Telex RadioCom IC-100 Bedienungsanleitung
RadioComTM
General Description
The IC-100 allows the assignment of any two of six
input lines to any one of twelve two channel outputs.
In addition, the six input lines are available as a loop
through output. All input are protected against
transients and power crosses.
IC-100 Product Features
•Input and output connections are compatible with
BTR-1 Wireless Intercom.
•Non-shorting rotary switches allow reconfiguration
without channel cross-connection.
•An active power monitor indicates the presence of
power on all input lines with minimal loading.
•D sub to XLR breakout on rear panel.
Inputs
There are two ways to connect input lines to the
IC-100:
1. Feed the lines into the 15 pin D sub connector on
the rear panel marked I/C IN. The pin assignments
are shown in Table 1.
2. Connect a patch cable between I/C IN and
EXTERNAL LINES OUTPUT on the rear panel
and feed the lines into the six XLR connectors
marked EXTERNAL LINES INPUT.
Table 1 - Inputs
IC-100
CAT. NO. 301971000
INTERCOM SOURCE ASSIGN PANEL PN 804203
INSTRUCTION SHEET
XLR Equivalent D Conn Pin Number
LINE 1 PIN 2 1
LINE 1 PIN 3 9
LINE 2 PIN 2 2
LINE 2 PIN 3 10
LINE 3 PIN 2 3
LINE 3 PIN 3 11
LINE 4 PIN 2 4
LINE 4 PIN 3 12
LINE 5 PIN 2 5
LINE 5 PIN 3 13
LINE 6 PIN 2 6
LINE 6 PIN 3 14
GND 7
GND 8
GND 15
Telex Communications, Inc.
Specifications
Bridging Impedance...................44k Each Channel
Supply Current........................20ma Each Channel
Peak Pulse Capability..................................1500W
Fuse Rating....................................1.5A Fast Blow
Overvoltage Protection < 1.5A Indefinite Duration
Size (Approximate).................H: 7.00" (177.8mm)
W: 19.00" (482.6mm)
D: 5.00" (127mm)
Weight (Approximate)..................10 lbs. (4.54 kg)
Patents........................................................Pending
Assigned Outputs
Assigned outputs are available in two places.
1. The twelve six pin XLR connectors on the front
panel.
2. The two 25 pin D sub connectors on the rear panel.
The pin assignments are shown in Table 2.
Table 2 - Assigned Outputs
Loop Through Outputs
Loopthroughconnectionsmaybemadeinoneofthree
ways.
1. Connect to the three pin XLR connectors on the
frontpanel.Eachlinehastwoconnectorsavailable.
2. Connect to the 15 pin D sub connector on the rear
panel marked I/C OUT. The pin assignments are
the same as for the I/C IN connector.
3. Connect a patch cable between I/C OUT and
POWER SUPPLY OUTPUT and connect to the six
three pin XLR connectors marked POWER
SUPPLY INPUTS.
Front View - IC-100
Rear View - IC-100
Assigned
Output XLR Equivalent D Conn Pin Number
1 or 7
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
16
4
17
5
2 or 8
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
20
8
21
9
3 or 9
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
24
12
25
13
4 or 10
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
3
15
2
14
5 or 11
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
7
19
6
18
6 or 12
CHANNEL 1 PIN 2
CHANNEL 1 PIN 3
CHANNEL 2 PIN 2
CHANNEL 2 PIN 3
11
23
10
22
Telex Communications, Inc.
8601 East Cornhusker Highway, Lincoln, NE 68507
CH 1 1
2
3
4
5
6
CH 2
1
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
2
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
3
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
4
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
5
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
6
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
7
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
8
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
9
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
10
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
11
1
2
3
4
5
6
CH 1 1
2
3
4
5
6
CH 2
12
1
2
3
4
5
6
LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6
Telexâ
RadioCom
IC-100
ä
RadioCom
IC-100
P/N: 879944
SN: XXXX
Telex Communication, Inc.
8601East Cornhusker Highway, Lincoln, NE 68507
Madein U.S.A. 804070
LINE 1
P2 P3
LINE 2
P2 P3
LINE 3
P2 P3
LINE 4
P2 P3
LINE 5
P2 P3
LINE 6
P2 P3
EXTERNAL LINES
OUTPUT
I/C IN
POWER SUPPLY
OUTPUT
I/C OUT
7 THRU 12
1 THRU 6
ASSIGNED
OUTPUTS
POWER SUPPLY INPUTS
EXTERNAL LINES INPUTS
LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6 LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6
FOR CONTINUED EQUIPMENT PROTECTION REPLACE
ONLY WITH 1.5A 250V FAST ACTING FUSES
Andere Telex Gegensprechanlage Handbücher
Telex
Telex RADIOCOM BTR-1 Bedienungsanleitung
Telex
Telex Audiocom EMS-4001 Bedienungsanleitung
Telex
Telex PROCOM2 Bedienungsanleitung
Telex
Telex RadioCom BTR-500/600C Bedienungsanleitung
Telex
Telex Radiocom BTR-200 Series Bedienungsanleitung
Telex
Telex RKP-4 Technisches Handbuch
Telex
Telex Audiocom BP-2002 Bedienungsanleitung
Telex
Telex RadioCom TR-300 Bedienungsanleitung
Telex
Telex SS2000 Bedienungsanleitung
Telex
Telex Audiocom IC-4M Bedienungsanleitung
Telex
Telex BP-2000 Bedienungsanleitung
Telex
Telex RadioCom BTR-800 Bedienungsanleitung
Telex
Telex Audiocom ES4000A Bedienungsanleitung
Telex
Telex Audiocom SPS-2000 Bedienungsanleitung
Telex
Telex Audiocom IC-6SX Bedienungsanleitung
Telex
Telex IC-1 Bedienungsanleitung
Telex
Telex 4010 Bedienungsanleitung
Telex
Telex WTR-670 Bedienungsanleitung
Telex
Telex Audiocom WM1000 Montage- und Bedienungsanleitung
Telex
Telex Audiocom IFB-1000 Bedienungsanleitung
