ENGLISH
ELECTRONIC STABILIZER 1 User’s manual
User’s Manual - English
Safety Warnings
Read this manual carefully and completely before installing and using the TECNOWARE Electronic
Stabilizer, which, from here after, will also be referred to as AVR
This manual should be kept close to the AVR and read before the AVR is installed and used
The AVR must be used only by properly trained personnel To ensure correct and safe operations, it is
necessary that operators and maintenance personnel observe the general safety Standards as well as the
specific instructions included in this manual
Risk of electric shock: do not remove the cover The AVR contains internal parts which are at a high
Voltage and are potentially dangerous, capable of causing injury or death by electric shock
The electric installation has to be done by qualified personnel Follow all the Safety Standards (CEI
Standards in Italy or IEEE elsewhere) for the Input/Output connections and for the right section of
Input/Output cables
There are no internal parts in the AVR which are user serviceable Any repair or maintenance work must
be performed exclusively by qualified technical personnel authorized by TECNOWARE TECNOWARE
declines any responsibility if this warning is disregarded
It is compulsory to ground the AVR according to Safety Standards
Risk of electric shock at the Output lines when the AVR is ON or in Bypass Mode
Risk of electric shock at the Output lines while the unit is connected to the AC utility line
We recommend to use a dedicate AC Input/Output power line for the AVR
Do not obstruct ventilation slots or holes and do not rest any object on top of the AVR
Do not insert objects or pour liquids in the ventilation holes
Install the AVR indoors, in a protected, clean and moisture-free environment
Do not expose to the direct sun light
Do not keep liquids, flammable gases or corrosive substances near the AVR
