Teknik Metro 5426461 Bedienungsanleitung

NOTE: THIS INSTRUCTION

BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR

FUTURE REFERENCE.

TV Stand

Metro Collection | Model 5426461

It stands. You sit.

A thing of beauty,

this one.

Teknik

www.teknikoffice.co.uk

Part Identiﬁcation

Hardware Identiﬁcation

Assembly Steps

Safety

Table of Contents Assembly Tools Required

No. 2 Phillips Screwdriver

Tip Shown Actual Size

5-14

Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or

death. A TV that is too large for the available space might be accidentally pushed or bumped o the furniture, or subject to tip-over.

• Check the size and weight of your TV. Compare it to the diagram below – before you begin assembly!

•

This Sauder unit is designed for use with ﬂat panel televisions weighing less than 50 pounds. Never use with a TV that weighs more

• The size of the television, front-to-back and side-to-side, must ﬁt within the space deﬁned in the diagram.

• Never place the front edge of the TV past the front edge of the TV support shelf (or stop molding – if equipped)

• Never allow the sides of the TV to extend past the side edges of the TV support surface.

• Be sure to apply the warning label as instructed later in the assembly. The label provides important safety related information.

WARNING

50 lbs.

13-7/8"

Skip the power trip.

This time.

Page 2

43-1/2"

Straight Edge Screwdriver

Part Identiﬁcation

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁcation to help identify similar parts.

Now you know

our ABCs.

A SHELF (1)

B BOTTOM (1)

C LEFT END (1)

D RIGHT END (1)

E UPRIGHT (1)

F BACK (1)

G SLIDING DOOR (1)

H FRAME (2)

J TUBE (2)

K BASE (1)

L FOOT (1)

M GLASS TOP (1)

Page 3

Hardware Identiﬁcation

åScrews are shown actual size. You may receive extra hardware with your unit.

Page 4

LOWER GUIDE - 2

HIDDEN CAM - 6

L-WRENCH - 1

(Refer to the last step for proper

location and application)

WARNING LABEL - 1

522,68 22,68

50 lbs. 22 kg 22 kg

CAM SCREW - 6

2APPLIQUE CARD - 1

5KNOB - 1 UPPER GUIDE - 2

1-9/16" PAN HEAD SCREW - 6

1/2" HEX HEAD SCREW - 10

1-3/16" HEX HEAD SCREW - 6

1/2" FLAT HEAD SCREW - 8

WOOD DOWEL - 6

6BUMPER CARD - 1

13 13/16" MACHINE SCREW - 1

å Assemble your unit on a carpeted ﬂoor or on the empty

carton to avoid scratching your unit or the ﬂoor.

å Fasten the TUBES (J) and BASE (K) to one of the

FRAMES (H). Tighten four 1/2" HEX HEAD SCREWS (15)

using the L-WRENCH (10).

å Fasten the other FRAME (H) to the TUBES (J) and

BASE (K). Tighten four 1/2" HEX HEAD SCREWS (15)

using the L-WRENCH (10).

Step 1

Page 5

1/2" HEX HEAD SCREW

(8 used in this step)

Remember:

Righty tighty.

Lefty loosey.

The TABS

must be here.

Hardware Usage Guide

HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL

NOTE: Various CAM SCREWS or a CAM DOWEL may be used.

Cam Screws Cam Dowel

Turn the CAM SCREW or

gently tap the CAM DOWEL

until the shoulder is against

the surface of the part.

Hidden CamHidden Cam

Arrow

Push a HIDDEN CAM into

the part. The arrow in the

HIDDEN CAM must point

toward the hole in the

edge of the board.

Hole

Insert the CAM SCREW or CAM DOWEL into the

HIDDEN CAM. Tighten the HIDDEN CAM.

Page 6

å Insert three WOOD DOWELS (3) into the SHELF (A).

å Turn six CAM SCREWS (2) into the remaining holes in

the SHELF (A).

å Push six HIDDEN CAMS (1) into the ENDS (C and D)

and UPRIGHT (E).

Step 2

Page 7

Arrow

(6 used)

å Fasten the ENDS (C and D) and UPRIGHT (E) to the

SHELF (A). Tighten six HIDDEN CAMS.

å NOTE: Be sure the WOOD DOWELS in the SHELF

insert into the ENDS and UPRIGHT.

å Slide the BACK (F) into the grooves in the SHELF (A)

and ENDS (C and D).

Step 3

Page 8

Surface without

HIDDEN CAMS

Groove

This groove is shorter and wider

than the other long groove.

Surface without

HIDDEN CAMS

Surface with

HIDDEN CAMS

Finished surface

å Insert three WOOD DOWELS (3) into the ENDS (C and D)

and UPRIGHT (E).

å Fasten the BOTTOM (B) to the ENDS (C and D) and UPRIGHTS (E).

Use six 1-9/16" PAN HEAD SCREWS (11).

å NOTE: You should start each SCREW a few turns before completely

tightening any of them.

å NOTE: Be sure the WOOD DOWELS in the ENDS and UPRIGHT

insert into the BOTTOM.

å NOTE: Be sure the BACK (F) inserts into the groove in the BOTTOM.

Step 4

Page 9

Longer groove F

1-9/16" PAN HEAD SCREW

(6 used in this step)

Step 5

Page 10

å Carefully turn the box assembly onto the BACK (F) as shown.

å Place the metal parts assembly down over the box exactly as shown.

å Fasten the BASE (K) to the BOTTOM (B). Tighten six 1-3/16" HEX HEAD SCREWS (12) using

the L-WRENCH (10).

å NOTE: You should start each SCREW a few turns before completely tightening any of them.

å Peel APPLIQUES from the APPLIQUE CARD (4) and stick them onto each visible HIDDEN

CAM in the ENDS (C and D) and UPRIGHT (E).

The TABS

must be here.

10 1-3/16" HEX HEAD SCREW

(6 used in this step)

Andere Teknik Inneneinrichtung Handbücher

Teknik

Teknik Louvre 5415109 Bedienungsanleitung

Teknik

Teknik Clifton Place 5421115 Bedienungsanleitung

Teknik

Teknik 5422378 Bedienungsanleitung

Teknik

Teknik 5427428 Bedienungsanleitung

Teknik

Teknik Hampstead Park 5420834 Bedienungsanleitung

Teknik

Teknik Clifton Place 5421116 Bedienungsanleitung

Teknik

Teknik Barrister Home 4 Drawer Chest Bedienungsanleitung

Teknik

Teknik Hampstead 5426504 Bedienungsanleitung

Teknik

Teknik 5425655 Bedienungsanleitung

Teknik

Teknik 5418072 Bedienungsanleitung

Teknik

Teknik 5420275 Bedienungsanleitung

Teknik

Teknik Mahattan View 5423446 Bedienungsanleitung

Teknik

Teknik 5426135 Bedienungsanleitung

Teknik

Teknik 5410416 Bedienungsanleitung

Teknik

Teknik Hudson Elm finish 5427422 Bedienungsanleitung

Teknik

Teknik 5418269 Bedienungsanleitung

Teknik

Teknik Hampstead Park Compact Desk 5420284 Bedienungsanleitung

Teknik

Teknik Barrister 5420330 Bedienungsanleitung

Teknik

Teknik Industrial Style Bench Desk 5420032 Bedienungsanleitung

Teknik

Teknik Barrister Home 5420176 Bedienungsanleitung

Teknik

Teknik 5425015 Bedienungsanleitung

Teknik

Teknik 5421405 Bedienungsanleitung

Teknik

Teknik White Home Study L-Shaped Desk Bedienungsanleitung

Teknik

Teknik 5412885 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung