Techcom VS110 Bedienungsanleitung

VS110

SIP

VoIP Telephone Adaptor

User Manual

V2.1h

Quick Guide

Step 1: Broadband (ADSL/Cable Modem) Connections for VS110

A. Connect VS110 LAN port to ADSL NAT Router as the following connection.

B. Connect VS110 PC port to Notebook PC LAN port using a Category 5 LAN cable.

C. Connect VS110 RJ11 PHONE port to a Telephone Set.

D. Connect DC PowerAdaptor.After power on, the POWER LED will be Green ON. In 5 seconds,

the PHONE LED will start flashing 5 times and be ready for configurations.

E. Pick up the phone, the PHONE LED will be lit, and you should hear a dial tone.

F. Press #121# and #120# from the phone to listen to IVR and to check the DHCP status and the

IP address (e.g. 192.168.123.1) for VS110. After the IP announcement, please hang up.

Figure A. ADSL Connections with NAT Router for VS110

Step 2: Settings for VS110 from PC Web Browser

A. VS110 is defaulted at embedded NAT mode.

B. Press #120# from the phone to listen and check IP address (default is 192.168.123.1) for

VS110.

C. Enter the IP address from PC Web browser for configuration settings.

Example:Enter http://192.168.123.1 from IE Web browser to display login page.

D. Enter the user name and password into the blank field. The default settings are

Username: root

Password: test .

Click the “Login” button to enter for configurations.

PC Phone

NAT Router

VS110 IP: 192.168.123.1

LAN

PC IP: 192.168.1

ADSL Modem

E. You need to set up the following web configurations: Phone Settings, Network, SIP Settings,

NAT Settings for registration to a SIP server. Remember to submit, save and reboot for

new configurations.

F. The PHONE LED will be Green flashing showing a successful registration in the SIP server.

For further detail configurations, please refer to the user manual.

Step 3: Making Point-To-Point SIP Calls

A. While the PHONE LED is flashing continuously showing a successful registration in the SIP

server.

B. Pick up the phone, and you should hear a dial tone.

Press 123456# to call the party with the number 123456 registered in the SIP server. Note # is

used to send out the call immediately. In a moment, you should hear the ring back tone, and

wait for the called party to answer. For more applications, please refer to the user manual.

Note: Difficulties in configuring VS110?

Please refer to the last chapter for trouble shootings.

TABLE OF CONTENTS

1 INTRODUCTIONS....................................................................................................................................6

2 FEATURES ..............................................................................................................................................6

3 STANDARD COMPLIANCES ..................................................................................................................7

4 PACKING CONTENTS.............................................................................................................................7

5 LED INDICATORS....................................................................................................................................7

6 INSTALLATIONS & SIP CONFIGURATIONS ........................................................................................8

7 DEFAULT RESET BY TELEPHONE........................................................................................................8

8 CONFIGURATIONS BY WEB BROWSER...............................................................................................9

OGIN THE GATEWAY

................................................................................................................................ 9

YSTEM

NFORMATION

............................................................................................................................ 10

HONE

OOK

ETTINGS

........................................................................................................................... 11

Phone Book...................................................................................................................................... 11

HONE

ETTINGS

..................................................................................................................................... 12

Call Forward.................................................................................................................................... 12

SNTP............................................................................................................................................... 13

Volume .......................................................................................................................................... 14

DND................................................................................................................................................ 15

Caller ID.......................................................................................................................................... 16

Dial Plan.......................................................................................................................................... 17

Flash Time....................................................................................................................................... 19

Call Waiting..................................................................................................................................... 20

T.38 (FAX) .................................................................................................................................... 21

Hot Line........................................................................................................................................... 22

Alarm............................................................................................................................................... 23

ETWORK

............................................................................................................................................... 24

Network Status ............................................................................................................................... 24

WAN ............................................................................................................................................. 25

LAN ............................................................................................................................................... 26

DDNS ............................................................................................................................................ 27

VLAN ............................................................................................................................................ 28

DMZ................................................................................................................................................ 30

Virtual Server ................................................................................................................................. 31

L2TP................................................................................................................................................ 32

PPTP................................................................................................................................................ 33

SIP

ETTINGS

.......................................................................................................................................... 34

Service Domain................................................................................................................................ 34

Port Settings ................................................................................................................................... 36

Codec Settings ............................................................................................................................... 37

Codec ID Settings: ......................................................................................................................... 38

DTMF Settings: ............................................................................................................................. 39

Rport Settings: ............................................................................................................................... 39

Other Settings .................................................................................................................................. 40

NAT

RANS

............................................................................................................................................ 41

STUN ............................................................................................................................................ 41

THERS

................................................................................................................................................. 42

Auto Config..................................................................................................................................... 42

FXS Port.......................................................................................................................................... 44

MAC Clone...................................................................................................................................... 45

Tone ................................................................................................................................................ 45

Advanced......................................................................................................................................... 46

Status Log........................................................................................................................................ 47

SER

ASSWORD

..................................................................................................................................... 48

AVE

HANGES

....................................................................................................................................... 48

PDATE

................................................................................................................................................... 49

New Firmware ............................................................................................................................... 49

Auto Update: .................................................................................................................................. 52

Default Settings: ............................................................................................................................. 56

EBOOT

................................................................................................................................................... 57

9 CONFIGURATIONS BY TELEPHONE & IVR.......................................................................................58

10 VOIP APPLICATIONS EXAMPLES.....................................................................................................60

XAMPLE

SIP-

-SIP

ALLING

NSWERING

................................................................................... 61

XAMPLE

SIP

IRECT

ALLING

.............................................................................................. 61

XAMPLE

IRECT

ALLING

NSWERING

................................................................. 62

XAMPLE

IRECT

ALLING WITHIN

NAT

OUTER

.................................................. 62

XAMPLE

3-W

ONFERENCE

ALL

RANSFER

ALL

AITING

OLD

.............................. 63

XAMPLE

SIP-

-SIP

ALLING FOR HTTP

://

WWW

INPHONEX

COM

/................................................... 64

11 TROUBLE SHOOTING FOR WEB CONFIGURATIONS.....................................................................68

11.1.

NOT

HEAR

DIAL

TONE?.................................................................................................... 68

11.2.

CAN

NOT

ACCESS

WEB

PAGE? .............................................................................................. 68

11.3.

ONLY

ONE

AVAILABLE

FROM

ADSL/CABLE

SERVICE

PROVIDER?

.......................... 69

1Introductions

The VS110 is a single port Telephone Adaptor (TA) with SIP Protocols for Voice over IP (VoIP)

applications. Connecting to the Internet with a plain old telephone set (POTS), the VS110 can

make a voice phone call over the Internet from one IP to another. VS110 provides two Ethernet

ports for connections to Internet as well as Notebook PC. With an embedded NAT/DHCP

server, the VS110 can be easily configured by the Web browser, and is very suitable for ITSP

(Internet Telephony Service Providers) customers and SOHO users to make VoIP calls.

Note that VS110 requires an IP address, a subnet mask, and its gateway Router IP address for

its own use to connect to Internet. These three are available from your Internet service provider.

VS110 may enable PPPoE or DHCP features to automatically get an assigned dynamic IP from

the ITSP. Please refer to Section 8 Configurations by Web browser for detailed information.

2Features

The VS110 VoIP TA is equipped with one RJ11 connector for POTS, and two RJ45 connectors

for ADSL Modem/Router and PC connections. The VS110 is featuring as the following

Three LED Indicators for VS110: POWER, PHONE, LAN

RJ45 x 2 for WAN and LAN ports + RJ11 x 1 for FXS port

Configurations by Web Browser and Telephone

Embedded NAT/DHCP Server

PPPoE/DHCP Client for Dynamic IP plus NAT, DNS, and DDNS Clients

Support STUN server for NAT Traversal

Support registrations for up to 3 SIP Servers

Hot Line Mode

Dial Plan Settings

T.38 FAX over IP

Interactive Voice Recording (IVR) for telephone IP status

Phone Book, Call Forward/Waiting, Call Transfer/Hold, and 3-Way Conference Calls

Auto Configurations by TFTP, HTTP, or FTP server

Remote Firmware Upgraded with HTTP or TFTP server by Web PC

Direct IP/URL Dial without SIP Proxy or Dial number via SIP server

Telephone features: Volume Adjustment, Phone book, and Flash

Out-Band DTMF (RFC 2833) / In-Band DTMF / Send DTMF SIP Info

3Standard Compliances

The VS110 VoIP TA supports for the following standards

VoIP Protocol: IETF RFC3261 and RFC 2543 for SIP

SIPAuthentication: IETF RFC2069 and RFC 2617 for MD5

Speech Codec: ITU-T G.711, G.723, G.729A/B, VAD and CNG

Echo Cancellation: ITU-T G.165/168

4Packing Contents

Inside the package you should find:

⑴. One VS110 SIP TA

⑴. One AC to 12VDC/1A PowerAdaptor

⑴. One User Manual CD

Please check if the packing is damaged or any component is missing. If so, please contact your

distributor.

5LED Indicators

On the front panel of VS110, there are three LED indicators as the following

POWER: “On” indicates the power is normal

PHONE:“On” indicates the Phone is in use (off-hook) for VoIP call.

“Flashing” indicates successful registration at SIP server.

LAN: “On” indicates the LAN port of VS110 is in Connection.

“Flashing” indicates the data activity of LAN port.

6Installations & SIP Configurations

1. Connect VS110 RJ45 LAN port to ADSL Modem/Router using a Category 5 LAN cable.

2. Connect VS110 RJ45 PC port to Notebook PC using a Category 5 LAN cable.

3. Connect VS110 RJ11 PHONE port to a Plain Old Telephone Set (POTS).

4. Connect the power adaptor to power on VS110, and the POWER LED will be lit constantly.

5. The PHONE LED indicators will be OFF for about 5 seconds and start flashing for 5 times, and

remain OFF for VoIP configurations. The LAN LED will be constantly ON when any one of

RJ45 ports is connected. If the PHONE LED keeps flashing, it indicates that VS110 has

successfully registered in the SIP server.

6. Pick up the phone, the PHONE LED will be lit and you should hear a dial tone. If you hear a

busy tone, please check if the LAN port is connected properly.

7. Press #120# to listen and check the assigned IP address for the VS110. The default IP

address is 192.168.123.1. This IP address will be used for the Web configurations from

Notebook PC. Please refer to Section 8 for Web configurations.

8. After successful registration to the SIP server, the PHONE LED will keep continuous flashing.

Press 123456 to call the party with the number 123456 registered in the SIP server. In a

moment (5 seconds), you should hear the ring back tone, and wait for answer. Note that you

may press 123456# to dial out the number immediately. Dialing without # will not dial out until

the auto dial timer (default=5 seconds) elapsed.

7Default Reset by Telephone

VS110 provides an easy way to reset to factory defaults by using Telephone.

Pick up the phone and press #198#. The VS110 will reset back to factory defaults, and enter

into POWER ON cycle. The PHONE LED indicators will be OFF for about 5 seconds and start

flashing for 5 times. The POWER LED then will be lit constantly, and the PHONE LED will be

OFF. If the PHONE LED keeps flashing, it indicates that VS110 has successfully registered in

the SIP server.

8Configurations by Web Browser

You may enter the IP address from PC Web browser to configure VS110. For example, enter

http://192.168.123.1 from IE web browser to display login page as follows.

8.1. Please enter the default IP address http://192.168.123.1 from PC Web browser.

The following Web page shall be displayed on PC. If you have difficulties accessing the Web

page from the PC Web browser, the subnet IP of PC might be different from 192.168.123.xxx.

In this case, please refer to Chapter 11 for trouble shooting.

8.2. Please enter the username and password into the blank field. The default settings are:

Username: root

Password: test

8.3. Click the “Login” button will enter the management information page for system setup.

Note that whenever you change the setting in each Web page, please remember to click the

“Submit” button in the page, and click the “Save” button to save into the non-volatile memory and

click the “Reboot” button to activate the new settings.

System Information

8.4. You will see the system information such as firmware version, Codec, etc in this page.

8.5. You may click the button list at the left hand side to configure the VS110.

Model Name Show device Model Name.

Firmware Version Device Risc version, eg: Tue Jan 16 11: 8:3 007

Codec Version Device DSP version, eg: Wed Dec 0 17: 8:06 006

Call Status

Protocol Show device VoIP protocol.

Realm #1 Show the first registry information status

Realm # Show the second registry information status

Realm # Show the third registry information status

WAN Status

MAC address WAN port of MAC address

IP address/Netmask

IP address/netmask

Gateway Default router IP address

DNS DNS IP address

LAN Status

IP address/Netmask

Current LAN port IP address/netmask

Inhaltsverzeichnis

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung