks Quick Start Guide: 1000-Series Routers 5

Rack-Mounting Option

An optional rack-mounting tray is available for installing the 1002 and 1004 router in an equipment rack. The following

items are shipped in a separate carton:

Figure 3 Rack-Mount Components

(2) Mounting Brackets (4) Velcro Tie Wraps (2 sets) Velcro Mounting Pads

(4) 10-24 x .5 Phillips

Pan Head Screws for

Equipment Rack

(4) 12-32 x .5 Phillips

Pan Head Screws for

Equipment Rack

(6) 6-32 x .25 Phillips

Flat Head Mounting

Bracket Screws

(4) 4-40 x .25 Phillips

Pan Head Rack Carriage

Screws

Rack Tray

(2) Rack Carriage

Assemblies

6 Quick Start Guide: 1000-Series Routers Tasman Networks

Additional Cables

The following additional cables are required for installing the 1001, 1002, and 1004.

Figure 4 Additional Cables Required

Tools Required

The following tools are required for installing the 1001, 1002, and 1004.

Figure 5 Tools Required for Installation

Installation Site

The 1001, 1002, and 1004 is designed to be installed in an equipment rack; on a vertical surface; or on a flat, stable

surface. The installation site should provide ample room for connecting cables and should not be subject to extreme

temperature shifts. The router should be located in close proximity to all relevant telecommunication ports.

One or two RJ-45, male/male, category 5, twisted-pair cable

(Ethernet LAN connection) One to two RJ-48C, male/male, 26 AWG (minimum) category 5,

straight-through cable (WAN connection)

#2 Phillips screwdriver #3 Phillips screwdriver 1/4 inch flat blade screwdriver

Tasman Networks Quick Start Guide: 1000-Series Routers 7

1001 Router Components

The following section identifies and describes the 1001 router network ports and LEDs. The Model-1000 series routers

also supports a Web User Interface which can be used to configure basic operational and security features. For more

information on the Web UI, refer to the 1000-Series Router Web User Interface User Guide.

Figure 6 1001 Router Front Panel

Figure 7 1001 Router Back Panel

Back Panel Ports

Table 1 provides information about ports located on the router back panel.

Table 1 1001 Back-Panel Ports

port description

WAN 1 WAN connection port. These ports accept cables with RJ-48C connectors. )

Backup WAN An ISDN backup option is supported in releases 8.3 and higher. This option provides a backup if the primary

network connection is lost. This port accepts cables with RJ-45 connectors.

FE 0 - FE 1 Ethernet LAN connection ports. These ports accept cables with RJ-45 cable connectors.

AUX Reverse telnet connection. This port accepts a cable with an RJ-45 cable connector.

Console Console management port. This port accepts a cable with an RJ-45 cable connector.

DC power 12 VDC power connection. This port accepts the 2 mm power connector on the power supply cable that ships

with the 1001 router.

Ethernet 0 LEDs Ethernet 1 LEDs

LINK/ACT HS DUP LINK/ACT HS DUP

WAN Port

LED

Power LED

Compact Flash

Fast Ethernet

Port 0 Fast Ethernet

Port 1 AUX Port 12 VDC

Input Jack

WAN Port

Backup WAN Port Console

Port

8 Quick Start Guide: 1000-Series Routers Tasman Networks

Front Panel LEDs

The Tasman Networks 1001 router front-panel LEDs indicate real-time unit status. Table 2 provides information about

how to interpret the LED states. For more detailed LED information and troubleshooting tips, refer to the 1000-Series

Installation Guide.

Table 2 1001 Router LEDs

LED description color

WAN Status Indicates traffic activity on this interface Green = normal activity

Red = alarm state

Yellow = test mode

Ethernet 0/1

Link/Act Indicates traffic activity on this interface Green = link is operational

Blinking Yellow = either receiving or sending traffic

Red = packet collisions

HS Indicates traffic speed on the interface Off = 10 Mbps

Green = 100 Mbps

Dup Indicates the type of duplex mode Off = Half duplex

Green = Full duplex

Power Indicates router power status Off = power off

Green = power on

Tasman Networks Quick Start Guide: 1000-Series Routers 9

1002 Router Components

The following section identifies and describes the 1002 router network ports and LEDs. The Model-1000 series routers

also supports a Web User Interface which can be used to configure basic operational and security features. For more

information on the Web UI, refer to the 1000-Series Router Web User Interface User Guide

Figure 8 1002 Router Front Panel

Figure 9 1002 Router Back Panel

Back Panel Ports

Table 3 provides information about ports located on the router back panel.

Table 3 1002 Back-Panel Ports

port description

WAN 1 - WAN 2 WAN connection port. These ports accept cables with RJ-48C connectors. If drop and insert is configured, then

ports 1 and 2 are reserved for that feature.

FE 0 - FE 1 Ethernet LAN connection ports. These ports accept cables with RJ-45 cable connectors.

AUX Reverse telnet connection. This port accepts a cable with a male DB-9 connector.

Console Console management port. This port accepts a cable with an RJ-45 cable connector.

DC power 12 VDC power connection. This port accepts the 2 mm power connector on the power supply cable that ships

with the 1002 router.

WAN Port

LEDs 1-2 Ethernet 0 LEDs Ethernet 1 LEDs

Power LED

LINK/ACT HS DUP LINK/ACT HS DUP

WAN Ports 1 - 2 Fast Ethernet

Port 0 Fast Ethernet

Port 1 AUX Port Console

Port 12 VDC

Input Jack

10 Quick Start Guide: 1000-Series Routers Tasman Networks

Front Panel LEDs

The Tasman Networks 1002 router front-panel LEDs indicate real-time unit status. Table 4 provides information about

how to interpret the LED states. For more detailed LED information and troubleshooting tips, refer to the 1001, 1002,

and 1004 Installation Guide.

Table 4 1002 Router LEDs

LED description color

WAN Status 1-2 Indicates traffic activity on this interface Green = normal activity

Red = alarm state

Yellow = test mode

Ethernet 0/1

Link/Act Indicates traffic activity on this interface Green = link is operational

Blinking Yellow = either receiving or sending traffic

Red = packet collisions

HS Indicates traffic speed on the interface Off = 10 Mbps

Green = 100 Mbps

Dup Indicates the type of duplex mode Off = Half duplex

Green = Full duplex

Power Indicates router power status Off = power off

Green = power on

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tasman Netzwerk-Router Handbücher

Tasman

Tasman 1200 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise