TC Electronic D22 Montage- und Bedienungsanleitung

ADDENDUM for the D22 MANUAL

Max Delay time

The D22 is now delivered with a max Delay time of

5200ms per channel. This applies for units with serial

numbers above 2000990 (see backpanel of unit).

If your unit has a serial number below 2000990 the max.

Delay time is either 1300ms or 2600ms.

For these units an upgrade-kit is available. Contact your

local dealer for more information.

• This addendum cover changes to the manual revision 3.1.

• Newest software is now 2.50.

The Complete manual including the changes below can be downloaded from www.tcelectronic.com

Frequently Asked Questions

Question: What parameters can be set using serial

remote control of the D22?

Answer: Preset change, Delay time and Bypass using an

RS485/422/232 controller.

Question: What serial protocol is used?

Answer: The serial protocol is 9600, N, 8, 1.

This means 9.6 kbaud, no parity, 8 bit, 1 stop.

Question: What is the command structure for the

remote protocol?

Answer: #AA,CMD,VALUE<CR>

AA is Unit Address number as set on the Utility page.

CMD is command. Commands could be:

• PRE for preset change,

• BYP for Bypass,

• DEL for delay.

VALUE is (RAM) Preset number, 0 for Not Bypass,

1 for Bypass or amount of Delay.

<CR> is carriage return, the same as Enter or hex 0D.

Examples:

#05,PRE,10<CR> =Recall RAM preset no. 10 on D22

address 5.

#03,BYP,1<CR> =Bypass D22 address 3.

All commands and numbers are shown as ASCII.

Question: What is the data length of the delay time?

Answer: The delay is always a decimal number related to

the given delay unit of the D22. It is not possible to change

delay unit via the RS-485, so you must set this manually

before you send the command lines.

Example 1:

The delay unit is ms and you would like to set the delay to

10.5 ms:

#05,DEL,10.5<CR>

Example 2:

The delay unit is frames and you would like to set the delay

to 10.5 frames: #05,DEL,10.5<CR>

As you can see there is no difference between Example 1

and 2.

Example 3: The delay unit is ms and you would like to set

the delay to 10.5 frames:

You have to calculate the delay in ms yourself based on

the fps setting and then send a command-line.

Question: What ASCII characters should be sent for

Recall of RAM preset no. 10 on D22 address 5?

Answer: #05,PRE,10<CR> means these values (hex)

actually transmitted 23 30 35 2C 50 52 45 2C 31 30 0D

If you have questions left unanswered by the manual and

this addendum please refer to TC Support Interactive:

www.tcsupport.tc

TC Electronic, Sindalsvej 34, DK-8240 Risskov - [email protected]

D22 manual addendum

Rev 1 - SW - V 2.50

Prod. No. 608022311

Andere Handbücher für D22

Inhaltsverzeichnis

Andere TC Electronic Aufnahmegeräte Handbücher

TC Electronic

TC Electronic M2000 Bedienungsanleitung

TC Electronic

TC Electronic DRIP SPRING REVERB Bedienungsanleitung

TC Electronic

TC Electronic INTONATOR Bedienungsanleitung

TC Electronic

TC Electronic TC 1280 Bedienungsanleitung

TC Electronic

TC Electronic FireworX Bedienungsanleitung

TC Electronic

TC Electronic HALL OF FAME 2 MINI Bedienungsanleitung

TC Electronic

TC Electronic TC2290 Bedienungsanleitung

TC Electronic

TC Electronic DVR250 NATIVE Bedienungsanleitung

TC Electronic

TC Electronic DB6 Bedienungsanleitung

TC Electronic

TC Electronic Nova Dynamics NDY-1 Bedienungsanleitung

TC Electronic

TC Electronic P2 Level Pilot Gebrauchs- und Pflegehandbuch

TC Electronic

TC Electronic FireworX Bedienungsanleitung

TC Electronic

TC Electronic NOVA System Bedienungsanleitung

TC Electronic

TC Electronic TC ICON PEQ 3000 NATIVE Bedienungsanleitung

TC Electronic

TC Electronic UpCon Bedienungsanleitung

TC Electronic

TC Electronic Mastering 6000 Montageanleitung

TC Electronic

TC Electronic Konnekt Live Bedienungsanleitung

TC Electronic

TC Electronic C400XL Bedienungsanleitung

TC Electronic

TC Electronic G-Natural Bedienungsanleitung

TC Electronic

TC Electronic G-MAJOR 2 Bedienungsanleitung

TC Electronic

TC Electronic Impact Twin Bedienungsanleitung

TC Electronic

TC Electronic REVERB 4000 Bedienungsanleitung

TC Electronic

TC Electronic Natural Bedienungsanleitung

TC Electronic

TC Electronic Flashback X4 Delay Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch