TechniSat TechniPlayer LP 300 Bedienungsanleitung

Instruction Manual

TECHNIPLAYER LP 300

Preface

This operating manual outlines

•proper and

•safe

Use of your record player, referred to below as "record

player" or "unit".

Take note of the Audacity software on the CD and the

instructions for using the USB terminal on p. 20.

Target group of this operating manual

This operating manual is intended for everyone who

•sets up,

•operates,

•cleans

•or disposes of the unit.

All brand and product names are trademarks or registered trademarks

of the respective manufacturer.

Layout features of this operating

manual

Various items in the operating manual are provided with

set layout features. This enables you to determine easily

whether the item is

normal text,

•a list or

Šsteps to be carried out.

Install the supplied Audacity® software on a PC

or MAC before connecting and operating the

unit.

An alternative program, for example, is the "Free

MP3 Sound Recorder" on the CD.

Please read these instructions for use carefully and keep

them for later use, be sure to make them accessible to

other users and observe the information they contain.

Contents

Important notes for users in the U.K................................4

Mains plug ...................................................................... 4

How to connect a plug .................................................... 4

Safety and setting up the record player ..................... 5

Safety.............................................................................. 5

Setup .............................................................................. 6

Description of the record player ................................. 8

Included in delivery ......................................................... 8

Special characteristics .................................................... 8

The front of the unit......................................................... 9

How to prepare the record player for operation ...... 10

Turntable....................................................................... 10

Turntable mat................................................................ 10

Spindle adapter............................................................. 10

Installing the tone arm head ......................................... 10

Tone arm ...................................................................... 11

Attaching the counterweight ......................................... 11

Adjusting the stylus force.............................................. 11

Anti-skating control ....................................................... 12

The stylus illuminator .................................................... 13

The dust cover .............................................................. 13

Adjustable feet .............................................................. 14

Connecting the record player.....................................15

Connection to the amplifier............................................16

Connection to the computer ..........................................16

Mains connection...........................................................16

How to set the PHONO/LINE switch .............................16

Removing/attaching the stylus protection cap...............17

Playing a record ..........................................................18

Procedure......................................................................18

Interrupting playback .....................................................18

Playing back a 45 rpm record with large centre hole ....19

Speed fine adjustment PITCH ADJ. ..............................19

Before establishing the USB connection ..................20

System requirements ....................................................20

How to digitalise your music......................................21

Installing the software....................................................21

Connecting the record player ........................................21

Setting up the software..................................................21

Recording and saving music .........................................22

How to clean the record player ..................................23

Cleaning the stylus and the record ................................23

Replacing the stylus ......................................................23

Installing another pickup system.........................................24

Troubleshooting ..........................................................25

Technical specifications .............................................26

Disposal instructions ..................................................27

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug.

To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fix new fuse which should be a BS1362 3 Amp,

A.S.T.A. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it

should be cut off and an appropriate plug fitted in its

place. If the mains plug contains a fuse, this should have

a value of 3 Amp. If a plug without a fuse is used, the

fuse at the distribution board should not be greater than

5 Amp.

Note:

The severed plug must be disposed of to avoid a

possible shock hazard should it be inserted into a 13

Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the

following code:

blue = neutral (N), brown = live (L).

•As these colours may not correspond with the colour

markings identifying the terminals in your plug,

proceed as follows:

•Connect the blue wire to the terminal marked N

or coloured black.

•Connect the brown wire to the terminal marked L

or coloured red.

•Do not connect either wire to the earth terminal in the

plug, marked E (or e) or coloured green (or green

and yellow).

Before replacing the plug cover, make certain that the

cord grip is clamped over the sheath of the lead - not

simply over the two wires.

Recording and playback of material may require consent.

See Copyright Act 1956 and The Performer’s Protection

Acts 1958 to 1972.

Safety and setting up the record player

Safety and setting up the record

player

Please read through all of the safety instructions carefully

and keep them for questions that may arise later. Always

observe all warnings and instructions in this operating

manual and on the rear of the unit.

Safety

Caution!

•The unit should only be connected to a mains

voltage supply of 230 V~, 50 Hz. Never try to

operate the unit with a different voltage.

•The mains plug should only be connected after

installation has been completed according to the

instructions.

•If the mains plug is defective or if the unit exhibits

other signs of damage, it should not be used.

•When unplugging the plug from the socket pull on

the plug itself, not on the cable.

•Prevent the unit from coming into contact with water

or moisture.

•In order to avoid fire hazards and the risk of electric

shock do not expose the unit to rain or moisture.

•Do not operate the unit in the vicinity of bathtubs,

swimming pools or spraying water.

•Do not place any containers which contain a liquid

on the unit, such as a flower vase. These could fall

over and the spilled liquid could lead to severe

damage or the risk of electric shock.

•If foreign objects or liquid get into the unit,

immediately pull the mains plug from the socket.

Have the unit checked by qualified technicians

before you operate it again. Otherwise you are at

risk of receiving an electric shock!

•Do not open the housing. Otherwise you are at risk

of receiving an electric shock!

•Never attempt to repair a defective unit yourself.

Always contact one of our customer service

locations.

•Never open the unit under any circumstances - this

should only be undertaken by a specialist.

•Foreign material, e.g. needles, coins, etc., should not

be allowed to enter the unit.

•Do not touch the contacts located on the rear of the

unit with metal objects or your fingers. This could

result in a short circuit.

•No open flames, such as burning candles, are

permitted to sit on the unit.

Safety and setting up the record player

•Never let children use this unit unattended.

•Always leave maintenance tasks to a qualified

technician. Otherwise you put yourself and others in

danger.

•The unit remains connected to the mains even when

it is switched off in the standby mode. Remove the

mains plug from the socket if you do not intend to

use the unit for a prolonged period. Pull only on the

plug itself, not on the cable.

•Do not listen to music or the radio at too high a

volume. This can lead to permanent hearing

damage.

•This unit is not intended for use by persons

(including children) with physical, sensory or mental

impairments or those who do not know how to use it

due to a lack of experience or knowledge, unless

they are supervised by a person responsible for their

safety or have received instructions from them on

how to use the unit.

•Children have to be supervised to ensure that they

do not play with the unit.

•Modifying the unit is prohibited.

•Damaged units or accessories must no longer be

used.

Setup

•The record player must be set up only on a sturdy

horizontal, vibration-free surface.

•Do not set up the unit in the vicinity of heat sources,

such as radiators. Avoid direct sunlight and

excessively dusty places.

•Please note that the feet on the unit could possibly

leave marks on certain furniture surfaces. Use a

protective layer between your furniture and the unit.

•You should only operate the unit when it is

positioned horizontally.

•Do not place any heavy objects on the unit.

•Do not use the unit outdoors!

Safety and setting up the record player

•The unit should not be placed in an area with high

humidity levels, e.g. in a kitchen or sauna, as

condensation can cause damage to the unit. The

unit is intended for use in a dry and temperate

environment, and must be kept away from dripping

or splashing water.

•Keep the unit away from devices that produce strong

magnet fields.

•If you move the unit from a cold environment into a

warm environment, moisture may develop inside the

unit. After moving the unit from a cold to a warm

environment therefore, wait around an hour before

starting to use it.

•Lay the mains cable in such a way that no one can

trip over it.

•Make sure the mains cable or plug is always easily

accessible, so that the unit can be disconnected

quickly from the power supply! This socket should be

as close to the unit as possible.

•Fully insert the mains plug into the socket.

•Use a suitable, easily accessible mains connection

and avoid using multiple sockets!

•Do not touch the mains plug with wet hands—risk of

electric shock!

•In the event of malfunctions or smoke and odour

coming from the housing remove the mains plug

from the socket immediately!

•Before a thunderstorm breaks, pull the mains plug.

•If the unit is not going to be used for a prolonged

period, e.g. in the event of a long trip, remove the

mains plug from the socket.

•Listening to music at too high a volume, especially

via headphones, can result in hearing damage.

•Do not use any other USB unit for connecting to the

USB port. The USB port is only for connecting

directly to a computer!

Intended use

The unit is designed for playing records.

Description of the record player

Included in delivery

ŠRemove the unit and all accessory parts from the

packaging.

Note: The small parts are in the sides of the polystyrene

packaging!

Keep the box and the packing material so that you can

repack the unit securely for any later transport.

Please ensure that all of the accessory parts in the

following list are present:

•The record player,

•Turntable,

•Pickup system with stylus,

•Counterweight,

•Turntable mat

•Dust cover with 2 hinges

•Spindle adapter (for 7" EPs),

•Software CD

•USB and audio connection cables,

•This operating manual.

Special characteristics

•This unit allows you to: play records for 33 and 45

rpm.

•The unit is suitable for scratch playing.

•The unit has a direct-drive motor with quick start and

stop function (< 1s).

•The record player has an integrated

equaliser/preamplifier and can be connected to a

phono input as well as an audio input (AUX-In).

•Using the USB terminal and the Audacity software,

you can transfer your records to your computer and

digitalise them.

Have a look at the provided CD. It has the

digitalisation software from Audacity® and an

extensive description of the software (getting

started, use).

Install the Audacity® software on a PC or MAC

before connecting and operating the unit.

Description of the record player

The front of the unit

Holder for spindle adapter (for 7" EPs)

Stroboscope display, 4-row

Turntable spindle

Stroboscope lamp

POWER ON/OFF: On/off switch

START/STOP: Start/stop button

Headshell

Ring nut for headshell

Tone arm

SPEED 33: Speed button for LPs

SPEED 45: Speed button for singles

PITCH ADJ.: Slider for pitch adjustment

(+10% to -10%)

Lift lever

Tone arm rest with clip

Anti-skating control

Counterweight

Holder for extra stylus

Scale for counterweight

Turntable with antistatic felt mat

USB port

PHONO/LINE switch

Outputs right/left for audio connection, cinch

Stylus illuminator

How to prepare the record player for operation

How to prepare the record player

for operation

ŠBefore assembly, make sure the accessories are

complete.

ŠAssemble the dust cover at the very end, to make it

more convenient for assembling and adjusting the

system!

ŠPut the record player on a stable, vibration-free and

horizontal surface.

ŠPlace the record player as far away as possible from

the loudspeakers and keep it isolated from the

sound they produce, to minimise vibrations.

Turntable

ŠCarefully set the turntable onto the turntable spindle 3.

Turntable mat

ŠPut the turntable mat (antistatic felt mat) on the

turntable.

Spindle adapter

The spindle adapter is required, for example, for singles

without their own plastic spindle adapter. When the

spindle adapter is not in use, you can store it in the

designated area 1.

Installing the tone arm head

ŠInstall the tone arm head 1 on the tone arm shaft 3 as

shown.

1 3

ŠSecure the tone arm head on the tone arm by

turning the ring nut 2 as shown, while holding the

tone arm head horizontal.

Inhaltsverzeichnis

Andere TechniSat Drehscheibe Handbücher

TechniSat

TechniSat TECHNIPLAYER LP 200 Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung