Teknik 5426133 Bedienungsanleitung

Home Study Lateral Filer

Model 5426133

Congratulations. You

are now an adult.

Teknik

www.teknikoffice.co.uk

Table of Contents Assembly Tools Required

Part Identiﬁcation

Hardware Identiﬁcation

Assembly Steps

No. 2 Phillips Screwdriver

Tip Shown Actual Size

4-5

6-30

Pae 2

Part Identiﬁcation

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁcation to help identify similar parts.

Now you know

our ABCs.

A RIGHT END (1)

B LEFT END (1)

C TOP (1)

D RIGHT FRONT/LEFT REAR LEG (2)

D61 DRAWER BACK (1)

D87 RIGHT DRAWER SIDE (1)

D88 LEFT DRAWER SIDE (1)

D729 DRAWER BOTTOM (1)

E LEFT FRONT/RIGHT REAR LEG (2)

F FRONT MOLDING (1)

G TOP END MOLDING (2)

H SHELF (1)

J BOTTOM (1)

K UPPER END MOLDING (2)

L LOWER END MOLDING (2)

M END MOLDING (2)

M63 DRAWER BRACE (1)

N BOTTOM MOLDING (1)

O BACK (1)

P BALLAST (2)

Q DRAWER FRONT (1)

M63

D61

D87

D88

D729

Pae 3

Hardware Identiﬁcation

FILE ROD - 2

FILE BAR - 2

1B FILE GLIDE - 2

(EXTENSION SET SHOWN SEPARATED)

EXTENSION SLIDE - 2

40MC

EXTENSION RAIL - 2

40MA

APPLIQUE CARD - 5

100P

ANGLE BRACKET - 7

WASHER - 2

10I

10A SLIDE CAM - 2

CAM SCREW - 9

PULL - 2

22K

WOOD DOWEL - 6

15F

FILE BRACKET - 2

12B HIDDEN CAM - 24

1F CAM DOWEL - 15

Pae 4

Hardware Identiﬁcation

åScrews are shown actual size. You may receive extra hardware with your unit.

BLACK 9/16" LARGE HEAD SCREW - 14

BROWN 7/16" LARGE HEAD SCREW - 4

SILVER 1/4" MACHINE SCREW - 2

61S

100S BLACK 2-3/4" FLAT HEAD SCREW - 4

BLACK 9/16" FLAT HEAD SCREW - 12

32S

BLACK 1-15/16" FLAT HEAD SCREW - 3

113S

30S BLACK 1-9/16" FLAT HEAD SCREW - 5

3S GOLD 5/16" FLAT HEAD SCREW - 8

Pae 5

Step 1

å Assemble your unit on a carpeted ﬂoor or on the empty carton to avoid scratchin your unit or the ﬂoor.

å Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into the LEFT END (B) until the shoulders of the SCREWS rest on the

surface of the LEFT END.

å NOTE: Do not overtihten the SCREWS.

å Slide the UPPER END MOLDING (K) onto the LEFT END (B). Line up the roove in the MOLDING over the heads of the

SCREWS in the LEFT END.

å NOTE: If the MOLDING comes up o of the SCREWS, remove it and slide it on aain.

å Slide the END MOLDING (M) onto the LEFT END (B) until it is aainst the UPPER END MOLDING (K). Line up the roove in

the MOLDING over the heads of the SCREWS in the LEFT END.

å NOTE: If the MOLDING comes up o of the SCREWS, remove it and slide it on aain.

These edes

should be even.

BLACK 9/16" FLAT HEAD SCREW

(6 used in this step)

32S

Shoulder

Apply pressure with your hands

as you uide the MOLDINGS over

the SCREWS and onto the ENDS.

Apply pressure with your hands

as you uide the MOLDINGS over

the SCREWS and onto the ENDS.

Shoulder

Pae 6

Step

å Slide the LOWER END MOLDING (L) onto the LEFT END (B).

Line up the roove in the MOLDING over the heads of the

SCREWS in the LEFT END.

å NOTE: The MOLDING should be even on both edes of the END.

å NOTE: If the MOLDING comes up o of the SCREWS, remove it

and slide it on aain.

Step 2

Shoulder

Apply pressure with your hands

as you uide the MOLDINGS over

the SCREWS and onto the ENDS.

Pae 7

Just think. The sooner

you do this, the sooner

you do somethin else.

Hardware Usage Guide

Start Tighten

Arrow

Minimum

190 degrees

Caution

Risk of damage or

injury. HIDDEN CAMS

must be completely

tightened. HIDDEN

CAMS that are not

completely tightened

may loosen, and parts

may separate. To

completely tighten:

Arrow

Maximum

210 degrees

3. Start Tighten

Arrow

Minimum

190 degrees

Caution

Risk of damage or

injury. HIDDEN CAMS

must be completely

tightened. HIDDEN

CAMS that are not

completely tightened

may loosen, and parts

may separate. To

completely tighten:

Arrow

Maximum

210 degrees

HOW TO USE A HIDDEN CAM & CAM DOWEL

Hole

Hidden Cam

Cam Dowel

Hole

Hidden Cam

Cam Dowel

Insert the metal end of the CAM

DOWEL into the HIDDEN CAM.

Metal end

Arrow

1. Push a HIDDEN CAM into

the part. The arrow in the

HIDDEN CAM must point

toward the hole in the

edge of the board.

Cam Screw

Hidden Cam

Arrow

Push a HIDDEN CAM into

the part. The arrow in the

HIDDEN CAM must point

toward the hole in the

ede of the board.

Hole

2. 3.

Insert the CAM SCREW into the HIDDEN CAM.

Tihten the HIDDEN CAM.

HOW TO USE A HIDDEN CAM & CAM SCREW

Turn the CAM SCREW until

the shoulder is aainst the

surface of the part.

Pae 8

å Turn four CAM SCREWS (8F) into one set of the LEGS (D and E) as

shown in diaram 1

å Insert two WOOD DOWELS (15F) into the LEGS (D and E) as shown

in diaram 1.

å Flip over the LEGS (D and E) as shown.

å Push two HIDDEN CAMS (1F) into the LEGS (D and E) as shown

in diaram 2. Then, insert the metal end of a CAM DOWEL (2F) into

each HIDDEN CAM.

Step 3

15F

Do not tihten the HIDDEN CAMS in this step.

Arrow

(2 used)

Metal end

Pae 9

å Push four HIDDEN CAMS (1F) into the LEFT END (B).

å Fasten the LEGS (D and E) to the LEFT END (B). Tihten

four HIDDEN CAMS.

å NOTE: Be sure the WOOD DOWELS in the LEGS insert

into the RIGHT END.

Step 4

Arrow

Anled ede

Pae 10

Inhaltsverzeichnis

Andere Teknik Inneneinrichtung Handbücher

Teknik

Teknik 5427428 Bedienungsanleitung

Teknik

Teknik Stationmaster 5426454 Bedienungsanleitung

Teknik

Teknik Boulevard Cafe Desk 5420701 Bedienungsanleitung

Teknik

Teknik Elstree 5426910 Bedienungsanleitung

Teknik

Teknik Barrister Home 5418902 Bedienungsanleitung

Teknik

Teknik New Hyde 426440 Bedienungsanleitung

Teknik

Teknik Essentials L-Shaped Desk 5425092 Bedienungsanleitung

Teknik

Teknik Barrister Home 5418891 Bedienungsanleitung

Teknik

Teknik Canal Heights Coffee Table 5419233 Bedienungsanleitung

Teknik

Teknik Hudson Elm finish 5427457 Bedienungsanleitung

Teknik

Teknik 5421405 Bedienungsanleitung

Teknik

Teknik Elstree Executive Desk 5426918 Bedienungsanleitung

Teknik

Teknik 5423547 Bedienungsanleitung

Teknik

Teknik D40104 Bedienungsanleitung

Teknik

Teknik 5425015 Bedienungsanleitung

Teknik

Teknik Barrister 5414720 Bedienungsanleitung

Teknik

Teknik 5423912 Bedienungsanleitung

Teknik

Teknik 5424933 Bedienungsanleitung

Teknik

Teknik Boulevard Cafe 5427345 Bedienungsanleitung

Teknik

Teknik Market 5425768 Bedienungsanleitung

Teknik

Teknik Boulevard Cafe Desk 5420701 Bedienungsanleitung

Teknik

Teknik Hudson Chunky Desk 5425833 Bedienungsanleitung

Teknik

Teknik Scribed Oak Desk 5414836 Bedienungsanleitung

Teknik

Teknik Hampstead 5426504 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung