Teknion Interpret Bedienungs- und Wartungsanleitung

24" - 48" wide Return Frame for Single Worksurface (WWSRS),

24" - 48" wide Single Return Worksurface (WWWRRS)

Part and Product Identification

For Customer Support please contact

[email protected]

Section:

Description: Page No:

Date:

Rev. No: 02

Jan. 2017 1 of 6

INT_003b

interpret

Curve Leg without infill shown

G- Single Return Worksurface

(WWWRRS) x1

C - 1/4-20x3-12 Flat Head Machine

Screw Quadrex Drive

(E01-0771) x2

B3 - 5/16-18 Hex Nut, 1/2 A/F, .265

(E01-0755) x14

B1 - Reverse Transverse Beam

Assembly

(N02-3696) x2

D - Flush Plate

(A15-6948) x2

E- #10x0.875" LG. Screw, Quad. Pan

Washer

(E07-0077) x8

F - Front Standoff

(B02-0658) x4

B2 - 5/16-18x2.5 Long, Socket Head

Cap Screw

(E01-0756) x14

Pre assembled

A1 - Curve Leg with Wood Infill

(N02-2365) x1

Curve Leg with Glass Infill

(N02-2349) x1

Curve Leg Open

(N02-2363) x1

A2 -Curve Leg Leveler Add-on

Puck

(A18-0242) x8

Pre assembled

Section:

Description: Page No:

Date:

REMOVE MOUNTING SCREWS CLAMP RELOCATION DETAIL

INT_003b

2 of 6

Jan. 2017

interpret

End Gable Connection (Curve Leg)

Mid Gable Connection

STEP 1: Remove pairs of Screws and Nuts on both ends of Wing Beams Assemblies as shown.

Save for a future installation steps. Determine the type of Connection is on each end. Change

Mid Gable Connection to Beam Connection by removing Clamp Brackets and moving them

one hole forward as shown. Remove Level Pucks from the Curved Leg Assembly.

Beam Connection

Mid Gable Connection

Beam and Screw

position during

future installation

Beam Connection: Partially see through Clamp. After connection is done, you can see

Bolts on the other side of Transverse Beam.

Section:

Description: Page No:

Date:

FASTEN BEAMS TO THE LEG ASSEMBLY ATTACH TO DOUBLE SIDED FRAME

INT_003b

3 of 6

Jan. 2017

interpret

STEP 2: Attach Beam Assembly to Curve Leg. Use holes on the Gable as indicated. Make sure

to use End Gable Connection ends of Beams. Fasten, but do NOT TIGHTEN!

Position End Gable

with holes facing inward.

STEP 3: Bring Single Return Frame assembly to previously assembled Double - Sided Frame at

specified location.

NOTE: Revere Screws and Nuts when

Curve Leg

has a solid or glass infill.

End Gable Connection

Double Sided Frames

Section:

Description: Page No:

Date:

FASTEN TO DOUBLE SIDED FRAME LEVEL, SQUARE, INSERT LEVELER COVERS

INT_003b

4 of 6

Jan. 2017

interpret

STEP 4: Fasten LOOSELY using Socket Cap Screw and Nuts, with Nuts placed on the top and

Screws inserted from the bottom to allow for future adjustment.

STEP 5: Insert Add on pucks, level and square frames. For accuracy Laser Lever is

recommended. Lock levelers in position and slide Leveler Covers inside legs.

Part of

Double Sided

Frame Kit

NOTE:Use as many Pucks as required. They have to

be FULLY ENGAGED and there should be NO

SPACE between Pucks and the bottom of Curve Leg

frame.

bottom of Curve Leg frame

Section:

Description: Page No:

Date:

INSERT FRONT STANDOFFS WORKSURFACE ALIGNMENT

INT_003b

5 of 6

Jan. 2017

interpret

Step 7: Line up inserts under the Worksurface and holes in Clamp Brackets and drop

Worksurface on the Frame. Line up edges as shown. Slide Clamp Brackets on the Beam if

adjustment is necessary.

STEP 6: Insert Front Standoffs, spacing them evenly along both beams. Place and fasten

Worksurfaces to the top of Double Sided Frame/s. Refer to INT_002a,b for instructions.

Double sided Frame

Worksurface.

Wire Gap shown.

Align

edges

Section:

Description: Page No:

Date:

FASTEN WORKSURFACE DETAILS

INT_003b

6 of 6

Jan. 2017

interpret

STEP 8: Attach Worksurface to the Frame using machine screws. Connect Worksurfaces with

Flush plates. Tighten all screws.

Andere Handbücher für Interpret

Inhaltsverzeichnis

Andere Teknion Rack & Stand Handbücher

Teknion

Teknion YMSTR Bedienungsanleitung

Teknion

Teknion HNBEBF Bedienungs- und Wartungsanleitung

Teknion

Teknion YMSTA Bedienungs- und Wartungsanleitung

Teknion

Teknion Interpret Bedienungs- und Wartungsanleitung

Teknion

Teknion district SUPPORT FOOT FOR DISTRICT FREESTANDING WITH GLASS PANEL... Bedienungsanleitung

Teknion

Teknion interpret WWSTW Bedienungsanleitung

Teknion

Teknion transit Bedienungsanleitung

Teknion

Teknion JNSASW Bedienungsanleitung

Teknion

Teknion complements CEREBRO Bedienungs- und Wartungsanleitung

Teknion

Teknion THSCD Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung