beams both light up, and the machine will be self-leveling. Key
indication light is green.( If key indication light is red, and lines flash,
it indicates the lines is not level, please put laser level on much
flatter place, because the self-leveling rang is about 40)
• Press the key button, horizontal laser beam close, vertical laser
beam keeps light.
• Press the key button again, horizontal laser beam light up, vertical
laser beam close.
• Press the key button again, horizontal and vertical laser beam both
light up.
Turn Lock Switch at ‘ ’ position, laser level switch off
2, Locked Mode:
When Lock Switch at ‘ ’ position, long-press key button, vertical
and horizontal laser beams both light up and flash every 5 seconds ,
the indication light is red.
• Press the key button, horizontal laser beam close, vertical laser
beam keeps light.
• Press the key button again, horizontal laser beam light up, vertical
laser beam close.
• Press the key button again, horizontal and vertical laser beam both
light up. Move in circles
In this case, you can get any inclined single line or cross lines.
Long time press key button, laser line switch off.
REMARK: If the indication light is red and flash, it indicates the
product should be recharged.
3, Power saving mode
When the tool is working, short-press “ ”key button, this tool
enters the energy-saving mode:
1. The first press, the brightness reduces to 80% of the maximum
brightness;
2. The second press, reduces to 65%;
3. The third press, reduces to 50%;
4. The fourth press, returns to the maximum brightness
4, Battery indicator
The battery indicator is 4 green LED light, the quantity of indicator lights
become less show that the power weak, when there are only one LED
light flashes, the device should be charged in time.
COMMON QUESTIONS AND ANSWERS
1. How to make it self-leveling? I failed even it is at ‘ ’ position
Answers: The range of its auto self-leveling is ±4°. When the tool
inclines more than 4°, the laser line will flash. Then please put laser
level on much flatter place
2. I can’t turn this tool off, what should I do?
Answers: It is different to turn it off in 2 modes.
If you use the auto self-leveling mode and the lock switch is at
‘ ’position, Please turn lock switch at ‘ ’ position and it will
stop working
If you use the locked mode and the lock switch is at ‘ ’.
Please press key button for long time and it will stop working.
3.Can I put this tool on a tall tripod when I want to install
the cabinet?
Answer: Yes,this tool could be used on a tripod to get the height
that you want, and it also has a 1/4’ mounting thread for you to
install the stand(include in the package)
4.Is Green Laser light safer than red?
Answer: No matter the color, a laser beam should never be looked
at directly. A glancing view will not damage just do not look at any
period of time. And the GREEN laser light is more visible than the
red.
5.What I should do when I have some problems about the laser
level? Or there are something lost in the package?
Answer: Contact us directly. Any questions or problems, please feel
free to contact us via email: service@tavool.com. We offer 2 year
warranty and will provide you the best solution according to your
exact issue. WE NEVER LET OUR CUSTOMER SUFFER ANY
LOSS!
MAINTENANCE
• The laser tool is sealed and calibrated at the plant to the accuracy
specified.
• It’s recommended to carry out a accuracy check before its firstuse
and periodic checks during future use especially for precise layouts.
• Do not short any battery terminals or charge alkaline batteries or
dispose of batteries in fire.
• Do not mix old and new batteries. Replace all of them at the same
time with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for severalmonths.
• Do not store the laser tool in direct sunlight or expose it to high
temperatures.
The housing and some internal parts are made of plastics and may
become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although
these parts are solvent resistant, NEVER use solvents. Use a soft,
dry cloth to remove moisture from the tool before storage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
WARRANTY
We are confident of the quality of our products and offer outstanding
guarantee for professional users of the products. This statement is in
addition to and in no way prejudices your contractual rights as a
professional user or your statutory rights as a private non-profes-
optional user. We warrant our laser level(s) against faults in
materials and workmanship for one year from date of purchase
provided that:
• Proof of purchase is produced.
• Service/repairs have not been attempted by unauthorized persons;
• The product has been subject to fair wear and tear;
• The product has not been misused;
Defective products will be repaired or replaced, free of charge or at
our discretion,if sent together with proof of purchase to our
authorized distributor(s).
This Warranty does not cover faults caused by accidental damage,
unfair wear and tear, and use other than in accordance with the
manufacturers’ instructions or repair or alteration of this product not
authorized by us.
Repair or replacement under this Warranty does not affect the expiry
date of the Warranty.
To the extent permitted by law, we shall not be liable under this
Warranty for indirect or consequential loss resulting from faults in
this product. This Warranty may not be varied without our
authorization. Calibration and care are not covered by warranty.
