Technica Engineering BR_SPY_mini Bedienungsanleitung

Technica Engineering GmbH

Leopoldstr. 236

80807 München

Email: info@technica-engineering.de

Web: www.technica-engineering.de

User Manual

Version 0.6

May 2017

BroadR-Reach (100Base-T1) –Standard Ethernet

BR_SPY_mini

Page 2of 23

Page 3of 23

Index

1Feature List ................................................................................................................... 4

2Warranty and Safety Information ................................................................................... 5

3Pinning .......................................................................................................................... 6

3.1 Power and BroadR-Reach (100Base-T1) connector................................................ 7

3.2 SubD 9 Trigger Connector ...................................................................................... 8

3.3 RJ45 Ethernet connectors....................................................................................... 8

4Status LEDs and Pushbutton......................................................................................... 9

5Configuration................................................................................................................10

6Use Cases....................................................................................................................11

6.1 Dual Media Converter Mode (“0, 0”) .......................................................................11

6.2 Spy Mode Without Wrapper (“0, 1”)........................................................................12

6.3 Spy Mode With Wrapper (“1, 0”).............................................................................13

6.3.1 BRSPY mini LUA Dissector Installation Guide ................................................15

6.4 Frame Generator Mode (“1, 1”) ..............................................................................17

6.4.1 Frame Format .................................................................................................17

6.4.2 Status Reporter...............................................................................................19

7Trigger Functions..........................................................................................................21

8Frequently Asked Questions –FAQ..............................................................................22

9Contact.........................................................................................................................23

Page 4of 23

1 Feature List

The Technica Engineering BR_SPY_mini captures Automotive Ethernet Frames (BroadR-

Reach / 100Base-T1) directly on the line without influence of the original network. The data

Frames can be enhanced with additional information: the exact timestamp and the bus port

the data was originally sent on. All data can be recorded on a PC or datalogger for detailed

offline analysis using standard RJ45 cables.

Timestamps are in 0.04 μs resolution and synchronous to all connected lines.

BR_SPY_mini can provide a Trigger Generator function at an extra cost, and should be or-

dered in advance before buying the product to be programmed properly at Technica Engi-

neering side before delivery.

Features:

4 Ports BroadR-Reach (100Base-T1) Ethernet 100 MBit/s Fullduplex on a single un-

shielded twisted pair.

2 Ports Gigabit Ethernet 100/1000 BaseTX

6x Digital Trigger Input

6x Digital Trigger Output

Automotive Tyco MQS Connectors for BroadR-Reach (100Base-T1) and Power Sup-

ply

Robust stainless-steel case

DIP Switches for easy configuration

Selection of multiple UseCases:

o Two independent MediaConverters

o 2x SPY for listening on a BroadR-Reach (100Base-T1) Channel (with and without

hardware timestamp)

o A combination of one MediaConverter and one SPY

Power requirement: 8 to 16 Volt DC (nominal 12 Volt DC)

Power consumption: 4 to 7 Watt

Size: 110 x 108 x 28 mm

Weight: 0,4 kg

International Protection: IP 2 0

Operating Temperature: -20 to +80 °Celsius

Page 5of 23

2 Warranty and Safety Information

Before operating the device, read this manual thoroughly and retain it for

your reference.

Use the device only as described in this manual.

Use only in dry conditions.

Do not apply power to a damaged device.

Do not open the device. Otherwise warranty will be lost.

This device is designed for engineering purpose only.

Special care has to be taken for operation.

Do not use this device in a series production car.

As this device is likely to be used under rough conditions, warranty is limited

to 1 year.

Manufacturer liability for damage caused by using the device is excluded.

Page 6of 23

3 Pinning

The pinning of the ECU connectors is listed on the label on top of the device, detail infor-

mation see below.

Page 7of 23

3.1 Power and BroadR-Reach (100Base-T1) connector

Connector color: Black

Power supply for the device is supplied by Pin 1 (12 Volt) and Pin 10 (Ground).

Warning: If you apply a voltage higher than 18 Volt, the device will be damaged!

The Tyco Electronics (TE) Micro Quad Lock System (MQS) is used.

Tyco, MQS Abdeckkappe, 2x9 Pol, black Part Number 1-967416-1

alternatively Part Number 1-1355350-1

Tyco, MQS Buchsengehäuse, 2x9 Pol Part Number 965778-1

alternatively Part Number 962108-2

Tyco crimp contact Part Number 928999-1

Note: You can use the official Tyco tool for these crimp contacts. A cheap variant is the

crimp tool for “PSK” contacts.

Function

Battery +12 Volt Input

Power Ground

n.c.

BroadR-Reach Port 1A, Negative

BroadR-Reach Port 1B, Negative

BroadR-Reach Port 1A , Positive

BroadR-Reach Port 1B , Positive

n.c.

BroadR-Reach Port 2A, Negative

BroadR-Reach Port 2B, Negative

BroadR-Reach Port 2A , Positive

BroadR-Reach Port 2B , Positive

Table 1: Pinning information Tyco MQS connector

Page 8of 23

3.2 SubD 9 Trigger Connector

Standard SubD 9 Pos. female connector.

This connector is used for digital input and output trigger functions.

Function

Digital Trigger Input/Output 1

Digital Trigger Input/Output 2

Signal Ground Reference

Digital Trigger Input/Output 3

Digital Trigger Input/Output 4

Digital Trigger Input/Output 5

Digital Trigger Input/Output 6

Table 2: Pinning information Sub-D connector

Digital Trigger Output:

Digital Trigger Output Voltage is 3.3 Volt Level with a 4.7 KOhm Pull-up resistor.

Active LOW. Drive Strength 20 mA.

Digital Trigger Input:

Digital Trigger Voltage is 3.3 Volt Level with a 4.7 KOhm Pull-up resistor.

Active LOW

3.3 RJ45 Ethernet connectors

There are two RJ45 Standard Ethernet connectors of the front side for Gigabit Ethernet.

Depending on the selected Use Case they are forced to be 100 Mbit/s or Gigabit Ports.

Page 9of 23

4 Status LEDs and Pushbutton

The BR SPY mini has several status LEDs at the front side of the case.

The “Host” LED1 must be ON, and “Host” LED2 must toggle slowly (approx. 1 sec).

If “Host” LED2 does not toggle or “Host” LED1 is OFF, an error has been detected by the

Host.

The “FPGA” LED1 and LED2 show the setting of the DIP switches 3 and 4. When one of

these DIP switches is ON, the corresponding LED is ON.

Note: For the DIP switches: Switch ON Switch set to “up”position, when the device

stands flat on the table.

Switch OFF Switch set to “down”position, when the device

stands flat on the table.

The 4 BR Link LEDs 1A to 2B monitor the link status of the ports BR1A to BR2B. The LEDs

are lit when there is BroadR-Reach (100Base-T1) link detected. These LEDs are updated in

real time.

Note: There is an issue when P/N of the bus are swapped. The LED may be on in this case

on BroadR-Reach (100Base-T1) slave side, but there will be no data transmission possible.

Please ensure proper electric connection (positive with positive and vice versa).

The built-in LEDs in RJ45 connector shows the status of the gigabit ports. The left (orange

LED) is lit by a link-up. The right (yellow) will blink on data traffic.

Page 10 of 23

5 Configuration

The BRSPY mini is configured by 8 DIP Switches on the front of the device.

DIP Switch 1: ON = BroadR-Reach Port 1A is set to Master Port 1B to slave.

OFF = BroadR-Reach Port 1B is set to Master Port 1A to slave.

DIP Switch 2: ON = BroadR-Reach Port 2A is set to Master Port 2B to slave.

OFF = BroadR-Reach Port 2B is set to Master Port 2A to slave.

DIP Switch 3 to 4: Use Case Selection.

DIP Switch 3 OFF, DIP Switch 4 OFF Dual Media Converter Mode

DIP Switch 3 OFF, DIP Switch 4 ON SPY Mode Without Wrapper

DIP Switch 3 ON, DIP Switch 4 OFF SPY Mode With Wrapper

DIP Switch 3 ON, DIP Switch 4 ON Frame Generator

DIP Switch 5 to 8: Frame Generator speed, burst and packet size selection

Note: DIP Switch 1 and DIP Switch 2 will configure Port 1A and Port 2A as Master or Slave

in the Media Converter mode. In this mode, ports 1B and 2B are not working.

Same is valid for port 1A Master/Slave setting in the Combination Mode and port 1B is not

working.

Inhaltsverzeichnis

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

Pickering

Pickering 40-613 Bedienungsanleitung

Pickering

Pickering 40-667C Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung