TECshow ION 740z Bedienungsanleitung

P. 1

| Tecshow ION 740z

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

I O N 74 0z

Moving head powered by 7 x 4-in-1

OSRAM® 40W LEDs

P. 2

Tecshow ION 740z |

ION 740z

Moving head powered by 7 x 4-in-1 OSRAM® 40W LEDs

ION 740z is a versatile moving head powered by 7

x 4-in-1 OSRAM® 40W LEDs with a variable zoom that

goes from 4º to 36º. Versatility and power output get

new meanings thanks to the enormous action ca-

pacity brought by its beam angle variation, the pixel

by pixel control and it’s outstanding lighting perfor-

mance, with 43,000 lux @ 15 . (4º). This moving head

is equipped with quad-color LEDs, enabling a smooth

RGBW mix with no multicolor shadows and assuring a

real long life performance. Ion 740Z comes also with

preset programs on 2700K, 3200K, 4200K, 5600K and

8000K color temperatures and it’s RDM-compatible

allowing the user to monitor and address the unit re-

motely.

Specications

Source & Optics

• Light Source: 7 x 4-in-1 OSRAM® 40W LEDs

• LEDs life: 60,000 hours

• Beam angle: 4° to 36°

Photometric data

• Luminous ux: 7000 lumen

• 4º beam angle: 43000 lux @ 3m (10 .)

• 36º beam angle: 2400 lux @ 3m (10 .)

Eects & Functions

• Pixel by Pixel control

• Dimmer: Full range 0-100%

• Strobe eect

• Quad-color LED technology: Smooth RGBW mix

with no multi colored shadows

• Vivid, saturated and uniform colors

• Color temperature presets: 2700K, 3200K,

4200K, 5600K & 8000K

Control

• DMX Channels: 19/21/22/51

• Advanced RDM Function

• Indicated temperature for base, arm & lamp

• IC backup communication

• RDM read voltage, current power consump-

tion of the lamp

• Soware update vía DMX

• Fan speed based on temperature

Movement

• Pan: 540° / 630º

• Tilt: 265°

• 3-phase motor

• 16-bit resolution

• Auto repositioning

Physical

• DMX Connectors: 2 XLR connectors (XLR-3 In/

Out) & 2 RJ45 connectors (Ethernet In/Out)

• Power supply connectors: PowerCON® In/Out

• 2.4 inches LCD graphi

• c display

• Dimensions: 324x250x456 mm. / 12.7x9.8x17.9

in.

• Weight: 12 Kg. / 26.4 Lbs

• Dimensions: 264.5x168x368 mm. /

10.4x6.6x14.4 in.

• Weight: 5.1 Kg. / 11 Lbs.

1. OVERVIEW

English version

P. 3

| Tecshow ION 740z

Before unpack the xture, pls make sure that the packing is

in good condition, following items will be found in the box:

• The xture

• This users guide

• 3m DMX cable

• 1.5m power cable with powercon

• Omega bracket for hanging installation

• Safety chain

English version

P. 4

Tecshow ION 740z |

2. DESCRIPTION OF THE DEVICE

English version

1. Project lens

2. Head

3. Arm

4. Base

5. Display

6. Foot stand

7. Operation button

8. Handel

9. Wireless indicator

10. Mic

11. Le button

12. Battery indicator

13. Up button

14. Down button

15. Enter button

16. Right button

17. Ethernet out

18. 5-pin DMX in

19. Ethernet in

20. 5-pin DMX out

21. Powercon in

22. Fuse

910 11 12

21 22

P. 5

| Tecshow ION 740z

Before operate this unit, please carefully read this users guide and keep if needed in future. It’s

necessary to respect following rules.

The disposal of the device aer lifecycle could damage the environment, need to take it to spe-

cial company for recycling or return to authorized dealer.

The products referred to in this manual conform to the European Community Directives and

are therefore marked with CE logo.

Keep this device away from children and unauthorized users, the manufacturer will not take

responsibility for the damage due to any disregard of the information provided in this manual

and wrong operation.

Before operate the device, pls make sure the xture is in good housing, ensure pan and tilt can

rotate in its complete range.

Please make sure minimal 0.5m distance need to kept between the xture to any ammable

material.

The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any other

wrong power. Disconnect the device from main power before open the shield or maintenance.

The device is designed only for indoor usage, pls keep it away from moisture. Do not expose

the device under the sun or directly to any other lighting source.

Never look directly into the projecting lens when the xture is power on, the light may trigger

epileptic seizures in photosensitive persons or persons with epilepsy. Especially at beam eect,

extreme caution and observance of these safety instructions is mandatory.

Don’t put or install the device on a surface that subject to vibration or bumps.

Ta=45°c The device is supposed to work in the temperate range -15° C and +45° C, do not use the device

when the temperate exceed this range.

The lens, shield need to be replaced when obviously broken, never use the device when the

shield is not completed closed.

Safety I class device, need to be earth connected.

When the xture is hanged overhead, the safety rope must be xed to the bottom of the device

to the appropriate xing point.

Always carry the device by the handles, do not take the head or arm directly for transportation.

3. SAFETY AND MAINTENANCE INFORMATION

English version

0,5m

Safety Info

P. 6

Tecshow ION 740z |

• Operation only allowed to qualied person,

damages due to unprofessional operation or re-

move of any parts inside will not be considered

in warranty service. There are no serviceable

parts inside the device or package, service only

leaves to authorized dealers.

• Never allow the optical components contact

with oil, fat or any other liquid.

• A regular clearance of the device is needed for

long-term usage, this is very helpful to maintain

the lifetime and brightness need to use a so

and lint-free cloth to clean the optical system,

fan and air owing tunnel.

Trouble Shooting

Maintenance

English version

Problems Possible reasons Checking or solutions

Device not power up Powercon or power cable damaged

Faulty power supply

Change a good power cable to try

Replace new power supply

Pan/Tilt error or vibrate

Faulty Pan/Tilt PCB

Faulty opto sensor

Cable loosen

Replace PT001 PCB

Replace opto sensor OP001

Check the cable connect to OP001

LED o

Temperature protection

Fan not working

Faulty LED

Dimmer and strobe set at 0

Faulty power supply

Check the temperature from menu

Check the fan speed info from menu

Replace new LED

Set dimmer and strobe channel at 255

Replace new power supply

Device not response

to DMX

Faulty communication IC

Faulty display PCB

Wrong DMX addressing

Faulty DMX cable

Replace the IC with back-up one in the

display PCB

Replace new display PCB

Check the address and setting

Change to a good DMX cable

P. 7

| Tecshow ION 740z

Need to replace with same type and rating, which

originally installed in the device.

• Step One: Unplug power cable from main

power.

• Step Two: Unscrew the fuse holder out of the

housing with a screwdriver.

• The device could be either put on a

solid and even Surface, or mounted

upside down or sideways like le

picture.

• The mounting place must be suicient

stable and be able to support a weight

of 10 times of the unit’s weight. When

the xture is hanged, always addition-

ally secure the device with the safety

chain, fasten the safety rope at a suit-

able position so that the maximum fall

of the projector will be 20 cm.

• Step Three: Remove the broken fuse and re-

place with an exact same type of new fuse.

• Step Four: Insert the fuse holder back to the

housing and screw tight and reconnect power.

Replacement of the fuse

English version

4. INSTALLATION

P. 8

Tecshow ION 740z |

English version

• Step one: Installation the clamp onto the

omega bracket;

• Step two: Install the clamp and bracket on the

bottom of panel, fasten the quick-locks;

• Step three: Install the whole device onto ap-

Meaning of the icon in menu

propriate truss and fasten the clamps, tight the

safety rope with the truss or other xing point

at a suitable position that drop down distance

not exceed 20 cm.

How to do mounting installation

5. CONTROL MENU

CONNECT LIGHT INFOMATION SET PROGRAM

P. 9

| Tecshow ION 740z

English version

Default setting shadowed. mark with 1can be basic reloaded, 2 be program reloaded, 3 can be private

reloaded.

Menu tree

Connect

DMX Address 1XXX DMX address setting

Wireless 1(Wireless Module) Wireless Enabled

Artnet 1(Only Artnet Module) Artnet Enabled

Light

Max Temperature 180~139°C /176~282°F Lamp o if temperature continu-

ously over for 2minutes

Lamp Adjust 1PAN Adjust value of channel

Information

Time Info. Current XXXX (Hours)

Fixture Life XXXX (Hours)

Lamp Life XXXX (Hours)

Fixture boot time

Fixture total run time

Lamp total run time

Lamp Info. Voltage

Current

Power

HID Lamp Information

Temperature Near Lamp Temp (depends on

xture)

Temperature Sensors

Fans Speed Near Lamp Fan (depends on

xture)

Fan speed Sensors

Channel Value PAN Display value of channel

Error Message Pan, Tilt Error channels

Fixture Model xxxxxxxxxxxx Display model brand and model

Soware Ver 1U01 V1.0.00 Version of each IC

Set

Reset All

Pan&Tilt

Reset all

Reset Pan&Tilt

Movment Pan Reverse 1

Tilt Reverse 1

Pan Degree 1

Encoders 1

Pan/Tilt Mode 1

ON/OFF

630/540

ON/OFF

Stand/Smooth

Pan Reverse

Tilt Reverse

Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic Sens. 3

No Signal 1

Temperature. C/F

Fans Mode 1

Hibernation 1

Backlight 1

Flip Display 1

Display Bright 3

Brand Show 1

Key Lock 1

Language 3

0~99%,60%

Close/Hold/Auto/

Music

Fahrenheit /Celsius

Auto Speed /High

Speed

OFF, 01M~99M, 15M

02~60m 02m

ON/OFF

00~31 10

ON/OFF

En/Fr/Sp/简/简

Sensitivity of Mic

Mode when no signal

Temperature at °C/°F

Fans mode

Sleeping mode

Show backlight time

Display 180°reverse

Display Brightness

Show brand or not

Key lock on/o

Language Select

Fixture Set Theater Mode ON/OFF Theater Mode

Users User Mode 1Standard

Extended

User

Standard mode

Extended mode

User program mode

Edit User 3Max Channel = XX

PAN = CH01

Edit users mode

Calibration 3-Password-

Pan

=XXX

Password: 050

Calibrate channel value

Fixture ID 3Name

-Password-

PID Code

Name

Password: 050

Set PID of RDM

Wireless Set 1

(Wireless Module)

DMX On Cable

Reset Connect

ON/OFF

DMX Send Out

Reset Connect

Ethernet Set 3

(Only Artnet Mod-

ule)

IP Address

IP Mask

Universe

DMX On Cable

2.x.x.x

255.0.0.0

ON/OFF

Ethernet Set

(Only Artnet Module)

Reload Default Basic Reload(1)

Program Reload(2)

---Password---

Private Reload(3)

All Reload

Update Fixture

ON/OFF

XXX

ON/OFF

Basic Reload

Program Reload

Password: 050

Private Reload

All Reload

Soware upgrade

P. 9

English version | Tecshow ION 740z

P. 1 0

Tecshow ION 740z |

English version

Set Reset All

Pan&Tilt

Reset all

Reset Pan&Tilt

Movment Pan Reverse 1

Tilt Reverse 1

Pan Degree 1

Encoders 1

Pan/Tilt Mode 1

ON/OFF

630/540

ON/OFF

Stand/Smooth

Pan Reverse

Tilt Reverse

Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic Sens. 3

No Signal 1

Temperature. C/F 1

Fans Mode 1

Hibernation 1

Backlight 1

Flip Display 1

Display Bright 3

Brand Show 1

Key Lock 1

Language 3

0~99%,60%

Close/Hold/Auto/

Music

Fahrenheit /Celsius

Auto Speed /High

Speed

OFF, 01M~99M, 15M

02~60m 02m

ON/OFF

00~31 10

ON/OFF

En/Fr/Sp/简/简

Sensitivity of Mic

Mode when no signal

Temperature at °C/°F

Fans mode

Sleeping mode

Show backlight time

Display 180°reverse

Display Brightness

Show brand or not

Key lock on/o

Language Select

Fixture Set Theater Mode ON/OFF Theater Mode

Users User Mode 1Standard

Extended

User

Standard mode

Extended mode

User program mode

Edit User 3Max Channel = XX

PAN = CH01

Edit users mode

Calibration 3-Password-

Pan

=XXX

Password: 050

Calibrate channel value

Fixture ID 3Name

-Password-

PID Code

Name

Password: 050

Set PID of RDM

Wireless Set 1

(Wireless Module)

DMX On Cable

Reset Connect

ON/OFF

DMX Send Out

Reset Connect

Ethernet Set 3

(Only Artnet Mod-

ule)

IP Address

IP Mask

Universe

DMX On Cable

2.x.x.x

255.0.0.0

ON/OFF

Ethernet Set

(Only Artnet Module)

Reload Default Basic Reload(1)

Program Reload(2)

---Password---

Private Reload(3)

All Reload

Update Fixture

ON/OFF

XXX

ON/OFF

Basic Reload

Program Reload

Password: 050

Private Reload

All Reload

Soware upgrade

Inhaltsverzeichnis

Sprachen:

Andere TECshow Leuchte Handbücher

TECshow

TECshow octobeam Bedienungsanleitung

TECshow

TECshow ALFIE WASH Bedienungsanleitung

TECshow

TECshow COSMO QUAD 6 Bedienungsanleitung

TECshow

TECshow nebula 18 Bedienungsanleitung

TECshow

TECshow BEAMER Bedienungsanleitung

TECshow

TECshow Alfie Bedienungsanleitung

TECshow

TECshow Ion 132B Bedienungsanleitung

TECshow

TECshow MINI-HIVE 10 Bedienungsanleitung

TECshow

TECshow NEBULA FX 3-in-1 Bedienungsanleitung

TECshow

TECshow RAZOR CUBE Bedienungsanleitung

TECshow

TECshow HALO 7R Bedienungsanleitung

TECshow

TECshow BEAMER 7R Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung