Teleste MCC101 Bedienungsanleitung

User manual

MCC101 H.

264 Encoder/decoder

This manual provides information

installation

setup and

operation

of the MCC101

as well as

troubleshooting tips.

MCC101 User manual, 59300506, rev001

MCC101 User manual

1. Introduction •I

Safety Precautions

Make sure the power is turned off before installing MCC101.

Make sure to use the product within the temperature range stated in the specification.

A recommended installation location is an indoor environment with dry and dust-free

conditions.

Ensure that the cooling air flow around the product is not prohibited.

Do not operate the product in presence of heavy electrical machinery or strong magnetic

fields.

Do not open the cover of the product in any circumstances.

Make sure that voltage is correct voltage before connecting the power on.

II •1. Introduction

MCC101 User manual

Table of Content

1. Introduction

...........................................................................................................................1

About this manual ...............................................................................................................1

Features............................................................................................................................. 1

Product and Accessories......................................................................................................2

System Connections ............................................................................................................5

2. Installation

............................................................................................................................8

3. System Operation

................................................................................................................. 11

Remote Video Monitoring ................................................................................................... 11

Initialization of IP address................................................................................................... 15

4. Remote Configuration

........................................................................................................... 16

System Configuration......................................................................................................... 17

Video Configuration ........................................................................................................... 21

Audio Configuration ........................................................................................................... 27

Network Configuration........................................................................................................ 29

Serial Configuration ........................................................................................................... 36

Event Configuration ........................................................................................................... 39

Preset Configuration .......................................................................................................... 44

Record Configuration ......................................................................................................... 45

User Configuration ............................................................................................................ 52

5. Decoder Configuration

.......................................................................................................... 54

System Configuration......................................................................................................... 54

Video Configuration ........................................................................................................... 55

Network Configuration........................................................................................................ 56

Event Configuration ........................................................................................................... 58

Display Configuration......................................................................................................... 59

6. Appendix

............................................................................................................................ 60

MCC101 User manual

1. Introduction •1

1. Introduction

About this manual

This User Manual provides information on installation setup and operation of the MCC101, as well as

troubleshooting tips.

Features

MCC101 is a video and audio transmission system that provides broadcast quality audio and video, based on

IP networking. MCC101 can be operated either as an Encoder or as an Decoder, the desired mode is user-

selectable.

Video

Highly efficient compression algorithm, H.264 & MJPEG support

Wide range of transmission rates: 32kbps ~ 10mbps (primary stream)

Various bit rate modes: CBR, VBR

Built-in motion detection

Audio

Multi-Transmission Mode : Unidirectional Mode (IP-server to Client PC or Decoder / Client PC or

Decoder to IP-server), Bi-directional Mode

Network

Fixed IP & Dynamic IP (DHCP) support

1:1, 1:N support

Multicasting

Automatic transmit rate control according to network conditions

OnVIF, PSIA compliant

Serial Data

RS-232 support

RS-422 (4-w) or RS-485 (2-w) support

Data pass-through mode : Serial data communication between Encoder - Decoder

2•1. Introduction

MCC101 User manual

Sensor and Alarm

Support direct connections of external sensor and alarm devices

Event Alarm

USB

Connection to internal or external USB storage for remote access, recording and playback

User Interface

System configuration using Internet Explorer

High Reliability

Reliable embedded system

System recovery by dual watch-dog functions

Product and Accessories

MCC101 User Manual Power adapter and Cable

MCC101 User manual

1. Introduction •3

Part Names and Functions

Front View

Position Description Function

1 Reset button Initialization of network setting

2 LEDs Display power On/Off condition, Link, Status and data

3 Audio In, Out Audio Input and Output, for 3,5 mm stereo jack

4 USB USB port for external recording purposes

5 LAN (Ethernet) 100/10Base-T Ethernet interface, RJ-45

234

4•1. Introduction

MCC101 User manual

Rear View

Position Terminal Function

1 POWER IN DC 12V power input

2 SENSOR Sensor input, screw terminal block

3 ALARM Relay output, screw terminal block

4 RS-422/485 (COM2)

Serial port 2 (COM2) for PTZ control and etc. Support

RS-422 and RS-485 protocol, screw terminal block

5 RS-232 (Com1)

Serial Port 1 (COM1) for PTZ control and etc. Support

RS-232 protocol, screw terminal block

6 VIDEO OUT Video output, BNC

7VIDEO IN Video input, BNC

2 3 4 5 6

MCC101 User manual

1. Introduction •5

System Connections

MCC101 operates as one of the two modes; as Encoder or Decoder. MCC101 units can be connected in

either 1-to-1 fashion where one encoder is connected one decoder or 1-to-many fashion where one encoder is

connected to many decoders.

Following chart shows data status of video, audio and serial data on each mode.

System Mode Video Audio Serial Data

Encoder Transmit Transmit/Receive Transmit/Receive

Decoder Receive Transmit/Receive Transmit/Receive

Therefore, the system modes are defined by the video communication and all system modes are capable of

bi-directional transmission of audio or serial data.

Topology

Typically, the encoder and a decoder are connected in 1-to-1 mode. To support specific situation,

1-to-multiple connection is also supported.

1:1 Connection (Unidirectional Transmission).

The most commonly used configuration is 1 to 1 connection. An encoder is installed at a site where video

images can be transmitted and a decoder is installed at a center location to receive and view the video images

on monitors. Audio and serial data are transferred in either direction.

Encoder Decoder

Site

Remote Center

6•1. Introduction

MCC101 User manual

1:N Connection (Unidirectional Transmission).

In this configuration, a site can be monitored by many remote center locations. Number of maximum

connections are limited by the network bandwidth.

Functionally, a VMS (Video Management System) software can replace the HW decoder.

Multicast Mode

In a network supporting multicast mode, the products can be configured to Multicast mode which enables to

use the network bandwidth efficiently regardless of the number of decoders. In 1:N connection, a large

number of decoders can receive audio and video data from an encoder by using a single streaming

transmission.

Relaying

In this arrangement, video and audio can be retransmitted from a center to another center. The arrangement

is useful when the network bandwidth at the site is limited while there is more than one center wanting to

monitor the site.

IP-

server

Site

Remote Center #1

Decoder

Remote Center #2

Decoder

Encoder Decoder

Decoder

Remote Center

Site

Inhaltsverzeichnis

Andere Teleste Medienkonverter Handbücher

Teleste

Teleste EASI INE101 Bedienungsanleitung

Teleste

Teleste MCC201 Bedienungsanleitung

Teleste

Teleste EASI ATM IND2x2 Series Bedienungsanleitung

Teleste

Teleste EASI Bedienungsanleitung

Teleste

Teleste EASI IP Series Bedienungsanleitung

Teleste

Teleste MPH241 Bedienungsanleitung

Teleste

Teleste MCC201 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung