Telefunken TKP2147STX Bedienungsanleitung

WARNING: TOREDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to

alert the user to the presence of uninsulated voltage within the product s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

the person.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION:

Use of controls, adjustments or procedures other than those specified herein may result in

hazardous radiation exposure.

CAUTION

RISKRISK OFOF ELECTRIELECTRICC

SHOCKSHOCK DODO NOTNOT OPEN.OPEN.

dangerous

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to

qualified service personnel.

2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to

traffic or abuse. This may result in a shock or fire hazard.

4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage

points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet

and refer servicing to qualified service personnel.

7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to

qualified service personnel.

8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury

to a child or an adult, and serious damage to the appliance.Use only with a cart or stand recommended by the

manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and

should use a mounting kit approved by the manufacturer.

10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces

may cause the appliance and cart combination to overturn.

CAUTION:

Read all of these instructions. Save these instructions for later use.Follow all Warnings and

Instructions marked on the audio equipment.

1. Read Instructions- All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

IMPORTANT SAFETY INSTRUCTIONS

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc.

Never expose the set to rain or water.If the set has been exposed to rain or water, unplug the set from the wall

outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to

protect it from overheating. These openings must not be blocked or covered.

Never cover the slots or openings with cloth or other material.

Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.

Never place the set near or over a radiator or heat register.

Never place the set in enclosure, unless proper ventilation is provided.

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.

70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection

to grounding electrode, and requirements for the grounding electrode.

15.2. Note to CATV system installer : (Only for the television set with CATV reception)

This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as practical.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power

circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning

and power-line surges.

ANTENNA

LEAD- IN WIRE

ANTENNA DISCHARGE

UNIT (NEC SECTION

810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC SERVICE

EQUIPMENT

GROUND CLAMP

NEC-NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

a built-in

installer s

OPERATION OF YOUR SET

18.

This television set should be operated only from the type of power source indicated on the marking label.

If you are not

sure of the type of power supply at your home, consult your television dealer or local power company. For television

sets designed to operate from battery power, refer to the operating instructions.

19. If the television set does not operate normally by following the operating instructions, unplug this television set from the

wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating

instructions as improper adjustment of other controls may result in damage and will often require extensive work by a

qualified technician to restore the television set to normal operation.

20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on

a holiday, turn the television set and unplug the television set from the wall outlet.

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,

do not attempt any further adjustment. Unplug the set and call your dealer or service technician.

22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for

service, unplug the set and have it checked by a professional service technician.

23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being

turned on or off.If the snapping or popping is continuous or frequent, unplug the set and consult your

dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.

25.When replacement parts are required, be sure the service technician has used replacement parts specified

by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

26. Upon completion of any service or repairs to the television set, ask the service technician to perform

routine safety checks to determine that the television is in safe operating condition.

off

PFS2 FORMAT-1 Report

Date:2004-9-29 10:37

ProductView......:

Report by............:

Specs / Products

MasterData

Customer Id BGH S.A.

Version 1

Status

Locked

12NC

Brand TELEFUNKEN

EAN \

UPC \

Rece

tion

+Tunin

resets/channels 181, Full-Cable

+Tunin

- technolo

PLL

+Tunin

- Indication Full-Cable

+Fre

Bands FS TUNER

+Channels

+IF Fre

45.75M

+TV S

stems Off Air/Cable NTSC-M, PAL MN

+Add S

stems Ext In 4.43 NTSC, 4.43PAL

+TV S

stems Multi PAL NTSC

+Sound S

stems AV STEREO,BTSC

Picture - Processin

+Scan Standard

+Scan Modes 4:03

+Wide Screen Switchin

+Combfilter

+Picture Control Brightness, Color, Contrast, Tint, Sharpness

Con Var, Smart pict 4 modes

+Pict Enhancement Blue Mute

+Pict Noise Reduction Yes

Picture - Dis

+Dis

+Screen Format

+Size

(

Visual

)

" - size/vis. cm 21"

+Deflection S

stem

(

CRT onl

+Tube Technolo

(

CRT onl

+CRT Defl

+CRT Gun

+CRT Ma

n field

+Resolution

+Coatin

(

onl

for D.V. sets

)

+White Point

Sound

+Leaflet Power 8W

+RMS Power Intern 2X4W(for 21")

+RMS Power Extern

+Surround Sound YES

' +Sound Features Mute, Smart sound(4 modes)

+Sound Control Balance, Bass, Treble, Volume

Sound - S

eakers

eaker confi

uration 2 speakers

eakers used

eaker Size

User Interface

+Interface Name 21286

+Voice Control

+Menu Cursor Control

+Menu Colours

+Menu Lan

es Spanish, English, Franch, Portuguese

+Special Features V-chip with Child Lock, CCD, Favorite

channel, Notebook, Biological,Calendar

erational Features Alternate Channel/ recall

+PP Features one PP for all channel

Product:

TKP2147STX

2004-9-29 10:41 1465 PFS 1 of 3

Date:2004-9-29 10:37

ProductView......:

Report by............:

Specs / Products

Product:

TKP2147STX

+Tuning/Install Features Auto Cable/ Auto select. Auto channel Prog,

Cable/Antenna select, Channnel Edit,

Factory Mode, Language Selection, Service

Mode

+Clock/Timer Functions sleep timer

+Local Controls Front Channel +/-, Volume+/-, Mains(Tact

Switch), Menu, TV/Video

+Local Controls To

+Indicators - screen

+Indicators - front

+Numb of Loc Cont

(

incl Mains

)

+Number of Ind.

(

incl Mains

)

+Local Controls

(

Old

)

Remote Control

+Remote Control - sco

eTV

+Remote Control - t

eStandard

+Remote Control - t

enr F

+Remote Control - features

Connectors Rear

+Scart RGB+Y/C+CVBS

+Scart RGB+CVBS

+Scart CVBS+Y/C

+Com

onent In

(

Y/U/V

)

Cinch x

+In Y/C+Cinch

(

CVBS+St

)

+In Y/C+Cinch

(

CVBS+Mo

)

+In Y/C+Cinch

(

)

+In BNC

(

CVBS

)

+In Cinch

(

CVBS+St

)

+In Cinch

(

CVBS+Mo

)

+Out Cinch

(

CVBS+St

)

+Out Cinch

(

CVBS+Mo

)

+Out Cinch Audio Stereo

+Out Cinch Audio Mono

+Out Cinch Dolb

Surround

+Di

Audio Out

+Louds

eakers

+Control Busses

+Feature Slot

+ITV Smart Port

+Terr. Antenna in 75 Ohms(F type)

Guide + IR Blaster Jack

Connectors Front

+In Cinch

(

CVBS + St

)

+In Cinch

(

CVBS+Mo

)

+Head

hone Out

Connectors Side

+In Y/C + Cinch

(

CVBS+St

)

+In Y/C + Cinch Stereo

+In Cinch

(

CVBS + St

)

+IN Cinch

(

CVBS + Mo

)

+Head

hone Out

Connectors To

Connectors Mechanical

lin

+Cabinet Name 21286

+Confi

uration

+Gra

hics/Lo

o's

+Cabinet Colour and Finish

+Mechanics

eaker Visibilit

General

+Se

ment

+Chassis M123A

+Software Deliver

Mode

+Software Version

+Mains Volta

e110-240V

+Mains Fre

uenc

50 / 60 Hz

e Mains Cord Argentina plug

2004-9-29 10:41 1465 PFS 2 of 3

Date:2004-9-29 10:37

ProductView......:

Report by............:

Specs / Products

Product:

TKP2147STX

Power Consum

tion

(

)

TV in On

Power Consum

tion SB in Watts less than 3W

Power Consum

tion Semi SB in W

+Power in "ON" for

+Power in Standb

for

+Power in "OFF" for

Wei

(

)

(

incl. Packa

Wei

(

)

(

excl. Packa

)

Wei

ht AVUnit excl Packa

+INDICATION on BACKCOVER

+Channel

Final E

ment

+Packa

- methods

+Documents and manuals

+Lan

es DFU

+Cables Su

lied

+Antenna Su

lied

+Stand Su

lied

+Aux E

m Su

lied

Packa

- width cm

Packa

- hei

ht cm

Packa

- de

th cm

Miscellaneous

+EAN Indication

robation CB

+Tests

+Local Inte

ration

Various Perf. Param.

+Service Call-Rate

PIP/POP

+Features

ital Rece

tion

+Transmission

Built-in Data S

stem

+Text Standard

(

Tele

)

text Features

+Nbr bck

rnd

e / Mem Size

+Text Technolo

+Di

ital Data handlin

+Pro

ram Guide

Built-in Clock/Timer

+Features

Built-in Radio

Built-in PC dis

+PC S

nch

+PC Control

Built-in DVD drive

e of Medium

e of Deck

Phased Out Items

+Tuner/Frontend

+Sensitivit

+CRT EHT

+Li

htnin

Protection

+Account

+XX

(

Radio Antenna in

)

+Non Volatile Memor

+In Y/C + Cinch

(

CVBS+Mo

)

Version of deck

2004-9-29 10:41 1465 PFS 3 of 3

Alignment Procedure of 2170SG Color TV

1. FLOWCHART OFALIGNMENT PROCEDURE

2 Adjustment of B+ voltage

1) Apply 120VAC(±5V) to mains power input, and Philips standard testing pattern

to RF input.

2) Adjust VR830 in STANDARD mode until voltage at TP2 (B+) is 108V ±0.5V.

3. RFAGC adjustment

Observe monitor the collector waveform of Q101 with the probe of Oscilloscope as

illustration below. Select channel 2 (>70dB) from the antenna input. Enter D-mode,

select menu6 to adjust RFAGC item until the monitor peak value to 0.8Vp-p.

IN60

3Pf

输出

输入

4. Screen & Focus voltage adjustment

Apply pattern signal in normal status, enter D①-mode, press “TV/AV” button to turn

off the vertical output.

Adjust the SCRREEN switch on the flyback transformer to make a horiz②ontal

shining line just visible on the screen.

Turn on the vertical output, adjust the “FOCUS” on the flyback transformer to③

obtain the optimum focus.

5. White balance adjustment

1)Apply the black and white pattern in normal status;

2)Alignment of normal color temperature

①Change Color Temperature to normal status

②Use a color analyzer to measure the black side of the screen. By changing the

value of RC, GC and BC, set the reading of the color analyzer to X=285, Y=295.

B+

adjustment

AGC Screen & Focus

adjustment

White balance

adjustment

Sub-brightness

adjustment

Pincushion correction &

Horizontal Amplitude

adjustment

Center & Amplitude an

OSD adjustment

INPUT OUTPUT

③Use a color analyzer to measure the white side of the screen. By changing the

value of GD, BD, set the reading of the color analyzer to X=285, Y=295.

④Separately set the brightness and contrast from min. to max., repeat the step 2 and

3 until the reading of the color analyzer is correct.

3)Alignment of warm color temperature

①Change Color Temperature to warm status

②Use a color analyzer to measure the black side of the screen. By changing the value

of RC-W, GC-W and BC-W, set the reading of the color analyzer to X=294, Y=303.

③Use a color analyzer to measure the white side of the screen. By changing the value

of GD-W, BD-W set the reading of the color analyzer to X=294, Y=303.

④Separately set the brightness and contrast from min. to max., repeat the step 2 and 3

until the reading of the color analyzer is correct.

4)Alignment of cold color temperature

①Change Color Temperature to cold status

②Use a color analyzer to measure the black side of the screen. By changing the value

of RC-C, GC-C BC-C , set the reading of the color analyzer to X=279, Y=286.

③Use a color analyzer to measure the white side of the screen. By changing the value

of GD-C, BD-C, set the reading of the color analyzer to X=279, Y=286.

④Separately set the brightness and contrast from min. to max., repeat the step 2 and 3

until the reading of the color analyzer is correct

Note: Provided the production line is equipped with the self- White balance

adjusting equipment, white balance of M123A chassis can be adjusted automatically

as following: Press “I2C BUS” button under factory mode, the TV set will adjust

automatically.

6. Adjustment of Sub-brightness,

①Apply the Grey-scale/Color bar (NTSC signal) to the AV input, in normal status.

②Select BRTC to adjust the sub-brightness, until that the 2nd dark bar of 8 level

Grey scale just can be seen.

7. PAL picture geometric adjustment

menu 3

HPOS6/HPOS5（HZ horizontal center of 60/50 HZ Source）

Menu 2

HIGH6/HIGH5(verticalamplitude)

VCEN5/VCEN6(position of vertical center)

VP60/VP50（vertical position）

VLIN6/VLIN5（vertical linearity）

VSC6/VSC5（V-S Correction）

8 initialization

press sound-effect under factory mode, the set will initialize, until “OK” appears

on the screen which means the initialization is finished. After initialization, the set

will quit factory mode automatically.

Factory settings

D-mode:

Enter D-Mode by pressing D-Mode ON/OFF key, and then you can enter the D-mode.

S-mode:

Enter S-Mode by pressing VOLUME DOWN key on the unit until the

volume decrease to minimum level, then press the DISPLAY key on the remote

handset (don’t release the volume key) and you can enter S- mode.

After enter D-mode or S-mode, press OK, then press program up/down to

select menu from menu 1 to menu 22, press OK to enter the menu, press program

up/down to select item, press volume up/down to adjust the setting. Press D-mode

again to quit factory mode.

You can also enter menu 1 to menu 19 directly by pressing digital button 1~9,

0, notebook, CAP, Display, Sleep, Calendar, System/INS, Favorite, Return, Picture.

Menu 1 (Remote key: “1”)

Item Remark

RC R cut-off setting

GC G cut-off setting

BC B cut-off setting

GD G drive setting

BD B drive setting

Menu 2 (Remote key: “2”))

Item Remark

HIGH5 Height (50Hz)

VP50 Vertical position (50Hz)

VLIN5 Vertical linearity (50Hz)

VSC5 Vertical S correction (50Hz)

VBLK5 Vertical blanking start & stop [1C, bit 3 ~ 0]

VCEN5 Vertical center (50Hz)

Menu 2 (Remote key: “2”)

Item Remark

HIGH6 60Hz height

VP60 Vertical position

VLIN6 60Hz Vertical linearity

VSC6 Vertical S correction (60Hz)

VBLK6 Vertical blanking start & stop [1CH, bit 3 ~ 0]

VCEN6 Vertical center (60Hz)

Menu 3 (Remote key: “3”)

Item Remark

HPOS5 Horizontal position (50Hz)

Menu 3 (Remote key: “3” )

Item Remark

HPOS6 Horizontal position (60Hz)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Telefunken Fernseher Handbücher

Telefunken

Telefunken TE24555S27YXD Bedienungsanleitung

Telefunken

Telefunken TE39PNDB42V2D Bedienungsanleitung

Telefunken

Telefunken TE24550S27YXD Bedienungsanleitung

Telefunken

Telefunken TKP2939ST Bedienungsanleitung

Telefunken

Telefunken TFL65FHD200BC Bedienungsanleitung

Telefunken

Telefunken TK2929STX Bedienungsanleitung

Telefunken

Telefunken DF321C Bedienungsanleitung

Telefunken

Telefunken TTV-21N02 Montageanleitung

Telefunken

Telefunken 40FAG8030 Bedienungsanleitung

Telefunken

Telefunken TTV-149 Bedienungsanleitung

Telefunken

Telefunken TE32550B42V2H Bedienungsanleitung

Telefunken

Telefunken TE32550S27YXD Bedienungsanleitung

Telefunken

Telefunken TE43550S39U2P Bedienungsanleitung

Telefunken

Telefunken TE32555B45V2D Bedienungsanleitung

Telefunken

Telefunken 75TU6200 Bedienungsanleitung

Telefunken

Telefunken TF-LED32S22T2 Bedienungsanleitung

Telefunken

Telefunken TTV-299 Bedienungsanleitung

Telefunken

Telefunken T32TX275DLBPOS Bedienungsanleitung

Telefunken

Telefunken TK3429STX Bedienungsanleitung

Telefunken

Telefunken TE24550B42V2D Bedienungsanleitung

Telefunken

Telefunken T22R900 Bedienungsanleitung

Telefunken

Telefunken UMBRA40UHD Bedienungsanleitung

Telefunken

Telefunken TE24550B42V2E Bedienungsanleitung

Telefunken

Telefunken DF321C Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung