Telindus 1120 Bedienungsanleitung
USER’S GUIDE
Telindus Technical Publications - Geldenaaksebaan 335 - B-3001 Leuven Belgium - Tel. +32 16 382011
1120/1121 ADSL Router
Version: 6.0
USER’S GUIDE
II User’s Guide
Copyright Notice
Copyright Notice
The information and descriptions contained in this publication are the property of
Telindus. Such information and descriptions must not be copied or reproduced by any
means, or disseminated or distributed without the express prior written permission of
Telindus.
This publication could include technical inaccuracies or typographical errors, for which
Telindus never can or shall be held liable. Changes are made periodically to the
information herein; these changes will be incorporated in new editions of this
publication. Telindus may make improvements and/or changes in the product(s)
described in the publication at any time, without prior notice.
This equipment, for safety and hygiene purposes, complies with the specific
provisions contained in ARAB/RGPT 54 quater 3.1 (RD 20 06 1975, Art 1, Section X,
Accident Prevention Policy).
Version 6.0 March, 2002
©TELiNDUS
User’s Guide III
TableofContents
TableofContentsTableofContents
TableofContents
1. Before You Begin
1.1 Introduction.............................................................................. 5
1.2 Package Includes..................................................................... 5
1.3 Minimum System Requirements ..............................................6
2. HardwareInstallation
2.1 Diagram of the Telindus 1120/1121.......................................... 7
2.2 Hardware Installation .............................................................10
2.3 Setup Instructions ..................................................................10
2.4 Connect to the Ethernet .........................................................11
2.5 Connect to the DSL Interface .................................................12
2.6 Connect to Power ..................................................................13
3. Software Installation
3.1 TCP/IP Installation .................................................................15
4. Configuration
4.1 Configuration Using Web GUI ................................................25
4.2 Basic Configuration - SETUP .................................................26
4.3 Basic Configuration - PVCs ...................................................29
4.4 Basic Configuration - LAN ......................................................32
4.5 Basic Configuration - STATUS ...............................................34
4.6 Basic Configuration - DIAGNOSTIC ......................................35
4.7 Advanced Configuration - PORT MAPPING ..........................36
4.8 Advanced Configuration - IP ROUTING ................................38
4.9 Advanced Configuration - IP FILTERING ..............................40
4.10 Advanced Configuration - BRIDGE FILTERING ....................43
4.11 Advanced Configuration - UPGRADE ....................................45
IV User’s Guide
Table of Contents
5. Troubleshooting
5.1 No SYNC/WAN Link LED Flashing ........................................47
5.2 Cannot Detect the ADSL Router ............................................48
5.3 DSL Service Seems Slow ......................................................48
Appendix A - Glossary
Glossary ...............................................................................................
Appendix B - Reference
FCC Statement ................................................................................53
FCC Part 68 Requirements ..............................................................54
User’s Guide 5
Before You Begin 1
11
1
This Chapter Includes:
1.1 Introduction........................................................5
1.2 Package Includes................................................5
1.3 Minimum System Requirements .......................6
1.1 Introduction
The Telindus 1120/1121 ADSL Router is the ultimate solution for any
office or home searching for ultra-fast access to the Internet and
remote networks over ADSL. ADSL Router is a stand-alone device
with true plug-and-play capability. It works with any computer using
an Ethernet port.
The purpose of this guide is to help you ease through the installation
process by providing simple step-by-step instructions in setting up
your ADSL Router. Please read this guide carefully before you start
installing the unit.
1.2 Package Includes
• Telindus 1120/1121 ADSL Router (x 1)
• AC to AC Power adapter (x 1)
• CD-ROM (x 1) includes:
User’s Guide in PDF format
• RJ-11 to RJ-11 ADSL phone cable (x 1)
• RJ-45 to RJ-45 straight-through Ethernet cable (x 1)
Before You Begin
6 User’s Guide
1.3 Minimum System Requirements
• ADSL line
• Microsoft Windows 98 or later version
• 166 MHz Pentium or equivalent processor
• 16 MB RAM or more
• 170 MB available free hard disk space before installation
• 28.8k or faster modem (optional for dial-up access)
• Available 10BaseT Ethernet or USB port on the main computer
• CD-ROM Drive
User’s Guide 7
Hardware
Installation 2
22
2
This Chapter Includes:
2.1 Diagram of the Telindus 1120/1121...................7
2.2 Hardware Installation.......................................10
2.2 Hardware Installation.......................................10
2.3 Setup Instructions ............................................10
2.4 Connect to the Ethernet....................................11
2.5 Connect to the DSL Interface ..........................12
2.6 Connect to Power.............................................13
2.6 Connect to Power.............................................13
2.1 Diagram of the Telindus 1120/1121
Front Panel Interfaces
Figure 2.1 Telindus 1120 ADSL Router
Figure 2.2 Telindus 1121 ADSL Router
PWR -- Power
A green PWR LED is ON when power is supplied to the NDS.
DIAG -- Diagnostic
The yellow DIAG LED indicates that the ADSL Router is in a self-
diagnostic mode during boot-up. Once the ADSL Router boots up
successfully, the DIAG LED stops flashing and remains off. If there is
a software malfunction or a problem with the ADSL Router, the DIAG
LED will remain on.
LAN LINK -- Local Area Network (Ethernet)
The green LAN LINK LED displays the 10BaseT Ethernet connection
between ADSL Router and your Ethernet network. The green LED is
on and remains solid if there is a valid link.
LAN ACT (Activity) -- Local Area Network (Ethernet)
A flashing yellow LED indicates Ethernet dataactivity between the PC
Hardware Installation
8 User’s Guide
and the ADSL Router. The LED flashes when there is data activity on
this port.
Hardware Installation
User’s Guide 9
WAN LINK -- Wide Area Network Link
The green WAN LINK LED displays the 10BaseT Ethernet connection
between the ADSL Router and the remote DSL network. The WAN
LED is on and remains solid if there is a valid link.
WAN ACT (Activity) -- Wide Area Network Activity
A flashing yellow WAN ACT LED indicates data activity between the
remote DSL network and the ADSL Router unit. The LED flashes
when there is data activity on this port.
Back Panel Interface
Figure 2.3 Back Panel Interface
DSL
The ADSL interface connects the ADSL Router to an ADSL line.
POWER
The power interface connects to the power adapter.
ETHERNET
The Ethernet interface connects the ADSL Router to a 10BaseT
network.
Hardware Installation
10 User’s Guide
2.2 Hardware Installation
CAUTION!!! Turn off all electronic devices, including your personal
computer, before you begin to connect and disconnect cables.
Personal Safety
• In case of emergency, locate the closest electricity power-off
switch.
• Refrain from touching any active wires or terminals.
• Remove jewelry before working on equipment connected to
electricity.
• Keep cables away from walkways.
• Dispose this product in accordance with national laws and
regulations.
Product Handling
• Keep ventilation slots clear.
• Operate in a clean and dust-free location.
• Cables must be attached to the correct interfaces; to do
otherwise may result in damaging the ADSL Router or produce
hazardous voltage.
• Do not operate or store the product in an environment that
surpasses temperature or humidity specifications.
2.3 Setup Instructions
• Choose a location for the Router close to a power outlet and a
nearby telephone outlet. In addition, select a convenient
location that does not experience too much foot traffic and is
away from sunlight.
• The optimum spot to place the Router is on a level surface –
such as a desktop, shelf, or table.
• Place the Router on the predetermined surface, so you can see
the back panel for accessible cable connection.
Andere Handbücher für 1120
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Telindus Netzwerk-Router Handbücher
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise