Telefunken TTV-299 Bedienungsanleitung
MODEL: TTV-299
FULL ON SCREEN DISPLAY
228 PROGRAM MEMORY
WITH INFRARED REMOTE CONTROL
OWNER'S MANUAL
１
I. Safety and Precautions
………………………………………………………………….. 2
II. Installation
Antenna connection. ……………………………………………………………………… 3
Remote control Preparation ……………………………………………………………..
4
III. Control Location
Television…………………………………………………………………………………… 5
Remote control……………………………………………………………………………. 6
IV. Operating Instructions
Turn the power supply ON/OFF………………………………………………………….
V. TV operation
Program Selection…………………………………………………………………………… 8
Adjustment …………………………………………………………………… 9
Program preset (automatic search)
Program preset (Semi automatic search)
Fine tune
Skip over undesired Program number
Basic operation: Picture and sound control ……………………………………………… 12
Settin time …………………………………………………………………… 14
Sleep time, , auto volume limit settin …………………………………………………….
15
Set sleep Timer
Set automatic volume limit
Selection of blue back round and black stretch …………………………… 16
Technical operation: Sin le button hoppin , pro ram sequence. ……………………… 1
VI. Connection with Other Devices
Connect CD, VCD, DVD or other sound, picture and audio or video output
devices
………………………………………………………………………………. 18
VII. Miscellaneous
Guide to simple trouble-shootin …………………………………………………………. 19
Specification ………………………………………………………………………………… 20
Packin ……………………………………………………………………………………… 20
Contents
Dear Customer:
Thank you for purchasin our latest TV set.
Please read this instruction manual carefully fir
st before operation so that
you can use it in a safe and reliable manner. Please also store it safely for
future reference.
２
To ensure safe and reliable operation of the TV set, please observe the following precautions in
installation, operation and maintenance.
A
AA
Attention
ttentionttention
ttention:
: :
:
１·Pay attention to the power supply cord before installing the TV set. Do not hang anything on the
cord, and avoid treading on the cord.
２·The slots on the back housing are designed for ventilation to prevent overheating. They must
never be covered or blocked. The TV set must not be placed near a heat source such as radiator, air ducts
direct sunlight.
３·The outdoor antenna must not be erected close to HV lines or other power supply lines. Use
extreme care when erecting the antenna.
4·This TV must be connected to AC 240V 50Hz. Never connect to DC supply or any other power
supply
5·Do not let any object fall into the ventilation openings of the TV set housing, nor let any liquid
flow into the it via the openings. This may cause the television to short circuit
6·Do not subject the TV set to rain, or use it in damp environment. In cleaning dust, be sure to
remove the power supply plug from its socket first. Do not clean the housing directly with liquid
detergent, use a damp cloth. Be sure to remove the power supply plug from its socket and remove the
antenna plug during a thunderstorm or when it will not be used for long time, to avoid components being
damaged by lightning.
·If you use an indoor antenna, do not let it touch any electrical appliance, or normal reception of
TV program may be affected.
Safety:
Safety:Safety:
Safety:
1Never open the rear of the television . High Voltage components can cause fire, electric shock or
injury. All internal work should be carried out by qualified TV service personnel only
2. Remove the power supply plug from its socket in case of the following conditions, and consult
with service personnel.
(1) The power cord and plug is damaged or cracked.
(2) Any object has fallen into or liquid flown into the TV set.
(3) The performance of TV set has deteriorated significantly or there is damage on the housing.
(4) The TV set will not operate normally according to the instructions.
3. Please remove the power supply plug from its socket when the TV set will not be used for long
time.
Safety and Precautions
３
First read carefully the relevant instructions in
“Safety and precautions”.
Place the TV set in the room where there is no direct sunlight on it. Any light reflecting from the
screen will cause eye fatigue.
Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~ times the
screen height
.
Keep a space of 10 cm or over between the TV set and wall for good ventilation
.
Never put the TV set at location with excessive temperature or moisture, to avoid damage or failure of
its components
.
Automatic demagnetizing
A colour TV set is likely to be affected by magnetic field, to cause stain on screen or colour
distortion. If the TV set is moved while on, turned or affected by a magnetic object nearby, turn off the
power supply and wait for at least 1 hour to turn it on again, to ensure that the automatic demagnetizing
circuit will work normally again, to eliminate the effect of magnet on colour and resume the vivid
pictures.
To ensure best reception, use outdoor antenna or cable antenna (CATV). The type and location of
antennas shall vary with places.
Notes: Connect the outdoor antenna as shown above, and also install a lightning arrester and perform
periodical checking and repair.
It is suggested that a 5Ω coaxial cable be used, to eliminate interference or noise due to
improper matching of impedance.
The cable must not be tied together with supply cord.
(300Ω-75Ω)
(75Ω)
(300Ω)
Installation
Antenna connection method
４
Installin the batteries
Precautions in operatin the remote controller
● Aim the remote control at the infrared receiving window on the TV set.
● Do not press the keys on the remote control quickly and continuously.
● If the remote control will not be used for long time or if the batteries are flat, please take the batteries
out to prevent leaking.
● Never throw the battery into fire, and properly dispose of the used batteries.
● Take care not to drop, wet or dismantle the remote control.
1
Remove the sliding cover
from the remote control.
2
Load two Size AAA batteries into the
chamber, with the +/- poles of batters in line
with the +/- marks.
Installation
Remote Control Preparation
５
654 3 21
V-MENU P-TV/AV
7
P+ V+
The control buttons are in the front of the TV (below the picture tube), behind the cover.
1. Main power switch
2. Remote control sensor
3. Power indicator
4. Program number up (+) and down (-)
5. Volume up (+) and down (-)
6. Menu button
. TV/AV button
8. AV socket
9. Antenna input and AV IN/OUT terminals
Control Location
Television
Front Panel & Input/ Output Terminals
６
Buttons on remote controller:
1. AV status switch button
2. TV switchover
3. Sound system button
4. Game button
5. AVL button
6. Clock button
. Volume UP/DOWN button
8. Prog.swap button
9. Tuning button
10. Feature button
11. Direct Program number buttons
13. Standby button
14. Screen display button
15. Colour system button
16. I/II button (The button is non-functional.)
1 . Effect button (The button is non-functional.)
18. Timing button
19. Program number Up/Down button
20. Menu button
21. Picture button
22. Sound button
23. Program back view button
Names and Functions of Controls
Remote control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
７
12. Mute button
24. Picture Mode button
1. Press the power switch, the power indicator will be on, and after several seconds, the tv
set will begin normal operation.
2. Press the
button on the remote controller, the television will be in standby mode and
The power indicator will be on but the screen off. In this mode, press the
button on
the remote control or the direct program number buttons (0-9). (You can also turn it on
by pressing the “P+” button)
Note: To ensure normal operation at all times, never turn the television on and off
frequently. Wait for at least 5 seconds before turnin it on a ain.
3. Selecting the “
” button on the remote control will place the Internet section of the
Television in standby mode; press the “
” button again to turn it on again.
4. If you want to completely turn off the power supply, please press the main power switch
on the TV set.
Note: Do not leave the television in standby mode for a lon time. Please turn off the
power switch if the TV set will not be used for lon time.
Operatin Instructions
Turn the power supply ON/OFF
８
1 Selecting a desired program
Use the direct Pro ram number Selection buttons
Press the number buttons 0-9 on the remote control to select the single digit program
number (0-9).
Press the “-/--” button on the remote control to display to select double-digit programs.
You can press number buttons 0-9 to select Program number (10-99), by first selecting the
tenth digit then the unit digit; after pressing the “-/--” button to display “---”, you can press
number buttons 0-9 to select Program number 100-22 Program number, by first selecting
the hundredth digit, then the tenth digit and then the unit digit.
Use the Pro ram number Up/Down Button “P+” “P-” buttons
Pressing “P+” will select a Program number in by increasing numbers.
Pressing “P-” will select a Program number in by decreasing numbers.
2 Adjust the volume by Volume “V+/V-” button.
3 If the colour or sound of a channel is not normal, it may be an incorrect setting of colour
or sound system, and it can be adjusted as described below:
press the MENU button 3 times consecutively, so that the screen will display the
following menu (or select the FEATURE button)
● If the picture colour is not normal
Press P+/P- to select “COLOUR” (it turns from white to green), then press “V+/V-” to
select the correct colour system.
AUTO→PAL →NTSC 4.43→NTSC 3.58 will appear in turn.
●
●●
●
If the sound is not normal
Press the SOUND SYSTEM button repeatedly on the remote controller to select the
correct sound system. Alternatively highlight the SOUND option under the FEATURE
menu using P+ or P-. Then use V+ or V- to change to BG system within the following
selection sequence:
BG
→
I
Australia isPAL BG
Note: If you are using the television for the first time, please first use the auto search and
store the programs as described in “Adjustment” on page 9.
Program Selection
TV Operation
FEATURE
COLOUR
COLOUR COLOUR
COLOUR
AUTO
AUTO AUTO
AUTO
SOUND DK
BLUE SCREEN ON
９
1 Pro ram preset (auto search)
When you turn on the TV set for the first time, you must select the “MENU” button
continuously on the TV or the remote control, so that the following menu is displayed
on the screen:
Use “P+/P-” button to select “AUTO STORE” option (it turns from white to green),
then press “V+” button to begin the auto search. The following menu is displayed on the
screen. During auto search, you can press any button to stop the search.
During auto search, the selected programs will be automatically memorized, and be
stored from the current Program number If the number of searched programs has exceeded
the maximum Program number to be stored, the auto searching will stop automatically; If
the number of searched programs does not exceed the maximum Program number to be
stored, at the end of auto search, all the Program numbers not stored with program will be
set as “SKIP ON”.
At the end of auto search, the Program number will jump automatically to the first
Program number
2 Pro ram preset (Manual Tunin )
If the auto search function cannot find the desired channel, or you want to preset the
desired channels to a designated Channel number one by one, please use the manual tuning
search function.
TV Operation
Start operation: Adjustment
1 11111
AUTO STORE
VHF-L
AUTO
TUNING
PROG. 1
AUTO STORE
AUTO STOREAUTO STORE
AUTO STORE
SEARCH
FREQ.FINE
BAND VHF-L
SKIP OFF
Inhaltsverzeichnis
Andere Telefunken Fernseher Handbücher
Telefunken
Telefunken TE32550B42V2D Bedienungsanleitung
Telefunken
Telefunken Telefunken DF321E Bedienungsanleitung
Telefunken
Telefunken T7068TL Bedienungsanleitung
Telefunken
Telefunken TE32553B45V2DZ Bedienungsanleitung
Telefunken
Telefunken TF-LED32S22T2 Bedienungsanleitung
Telefunken
Telefunken TE32550B42V2H Bedienungsanleitung
Telefunken
Telefunken TE24555S27YXD Bedienungsanleitung
Telefunken
Telefunken TKP2147STX Bedienungsanleitung
Telefunken
Telefunken TE39PNDB40Q2D Bedienungsanleitung
Telefunken
Telefunken TFK 22 DSCT 20 WB Bedienungsanleitung
Telefunken
Telefunken TE24550B42V2E Bedienungsanleitung
Telefunken
Telefunken S590NIC Bedienungsanleitung
Telefunken
Telefunken TF42K192A Bedienungsanleitung
Telefunken
Telefunken TE32551B40Q2D Bedienungsanleitung
Telefunken
Telefunken T22R900 Bedienungsanleitung
Telefunken
Telefunken WS2868N Bedienungsanleitung
Telefunken
Telefunken DF 316 ET Bedienungsanleitung
Telefunken
Telefunken T32TX275DLBPOS Bedienungsanleitung
Telefunken
Telefunken L22F137D2 Bedienungsanleitung
Telefunken
Telefunken TKP2177ST Bedienungsanleitung
Beliebte Fernseher Handbücher anderer Marken
Philips
Philips Colour Television Bedienungsanleitung
Toshiba
Toshiba 27A10 Bedienungsanleitung
Philips
Philips 42PF9630A/37 Bedienungsanleitung
Hitachi
Hitachi 32FX48B Bedienungsanleitung
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung
Changhong Electric
Changhong Electric uhd55b6000is Bedienungsanleitung
