TechNexion TOUCAN TC-0710 SLIM HMI Bedienungsanleitung

TOUCAN TC-0710 SLIM HMI PRODUCT MANUAL

(TC-0710)

VER. 1.00

July 27, 2018

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 2of 26

REVISION HISTORY

Revision

Date

Originator

Notes

1.00

July 27, 2018

TechNexion

First public release

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 3of 26

TABLE OF CONTENTS

1. Introduction ...............................................................................................................................................4

1.1. General Care and Maintenance .........................................................................................................4

2. TC-0710 Product Overview.......................................................................................................................5

2.1. Functional Block Diagram ..................................................................................................................5

2.2. Dimensions.........................................................................................................................................6

2.3. Device Cut-out Dimensions For Mounting Though a Panel...............................................................7

2.4. External Connectors...........................................................................................................................8

2.5. Internal Board Connectors ...............................................................................................................10

3. External Connectors................................................................................................................................12

3.1. Gigabit Ethernet Interface.................................................................................................................12

3.2. Power Input Connector.....................................................................................................................12

3.3. Digital I/O Connector (GPIO)............................................................................................................13

3.4. USB Host Connector........................................................................................................................13

3.5. HDMI (High Definition Multi-Media Interface)...................................................................................13

3.6. CAN Bus Connector (CANBus)........................................................................................................14

3.7. Serial Port / MDB Connector (RS-XXX)...........................................................................................15

3.8. USB OTG Connector........................................................................................................................16

3.9. MicroSD Connector..........................................................................................................................17

3.10. S1 Button........................................................................................................................................17

3.11. RST Button.....................................................................................................................................17

3.12. Antenna Holes................................................................................................................................17

4. Internal Connectors and Expansion Options ..........................................................................................18

4.1. RTC Battery Connector....................................................................................................................18

4.2. Audio Connectors.............................................................................................................................19

4.3. Power Fuse ......................................................................................................................................19

4.4. S1 Button Boot Select Mode DIP Switch..........................................................................................19

5. Mounting..................................................................................................................................................20

5.1. VESA Mounting................................................................................................................................20

5.2. Rear Mounting and Mounting Clips Installation................................................................................21

5.3. Surface Mounting and O-ring Installation.........................................................................................22

6. Ordering Information...............................................................................................................................23

6.1. Custom Part Number Rule ...............................................................................................................23

6.2. Standard Package Contents ............................................................................................................24

7. Important Notice......................................................................................................................................25

8. DISCLAIMER ..........................................................................................................................................26

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 4of 26

1. Introduction

1.1. General Care and Maintenance

Your device is a product of superior design and craftsmanship and should be treated with care.

The following suggestions will help you.

•Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain

minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.

•Do not use or store the device in dusty or dirty areas. Its parts and electronic components can be

damaged.

•Do not store the device in hot areas. High temperatures can shorten the life of electronic devices,

damage batteries, and warp or melt certain plastics.

•Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

•Do not open the device while power is on. Otherwise electrical shock may result.

•Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and

fine mechanics.

•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

•Do not paint the device. Paint can clog the moving parts and prevent proper operation.

•Unauthorized modifications or attachments could damage the device and may violate regulations

governing radio devices.

These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is

not working properly, take it to the nearest authorized service facility for service.

Regulatory information

Disposal of Waste Equipment by Users in Private Household in the European Union

This symbol on the product or on its packaging indicates that this product must not be

disposed of with your other household waste. Instead, it is your responsibility to dispose

of your waste equipment by handing it over to a designated collection point for the

recycling of waste electrical and electronic equipment. The separate collection and

recycling of your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human health and the

environment. For more information about where you can drop off your waste equipment

for recycling, please contact your local city office, your household waste disposal service or the shop

where you purchased the product.

We hereby declare that the product is in compliance with the essential requirements and

other relevant provisions of European Directive 1999/5/EC (radio equipment and

telecommunications terminal equipment Directive).

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 5of 26

2. TC-0710 Product Overview

2.1. Functional Block Diagram

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 6of 26

2.2. Dimensions

The following figure shows the TC-0710 dimensions (unit: mm):

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 7of 26

2.3. Device Cut-out Dimensions For Mounting Though a Panel

The TC-0710 can be mounted on the front or the back of the panel. In order to mount it from the front, a

nominal rectangular cutout must be made in the panel. The following drawing shows the dimensions of

the cut-out area (unit: mm):

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 8of 26

2.4. External Connectors

The TC-0710 has a number of external connectors.

Rear view:

1 2 3 4 5 6 7

External Connectors:

No.

Description

No.

Description

LAN RJ45 and PoE connector

Serial Port (RS-XXX) connector

Power Input (10~30VDC) connector

MicroSD cardslot

GPIO connector

USB OTG connector

USB Host connector

S1 Boot Select button

HDMI connector

Reset button

CAN Bus (CANBus) connector

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 9of 26

Bottom view:

1 2 3 4 5 6 7

Right side view:

8 8 910 11

External Connectors:

No.

Description

No.

Description

LAN RJ45 and PoE connector

Serial Port (RS-XXX) connector

Power Input (10~30VDC) connector

MicroSD cardslot

GPIO connector

USB OTG connector

USB Host connector

S1 Boot Select button

HDMI connector

Reset button

CAN Bus (CANBus) connector

TC-0710 HARDWARE MANUAL –VER 1.00 –JUL 27 2018

Page 10 of 26

2.5. Internal Board Connectors

The TC-0710 has several connectors, switches and internal expansion options. It is necessary to remove

the EDM computing module to access several switches, headers and connectors.

Rear view (opened device) with the EDM computing module:

EDM Computing Module

Internal Connectors and Switches:

No.

Description

No.

Description

RTC Battery connector

USB (2 port) header

Mic in connector

USB (shared with touchpanel)

Line out connector

Power Fuse

SW1 DIP switch for RS-XXX Serial Port

Andere Handbücher für TOUCAN TC-0710 SLIM HMI

Inhaltsverzeichnis

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten