Teletek electronics BRAVO KBD Bedienungsanleitung

BRAVO KBD

Wireless Control Keyboard

Installation and Operation User Manual

Attention! This manual contains information on limitations regarding

product use and function and information on the limitations as to liability of the

manufacturer. The entire manual should be carefully read!

General Description

BRAVO KBD is a wireless control LED keyboard for operation with BRAVO

panels. The keyboard is equipped with a wide-angle detection dual sensor for

automatic activation of the buttons backlight in case of movement in front of it.

The built-in light sensor detects the amount of ambient light in the room and

controls the keyboard backlight activation for improving the battery life and

conserve more energy.

Functional Features

• Arming (Full or Stay Arming Mode) and Disarming of the system

• LED indication for system status – armed, disarmed, technical trouble,

memory events

• Supports operation with up to 6 User codes and 1 Manager

• Built-in sensors for buttons backlight activation and ambient light

• Wall mounting bracket

Package contents

In the packing box of BRAVO KBD are included the following additional parts:

• 2 pcs anchors (ø6x30) and 2 pcs screws (3.5x30) suitable for mounting on

brick wall. Note: In case the device needs to be mounted on other type of

surface, it is required to use supporting elements that hold 900N downwards

force.

•2 pcs battery, type CR123A, placed into keyboard battery holder

• 1 pc mounting bracket (on the back of keyboard)

Technical Characteristics

Certied RED directive

Battery (type CR123A)* 2 х 3 V/ 1500mAh

Battery life ~1.5 years

Operation frequency ~868 MHz

Communication type Two-way

Radio distance (open space) Up to 400m

Indication type LED

Working temperature -20°C - +55°C

Mounting height 1.5 - 3.6 m (2.1 m)

Dimensions 102 x 84 x 25 mm

Weight (including batteries) ~140g

BRAVO KBD Elements

Front view Side view Rear view

1 - Operation buttons:

0-9 - Digit buttons for entering of user codes, address numbers, values

#- Enter into keyboard programming menus; conrmation of entered

codes or values

X- Cancel the operation; step back in programming menus; exit from

programming menus

2 - System status buttons and indication - see on the next page

3- Built-in sensors for buttons backlight activation and ambient light

4 - Tamper switch

5- ENROLL Button

6 - RESET Button

7- Mounting bracket

8- Battery compartment

Installation Instruction

IMPORTANT NOTES: The BRAVO KBD wireless keyboard should be

installed in a minimum distance of at least 2 meters far from other sources

of radio signals (power lines, Wi-Fi or Bluetooth routers, wireless telephone

stations, etc.)

The minimum distance between the BRAVO panel and enrolled BRAVO KBD

keyboard must be 1 meter to guarantee the proper operation of the system.

You should consider also that the presence of electromagnetic

disturbances may trigger the near eld sensor of BRAVO KBD and to

turn on the background lights of the device!

SAFETY PRECAUTIONS: Keep new and used batteries away from children!

If the battery compartment does not close securely, stop using the product and

keep it away from children’s reach. If swallowed, the coin-sized and other type

batteries can cause serious injuries and burns in just 2 hours. In case of any

doubt for swallowing of a battery, seek for medical help immediately!

Mounting Bracket

1- Slide down the mounting bracket to unlock the side pins.

2 - Pull up the bracket outside the rear back cover.

3 - Use the screws from the kit to mount the bracket on the place of

installation.

4 - When the enrollment of the keyboard is nished, place it to the bracket as

rst match the side pins into the holes and then pull down to lock.

Batteries Compartment

(CR123A)

+-+-

(CR123A)

1 - Use a at screw-driveр to press slightly the clip of the batteries

compartment.

2 - Pull up the screw-driver to open.

3 - Press the cover of the compartment downwards.

4 - Pull up the protective folio of the batteries to power up the keyboard and to

start enrollment to the system conguration.

5 - Close the batteries compartment.

Enrollment to the BRAVO System Conguration

The BRAVO panel supports operation with only one BRAVO KBD!

• Prepare the BRAVO KBD keyboard for enrollment to the system – remove

the cover of the batteries compartment and pull out the protection folio. Close

the cover. The system status indicators are blinking one-by-one in series – the

keyboard is ready to be enrolled.

• Enter in “Device enrollment” mode of the panel.

• The system enters in the menu for detectors enrollment. Press the

“Programming” button of the panel to move to the menu for key fobs

enrollment – this is the menu for enrolling the keyboard. The LED indicator

under the key-fob icon is lighting on and the position 1 is blinking. The

numbers of the free positions (with no key fobs enrolled) are lighting in green,

and those with already enrolled key fobs – in red. The currently selected

position number is blinking.

• Use the buttons with arrows to select a number of a free position – the

number is blinking in green.

• Press a random digit button or the ENROLL button on the rear cover of the

keyboard. The icon for arming starts blinking in red.

• The panel conrms the successful enrollment with a sound signal, and the

selected position number is blinking in red. The keyboard will also conrm

the enrollment with three short beeps and blinking of the icon for disarming in

green.

• After exit from “Device enrollment” mode, the keyboard is ready to use.

Resetting of BRAVO KBD

The resetting of a device is restoring of its default factory settings.

To reset the BRAVO KBD: With batteries on, press the “RESET” button on

rear cover for 3-5 seconds until you see 3 green blinks from the icon for

disarming. The system status indicators are blinking one-by-one in series –

the keyboard in not enrolled to the system.

Sound Signalization of BRAVO KBD

Sound Description

Button Single short beep indicating the pressing of a key.

Conrmation Three sound signals, indicating the system conrmation for

executed operation; entry/exit the programming menus.

Cancellation A single long beep, incorrect operation or rejection.

Entry time Continuous beep, indicating intrusion into an entrance zone

when the system is armed.

Exit time

Short beeps, indicating the system is armed and the user is

required to leave the entrance zone. Ten seconds before the

exit time is over beep frequency increases.

Technical

trouble

Two short beeps at every 20 sec, indicating a technical

trouble. To stop the signalization - press the ATTENTION

button on the BRAVO panel. You can disable the Trouble

Signalization of the keyboard at address 20.

* ATTENTION:

Use only Panasonic

batteries approved

by the manufacturer,

type CR123A 3V/

1500mAh! Use only

IEC 60086-4 tested

batteries!

EN50131-1

EN50131-3 Grade 2 Class II

Memory

event

“Alarm” melody in case of memory event presence, after

disarming the system.

Chime

Short beeps with subsequently increasing period, indicating

intrusion into an entry-exit type zone with an activated chime

option, when the system is disarmed.

Arming Two short sound signals indicating system ARMING followed

by the signalization for exit time.

Disarming Three short sound signals indicating system DISARMING.

Access Codes for Programming and Management

Type Code Functions

Engineer 7777

(default)

- Direct entry into “Device enrollment” mode.

- Changing own code.

- Keyboard settings.

Manager 0000

(default)

- Arming/Disarming the system.

- Setting, changing and deleting user access codes.

- Changing own code.

- Keyboard settings.

- Clearing the memory event indication.

User

(1-6)

-- Arming/Disarming the system.

- Changing own code.

- Keyboard settings.

- Clearing the memory event indication.

LED Indication for System Status

Icon Description Color State Description

Arming

button Red

Lights on System is Armed

Blinking - Enrolling to panel

- Entry in programming mode

Disarming

button Green

Lights on System is Disarmed

Blinking

- Conrmation for enrollment

- Entry at address in

programming mode

Warning

indicator

for troubles

and memory

events*

Yellow Lights on System is disarmed, trouble

event presence

Blinking Selected device (from the panel)

Red

Lights on System is armed/disarmed,

memory event presence

Blinking Disabled value in programming

mode; set user code at address

*Note: In case of presence of a technical trouble and a memory event at the

same time, the indication for memory event is with higher priority.

User Operation

Arming with a code

The user can perform Full or Stay Arming of BRAVO panel.

To perform Full arm, enter in sequence:

Manager or User code - - 1 - Exit time starts running

To perform Stay arm, enter in sequence:

Manager or User code - - 2 - Exit time starts running

Quick Arming without a code

The quick arming without a code is available when the option “Keyboard quick

Arm Buttons” is Enabled (via ProsTE software) for the BRAVO panel to which

the BRAVO KBD is enrolled.

To perform Quick Full arm, enter in sequence:

- 1 - Exit time starts running

To perform Stay arm, enter in sequence:

- 2 - Exit time starts running

Disarming

The disarming is performed with entering of valid Manager or User code.

Blocking the keyboard

In case of entering of three wrong (not valid) user codes in sequence,

conrmed with #, the keyboard will be blocked for operation for 90 seconds.

Sending of a panic alarm

In case of emergency situation, the User can activate a panic alarm, pressing

and holding for 3-5 sec the buttons combination (the panics type - silent or

audible - are set via ProsTE software):

1+3 – Police panic alarm (silent by default)

4+6 – Medical panic alarm (silent by default)

7+9 – Fire alarm panic alarm (audible)

The keyboard will conrm with three short sound signals.

Clear the indication for event memory

The presence of a memory for an alarm event is indicated with lighting on

red icon . The indication will stay active until the next arming, but can be

cleared manually after entry in memory events review menu on the BRAVO

panel and introducing a manager or user code:

Button on BRAVO panel - Manager or User code -

User Programming

Attention: The programming is accessible when the system is disarmed!

Address Description Default Rights

00 Changing own code. -

Engineer,

Manager,

Users

01 Set, change, delete User code 1. -

Manager

02 Set, change, delete User code 2. -

03 Set, change, delete User code 3. -

04 Set, change, delete User code 4. -

05 Set, change, delete User code 5. -

06 Set, change, delete User code 6. -

20 Enable/Disable Trouble Sounds

signalization of the keyboard. Enabled

Engineer,

Manager,

Users

21 Keyboard buzzer sound volume (1-9).

Set “0” to disable the sound volume. 5

22 Keyboard backlight intensity (1-9).

Set “0” to disable the backlight activation. 5

How to change own code

This setting is accessible for all type access codes: Engineer, Manager, User.

To change your own code, enter in sequence:

Code - # - 00 - + + are blinking – enter new code – #

For exit press “X” button.

How to set a new User code

This setting is accessible with Manager access code only. The presence of a

set code for a User is indicated with a blinking icon – see “How to change

a user code”.

To set a new code for User 1 (in the example), enter in sequence:

Manager code - # - 01 - + are blinking - enter code – #

For exit press “X” button.

How to change a user code

This setting is accessible with Manager access code only.

To change the code for User 1 (in the example), enter in sequence:

Manager code - # - 01 - + + are blinking – enter new code – #

For exit press “X” button.

How to delete a user code

This setting is accessible with Manager access code only.

To delete the code for User 1 (in the example), enter in sequence:

Manager code - # - 01 - + + are blinking – press and hold “0”

button to delete the code - 3 short beeps will conrm the operation

At next entry at address 01, only icons + are blinking, which means no

code combination for User 1 is set. For exit press “X” button.

How to disable Trouble Sounds signalization of BRAVO KBD

This setting is accessible for all type access codes: Engineer, Manager, User.

The Trouble sounds signalization from BRAVO KBD keyboard is Enabled by

default. The option is disabled when is indicated with a blinking icon at

address 20. To disable the Trouble sound signalization, enter in sequence:

Code - # - 20 - + are blinking - press any key -

+ + are blinking - #

For exit press “X” button.

How to change the buzzer sound level of BRAVO KBD

This setting is accessible for all type access codes: Engineer, Manager, User.

The buzzer sound level can be set in range from 1 (lowest) to 9 (the highest).

The buzzer sound can be entirely muted with setting 0 (no sound).

To change the buzzer sound level, enter in sequence:

Code - # - 21 - + are blinking – set sound level 1-9 - #

For exit press “X” button.

How to change the intensity backlight of buttons of BRAVO KBD

This setting is accessible for all type access codes: Engineer, Manager, User.

The backlight intensity of the digit buttons can be set in range from 1 (lowest)

to 9 (the highest). The backlight can be entirely turned o󰀨 with setting 0.

To change the intensity of the backlight of the buttons, enter in sequence:

Code - # - 22 - + are blinking - set intensity 1-9 - #

For exit press “X” button.

Direct entry into “Device enrollment” mode with BRAVO KBD

For direct entry into the “Device enrollment” mode of BRAVO panel, enter in

sequence:

Engineer code - # - the panel is in “Device enrollment” mode

For exit press “X” button of the keyboard.

Changing Batteries

It is recommended rst to bypass the keyboard from the panel. Then remove

the cover of the battery compartment and change the batteries with new ones.

After that de-bypass the keyboard from the panel. 18021103, RevA, 06/2021

Andere Teletek electronics Tastatur Handbücher

Teletek electronics

Teletek electronics AVA Bedienungsanleitung

Beliebte Tastatur Handbücher anderer Marken

Vortexgear

Vortexgear POK3R Bedienungsanleitung

Razer

Razer RZ03-0188 Bedienungsanleitung

Logitech

Logitech RUGGED LITE Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5839 Montageanleitung

Hama

Hama AK-120 Bedienungsanleitung

Rodgers

Rodgers RK-76 Bedienungsanleitung

Logic Controls

Logic Controls KB5000 Series Bedienungsanleitung

Rapoo

Rapoo E9270P Bedienungsanleitung

iKey

iKey DP-88 Bedienungsanleitung

Logitech

Logitech G413 TKL SE Montageanleitung

Keychron

Keychron C1 Bedienungsanleitung

Dahua

Dahua NKB Bedienungsanleitung

Ultimate Technology

Ultimate Technology 500 POS Bedienungsanleitung

Ducky

Ducky Shine 5 Bedienungsanleitung

Mace

Mace MACALLY MERGOKEY Bedienungsanleitung

iKey

iKey KYB-42-KIOSK Bedienungsanleitung

Akko

Akko MX108 Bedienungsanleitung

Viper

Viper V770 Bedienungsanleitung