technoswitch CR035WB Bedienungsanleitung
WALL MOUNTED WEEKLY TOUCH PROGRAMMABLE THERMOSTAT - WIFI
02
03
Decrease
KEYS LEGEND
DISPLAY LEGEND
Menu
Increase
Confirm
Scrolls the next icon
ON/OFF - Manual/Automatic
Temperature levels
Days of week
Current time (Clock)
Energy consumption savings indicator
Set temperature / Humidity
Set temperature thresholds
WiFi
Cooling mode
Heating mode
Ambient Temperature
Automatic Mode
Set temperature levels
Statistics
COUNT-DOWN
COMMAND AND INDICATIONS
04
Manual Mode
Frost protection
Off
21.
22.
23.
24. Relative humidity
Note: when the programmable thermostat is in Stand-by, press to start the backlight. Now it can be set.
05
1. Installation
page
2. Factory Setting
3. On / Off
4. Set Day And Time
5. Daily Programming Of Temperatures
6. Lock Setting
7. Reset
7
9
9
10
10
11
11
1. Configuration
2. On / Off
3. Automatic / Manual Mode
4. Automatic / Manual Mode
5. Delete Program
6. Language Setting
12
13
13
15
17
18
INDEX
APP QUICK GUIDE
06
The device must be positioned about 1.5 meters above the floor, avoiding heat sources, windows and doors.
It must be installed on the wall or on recessed boxes with 2 or 3 modules, in dry places.
To install the programmable thermostat it is necessary:
• Unhook the base from the thermostat. • Fix the base to the wall. • Connect the external temperature probe.• Hook the base to the wall. Fig.1A e 2AFig.1B e 2BFig.3AFig.4A07
INSTALLATION
Connect the load to the terminals following the wiring diagram. WIRING DIAGRAM
ASSEMBLY INSTRUCTION
1
Fig.2AFig.3AFig.4AFig.1A
Pressare
Sollevare
1.0
08
WIRING DIAGRAM
Fig. 1B
Fig. 2B
PROBE
PROBE
RELE’
RELE’
PUMP VALVE
MOTORIZED
230 Vac
230 Vac
Open
MClosed
NC
NA
C
NC
NA
C
BOILER
09
For faster use, the programmable thermostat is supplied with set programs:
• Heating program. Temperature levels: (T1) = 14°C (T2)= 18°C (T3) = 22°C • Cooling Program. Temperature levels: (T1) = 24°C (T2) = 26°C (T3) = 28°C• Frost protection function: + 5 ° C settable, active only in heating mode. • Set temperature for MANUAL mode: +22°C.Press for 3 seconds.
FACTORY SETTING2.0
ON / OFF3.0
10
Press the icons in sequence : the clock flashes confirm with use or to set
hour/minutes confirming with , the day value (Monday) flashes press and select the desired
day that will start to flash confirm with .
It can customize the temperature levels at 30 minute intervals.
Press the icons in sequence : up to position on pressing , the day value flashes
confirm with use or to set the desired temperature range at that time press to move on the
next half hour and choose the desired temperature range and continue in the same way until you reach 11:30 pm
pressing , the days and flash alternately. Now you can:
a) Copy the program from Monday to Tuesday pressing ;
b) Set the Tuesday program pressing and confirm with .
Repeat the same steps to copy/set the other days.
SET DAY AND TIME4.0
DAILY PROGRAMMING OF TEMPERATURES5.0
Inhaltsverzeichnis
Andere technoswitch Thermostat Handbücher
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
