Technaxx TX-28 Bedienungsanleitung

The user manuals in the following languages: English, German, French, Spanish, Italian,

Polish, Dutch and Czech are on the CD-ROM enclosed to the package contents.

Technaxx®

Easy Security Camera Set TX–28

User Manual

The Declaration of Conformity for this device is under the Internet link:

www.technaxx.de/ (in bottom bar “Konformitätserklärung”)

Before using the device the first time, read the user manual carefully.

Features

Digital wireless interference-free waterproof (IP65) camera set

100% Privacy & SD Recording

Has 4 channels, can support 4 cameras on one monitor (means simultaneous

display of 4 cameras on one monitor is possible)

Transmission range ≥200m in open range

Infrared night vision

High sensitivity microphone

Supports MicroSD cards up to 32GB

Record function with different recording modes (manual, time-scheduled,

motion-activated)

Motion Detection: Detect the moment to auto record

Mobile displayable on: iPhone / Android

Anytime sharp picture and good sound quality

Easy installation, Plug & Play

1. Front of the wireless receiver with 7” display

2. Side of the wireless receiver (Descriptions from up to down)

Wireless receiver OFF / ON switch

(= Power switch)

TF: MicroSD memory card slot

USB port: USB connecter for

wireless receiver software to to

update only

AV-OUT port: use AV cable to

connect with TV/LCD

DC 12V Input

3. Rear side of the wireless receiver

Speaker

Monitor stand

Antenna

4. Side of the wireless camera (Descriptions from up to down)

5. Front of the wireless camera

with the IR night lights

Antenna

Power

Connector

Pair code

Camera stand

6. Remote Control

Menu: Press Menu key to show Main Menu.

Cam: Press Camera key to change channels.

Screen: Press Screen key to show 4 video same

time, press it again, video auto to show one by one,

press it again to enlarge one of 4 video.

Rec: Press Video Record key to record a video,

press it again to stop recording.

Press OK key (round key in the middle) to confirm

the selection.

Press UP / DOWN / LEFT / RIGHT navigation key

(the keys with the arrows) to select the mode

7. Charging the Receiver

Plug the Micro USB cable* (* included) into the Micro USB slot of the receiver. Then

connect the USB port to the USB slot of a PC or an USB 12V/1A charging adapter*

(* included). Charging time is ~ 3–4 hours. While loading, the RED LED lights

continously. When the receiver is fully loaded, the RED LED turns off.

8. MAIN MENU

Press the Menu key to display the main menu, and the below picture is shown on the

wireless digital video receiver display with the different modes you can select.

Playback – Record – Select Camera – Contrast/Brightness

Recording schedule – Motion Detection – Settings – Exit

Connect the 5VDC power adapter to the camera, connect the 12V/1A DC power

adapter to the Receiver and turn on the receiver (has a built-in battery).

Press “Pair Code” at the wireless camera power connector to pair the camera to the

receiver. When the connection is established you see in the background of the Main

Menu the motion the camera is focused on.

8.1. Playback Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the “Playback

Mode”. Press OK key to enter it.

Attention: Playback mode can be selected only if a MicroSD

card is inserted! If files are saved in different folders, select the

file you want to playback.

Press OK key to enter and then select the file to play.

Press Menu key again to Exit.

8.2. Record Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the “Record

Mode”. Press OK key to enter it.

Then below settings are shown:

Manual Capture

Press UP or Down navigation

key to select “Manual

Capture”.

Press OK key to confirm.

Manual Capture

Now you see different methods to

record. Use the LEFT or RIGHT

navigation key to select: Manual,

Take 1 photo, Take 3 photos, Take 5

photos, 5s video, 10s video, 30s

video, 1 Min video.

Press OK button to confirm the

selection.

Select Exit with the UP/DOWN

navigation key to go back to the

Record Mode.

Loop recording

Press UP or Down navigation

key to select “Loop

Recording”.

Press OK key to confirm.

Loop recording

Use the LEFT or RIGHT

navigation key to select ON or

OFF.

Press OK button to confirm the

selection.

Select Exit with the UP/DOWN

navigation key to go back to

the Record Mode.

SD Format

Press UP or Down navigation

key to select “SD Format”.

Press OK key to confirm.

SD Format

Use the UP or DOWN

navigation key to select NO or

YES.

If select YES, it will format all

files on MicroSD card.

Press OK button to confirm the

selection.

SD Info

Press UP or Down navigation

key to select “SD Info”.

Press OK key to confirm.

SD Info

Then the SD Information is

shown.

Press OK key to go back to

Record Mode.

8.3. Select Camera Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the “Select

Camera Mode”. Press OK key to enter it.

Then below settings are shown:

8.4. Contrast / Brightness Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the

“Contrast/Bightness Mode”. Press OK key to enter it.

Then below settings are shown:

Select CAM

Press UP or Down navigation

key to select: CAM1, CAM2,

CAM3, CAM4, Quad view,

Exit

Press OK key to confirm the

selection.

Select Exit with the UP/DOWN

navigation key to go back to

the Main Menu.

Contrast / Brightness

Press UP or Down navigation

key to select “Contrast”.

With the LEFT or RIGHT

navigation key you can choose

between a value range from

0 – 9.

Press OK key to confirm the

selection.

Select Exit with the UP/DOWN

navigation key to go back to

the Main Menu.

8.5. Recording Schedule Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the “Recording

Schedule Mode”. Press OK key to enter it.

Then below settings are shown:

Contrast / Brightness

Press UP or Down navigation

key to select “Brightness”.

With the LEFT or RIGHT

navigation key you can choose

between a value range from

0– 9.

Press OK key to confirm the

selection.

Select Exit with the UP/DOWN

navigation key to go back to

the Main Menu.

Recording Schedule

Press UP or Down navigation

key to select “Enable”.

With the LEFT or RIGHT

navigation key you can select

ON or OFF.

If select ON, it will turn on auto

Recording Schedule Mode.

Press OK key to confirm the

selection.

Press UP or Down navigation key to select “Start Time”.

With the LEFT or RIGHT navigation key you can set the Recording Start Time.

Press OK key to confirm the setting.

Press UP or Down navigation key to select “End Time”.

With the LEFT or RIGHT navigation key you can set the Recording End Time.

Press OK key to confirm the setting.

Select Exit with the UP/DOWN navigation key to go back to the Main Menu.

8.6. Motion Detection Mode

Press Menu key to display the main menu.

Press LEFT or RIGHT navigation key to select the “Motion

Detection Mode”. Press OK key to enter it.

Then below settings are shown:

Motion Detection

Press UP or Down navigation

key to select “Enable”.

With the LEFT or RIGHT

navigation key you can select

ON or OFF.

If select ON, it will turn on auto

Motion Detection Mode.

Press OK key to confirm the

selection.

Motion Detection Icon

Press UP or Down navigation key to select “Sensitivity”. With the LEFT or RIGHT

navigation key you can select Hight/Stand/Low. Press OK key to confirm the

selection.

Press UP or Down navigation key to select “Capture”. With the LEFT or RIGHT

navigation key to select: Take 1 photo, Take 3 photos, Take 5 photos, 5s video,

10s video, 30s video, 1 Min video. Press OK key to confirm the setting.

Select Exit with the UP/DOWN navigation key to go back to the Main Menu.

Andere Handbücher für TX-28

Inhaltsverzeichnis

Sprachen:

Andere Technaxx Sicherheitskamera Handbücher

Technaxx

Technaxx TX-146 Bedienungsanleitung

Technaxx

Technaxx TX-145 Bedienungsanleitung

Technaxx

Technaxx TX-28 Bedienungsanleitung

Technaxx

Technaxx TX-108 Bedienungsanleitung

Technaxx

Technaxx TX-23 Bedienungsanleitung

Technaxx

Technaxx TX-09 Bedienungsanleitung

Technaxx

Technaxx TX-44+ Wild Cam Camouflage Bedienungsanleitung

Technaxx

Technaxx TX-190 Bedienungsanleitung

Technaxx

Technaxx TX-44 Wild Cam Bedienungsanleitung

Technaxx

Technaxx HD TX-24 Bedienungsanleitung

Technaxx

Technaxx TX-49 Bedienungsanleitung

Technaxx

Technaxx TX-75 Bedienungsanleitung

Technaxx

Technaxx TX-65 Bedienungsanleitung

Technaxx

Technaxx 4461 Bedienungsanleitung

Technaxx

Technaxx TX-83 Bedienungsanleitung

Technaxx

Technaxx TX-28 Bedienungsanleitung

Technaxx

Technaxx TX-128 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung