
8
CR-1010 User Manual
Rev.01 082017
TechnicalSpecifications
Networks
3G/GPRS/EDGE
3G (850/900/1900/2100MHz) or GPRS/EDGE
(900/1800MHz) class 10
Authentication
Protocol
CHAP/PAP/MS-CHAP/MS-CHAPV2/etc
.
APN Support
Access Point Name supported
Platform
CPU
MT7620A
FLASH
16 Mbytes
SDRAM
128 Mbytes
Operating System Embedded Linux System
ExternalMemory
Interface
MICRO SD
SIM
Interface
Voltages Supported: 1.8V / 3.0V
Antenna
Interface
SMA female connector, Impedance 50 Ohm
LANInterface
Auto-Adaption
10M/100M Ethernet auto-adaptive, MDI/MDI-X auto
crossover
Isolation Protection 1.5KV network isolation transformer protection
RS232/RS485
Data Rate
1,200bit/s~115,200bit/s
Communication
Parameters
Parity: None, Even, Odd, Space, Mark; Data Bits: 5,
6, 7, 8; Stop Bits: 1, 1.5, 2
Protection
15KV ESD Protection
Online
Configuration
Serial, Telnet and Web configuration
Upgrade
Remote upgrade and web upgrade, utilizing
redundant backup mechanism for trouble-free
upgrades
Network
Functions
Routing
Static routing
Multi-Protocol
Support
ICMP, IP, TCP, UDP, DHCP, PPP, ARP, Telnet,
DNS, SSH, VRRP, HTTP, HTTPS, etc.
Connection
Supervision
Utilizing connection supervision mechanism,
ensuring the device is always on-line
NAT and PAT
Port Mapping
Network Address Translation (NAT) and Port
Address Translation (PAT),
Denying illegitimate host access
MAC Address
Bundling
Allowing extranet user to access specific intranet
port
DDNS
Supports Dynamic DNS (Domain Name System)
NetworkSecurity
VPN (optional)
Supports standard IPSec (both support main mode
and aggressive mode)
Supports PPTP/L2TP/GRE/SSL VPN
Firewall Strategy
State Packet Inspection(SPI), filtering multicast,
filtering PING packet, preventing DoS attack, setting
different firewall strategies
Indicators
LED Status
Indicators
LED Indicators for Signal strength
LED Status Indicators for Power, Status,
Network,WAN port, LAN Ports
ButtonReset
Resetting Factory Default / Reboot
PowerSupply
Power Input
10 – 30 Vdc, polarity dependent, reverse polarity
protection over-current protection, removable
industrial terminal block
Power Consumption 250mA @ 12V(max)