Teledyne PXP-100B Bedienungsanleitung

Introduction

Teledyne LeCroy's PCI Express PXP-100B Test

Platform 16x2.5GT/s / 16x5.0GT/s provides a convenient,

powerful and flexible test platform for PCI Express devices

at data rates up to 5.0 GT/s and lane widths up to x16.

The Test Platform allows the Summit Z3-16 Exerciser to act

as a host system, enabling extensive protocol-level testing

of PCIe® devices.

For use as a host emulator, the Summit Z3-16 Exerciser is

plugged into any slot and connected to an external power

source. The DUT is plugged into the remaining available

slot, the PXP-100B provides the necessary power up to

75W per slot.

In addition to using the Test Platform with the Teledyne

LeCroy Summit Z3-16, the user can connect two of their

own devices and use the Test Platform as a PCIe

backplane by adding an interposer or using the built in

midbus footprint and using a midbus probe will allow an

analyzer to capture protocol traffic between the devices. PXP-100B PCI Express Test Platform

PXP-100B PCI Express Test Platform

16x2.5GT/s / 16x5.0GT/s

Quick Start

Before Starting

Use this document for quick installation and setup. If you

experience problems or need more information, contact Teledyne

LeCroy customer support or check the Teledyne LeCroy. web site.

For details about the latest software version, see the Readme file

on the Installation DVD.

Unpacking the Test Platform

Inspect the received shipping container for any damage. Unpack the container and account for each of the system

components listed on the accompanying packing list. Visually inspect each component for absence of damage.

In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

Components

The package includes the following components:

•PCI Express PXP-100B Test Platform

•AC power cord

•Bracket

•Bracket extension and screws (helpful when using an interposer)

•Quick Start Guide (this document)

Installation

Follow the procedure below when using an interposer to analyze the traffic between two PCIe devices:

1. Remove the large thumbscrews attached to the base and then position the lower bracket.

2. Screw in lower bracket using 4 large thumbscrews.

3. Plug an interposer in the available slot.

4. Add small thumbscrew to attach interposer to lower bracket.

5. Install a DUT into second slot on PXP-100B and add second small thumbscrew to attach to lower bracket. Traffic from

this DUT will show as downstream in the CATC Trace.

6. Install the second DUT into upper connector on the interposer. Traffic from this DUT will show as upstream in the CATC

Trace.

7. Position and screw in the bracket extension using 4 small thumbscrews.

8. Add small thumbscrew to attach DUT to bracket extension.

9. Plug in analyzer cable.

Test Platform

Trademarks and Servicemarks

Teledyne LeCroy, Summit Z3-16 and Summit T3-16 are

trademarks of Teledyne LeCroy.

All other trademarks are property of their respective companies.

Changes

Product specifications are subject to change without notice.

Teledyne LeCroy reserves the right to revise the information in this

document without notice or penalty.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions Group

web site for software updates and other support related to this

product. Software updates are available to users with a current

Maintenance Agreement.

Web: teledynelecroy.com/tm/software/PCIe

E-mail: [email protected]

Support:teledynelecroy.com/support/contact

This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Clock Input Specification

Clock Output Specification

Parameter Specification

Peak to peak voltage level 0.3 V (Min), 1 V (Max)

Input interface level accepted LVPECL, LVDS, LVHSTL, SSTL, HCSL

Nominal frequency 100 MHz

Parameter Specification

Peak to peak voltage level 0.3 V

Interface level LVDS

Nominal frequency 100 MHz

J1000 Selected Clock

Short External

Open Internal

Clock Configuration

Environmental Conditions

• Temperature: Operating 32° F to 122° F (0° C to 50° C)

• Temperature: Non-Operating 14° F to 176° F (-10° C to 80° C)

• Humidity: Operating 10% to 90% RH (non-condensing)

Andere Teledyne Prüfgeräte Handbücher

Teledyne

Teledyne LabMaster 10 Zi Series Stücklistenhandbuch

Teledyne

Teledyne T3DSO3000 Bedienungsanleitung

Teledyne

Teledyne T3DSO1000A Series Bedienungsanleitung

Teledyne

Teledyne T3DAQ1-16 Bedienungsanleitung

Teledyne

Teledyne T3DSO1000 Bedienungsanleitung

Teledyne

Teledyne T703 Bedienungsanleitung

Teledyne

Teledyne HDO6000B Bedienungsanleitung

Teledyne

Teledyne Everywhereyoulook T3DSOH1000 Bedienungsanleitung

Teledyne

Teledyne T700 Bedienungsanleitung

Teledyne

Teledyne HPM 4 Bedienungsanleitung

Teledyne

Teledyne waverunner xi-a series Stücklistenhandbuch

Teledyne

Teledyne USB-PD TDMP Bedienungsanleitung

Teledyne

Teledyne 401 Bedienungsanleitung

Teledyne

Teledyne VISION G2 CLASSIC 6 Bedienungsanleitung

Teledyne

Teledyne ZD200 Stücklistenhandbuch

Teledyne

Teledyne 804A Bedienungsanleitung

Teledyne

Teledyne CD14 Bedienungsanleitung

Teledyne

Teledyne T3HVD Bedienungsanleitung

Teledyne

Teledyne GT Series Kurzanleitung

Teledyne

Teledyne HDO8000A Bedienungsanleitung

Teledyne

Teledyne T700 Bedienungsanleitung

Teledyne

Teledyne T3EL15030 P Series Bedienungsanleitung

Teledyne

Teledyne T3CP100-2 Bedienungsanleitung

Teledyne

Teledyne CP030A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung