Telinga PRO-X V.2 Benutzerhandbuch

www.telinga.com

V.1.0 INT.

PRO-X V.2 System Manual

1.1 Introduction

Thank you for purchasing a Telinga parabolic reflector. Please before

you use this Telinga read the complete manual.

Telinga Microphones, Sweden, started manufacturing parabolic microphones in

1981. The initial goal was to complete the first portable parabolic reflector

system capable of recording in mono and stereo - without using multiple

cables or preamplifiers.

All our parabolic microphones are designed to be reliable, light-weight and

very easy to use. Great care has been taken to solve the most common

problems with parabolic dishes - wind and handling noise, as well as inherent

noise from the microphone. Telinga designs are developed in co-operation with

film makers, ornithologists and researchers in the field of bio-acoustics.

ASSEMBLING

Parabolic

Dish 22”

Black ring without

thread.

Microphone

Telinga MIC.

Tripod Mount

insert holder.

Fastening

bolt.

Gray

Gray ring with

thread securing dish.

Tube holding

dish and mic.

TELINGA 3,5 mm Mini-Jack connector (PRO-X) TO RECORDERS / MIC INPUT

L/R. Please enable your recorders PLUG -IN POWER (PIP)

CAUTION!

PLEASE DO NOT CONNECT A TELINGA PRO-X SYSTEM DIRECTLY

TO A RECORDER OR PREAMP WITHOUT USING THE HANDLES 3,5

MM MINIJACK ONLY. PLEASE DO NOT CONNECT THE TELINGA

PRO-X USING XLR ADAPTERS WITHOUT OUR RECOMMENDATION.

A INCORRECT XLR ADAPTER SUPPLYING +48V MIGHT DAMAGE

YOUR TELINGA PRO-X!

PLEASE ENABLE YOUR RECORDERS PLUG IN POWER ALSO KNOWN AS

”PIP”.

ASSEMBLING / INSTALLING (AS PICTURE ABOVE)

1. Connect the Stereo MK3 and the mounting kit (gray tube with black and

gray rings) to the handle, make sure the black and gray rings are positioned

so that the back black ring without thread is supporting behind the dish, and

the gray ring with thread is securing inside the dish. As assembling picture

above.

IMPORTANT: Make sure you fasten and secure the rings and tube properly

(tight enough) inside the dish and handle, to avoid handling noise! Use the

large handle knob to fasten the Stereo MK3 inside the gray tube. The dish

should not be able to move between the gray rings or handling noise will

occur. Use a Telinga/or Rycote dish HWC (high wind cover) when recording in

windy conditions, or side winds may cause turbulence inside the dish.

2. Connect the 3,5 minijack connector (PRO-X) going from the

bottom of the handle to the recorder or preamp microphone

inputs. REMEMBER: The cable will always be the weakest link,

treat it with love and care!

3. Connect your quality (!) headphones to your recorder. For

reference we use Beyer DT-990 headphones. Make sure the input and

outputs are not set to high: acoustical feedback may occur! Enable

the "REC" position or "MONITOR" with the Plug In Power (PIP)

ENABLED: ON

PLEASE DO NOT USE THE DISH INSIDE AS REFLECTIONS MAY CAUSE

ACOUSTICAL FEEDBACK.

FINISHED

RECOMMENDED STEREO MK3 FOCUS POSITIONS.

Setting up the correct focus is very easy!

To set the correct focus of your TELINGA STEREO MK3 please mount it in the

the dish with the front of the black foam aligned with the opening of the dish.

The transparent 6” round plate separating left and right channels should be

positioned vertically, not horizontal.

That is the correct position.

The Stereo MK3 should NOT be mounted so that it points outside of the dish.

Recommended

Place a constant sound source outside, such as a small FM-radio, a portable

speaker system or such at medium distance 30 meters / 100 feets or so, away

from the parabola - now use your Telinga as a "radar", move it side to side

and learn how it performs by using your ears!

TELINGA STEREO MK3

The Stereo MK3 microphone has an Equivalent Noise Level of aprx. 12

dB(A)only. Thereby, it does great justice to the dynamic range of

modern recorders.

The focused sound of the dish will be picked up in mono, while the

background will be presented in stereo. Handling and wind noise

suppression is excellent.

The over-all sound characteristics is a "soft" high and a "big" and

very transparent mid and low.

The stereo sound resembles the stereo of a "dummy head". There is no "hole"

between left and right. When using the parabola, a sound can move from one

side to the other without "ping-pong" effects.

FOCUS

Smaller than actual size.

Microphone movable for

optimal performance.

STEREO MK3: The plate separates the two sides from each other, while the

focused sound will affect the two microphones equally Result: the focused

sound will be recorded mono, while the background will be presented in

stereo, to L&R channels. NOT M/S! (3 channels)

THE FOLDABLE 22” TELINGA DISH

The V2 Telinga foldable dish is 22" (57 cm) and weighs only 0.33 kg /

0.72 lbs. The improved polycarbonate mix offers greater performance and

plastic memory. Compatible with ALL Telinga handles and microphones -

including earlier models such as the PRO-5/6/7/8 handles and microphones.

Folding the dish is very easy, and you may fold it over and over again for

travelling. Simply use your hands until it is folded together properly (as the

above photo) - this so you can place it inside the Soft Case or a Suitcase. The

V2 dish comes with 2 years international warranty, so you don´t have to be

afraid of accidently breaking it.

PACKING THE COMPLETE SYSTEM

PLEASE NOTE: YOU CAN ONLY FOLD THE V2 FOLDABLE 22” DISH

(STANDARD WITH PRO-9 MK2 AND PRO-X)

Pack your complete Telinga setup with the handle, microphone and

cables protected inside the rolled dish - with some padding in between: a

High Wind Cover for example. After travelling the dish will retain it´s shape

quickly. If you go for longer travels, 8-12 hours (+) where your Telinga is

stored inside an airplane as carry on luggage (for example) let the dish rest for

some time, unfolded, to retain it´s shape before recording.

Please DO NOT store your Telinga permanently with the dish folded

for longer periods of time, when not used. The dish might deform.

Complete weight including cables is only 1.2 kilo / 2.6 lbs (or less depending

on model)

ATTACHING A (OPTIONAL) TELINGA OR RYCOTE DISH HIGH WIND COVER (HWC)

Turbulence inside a parabolic dish, caused by side winds, can only effectively

be reduced by covering the entire opening of a dish. The windshield will also

serve as extra protection against rain and prevent insects from buzzing

around inside the dish while recording. When storing your complete setup

inside the Telinga Soft Case you may also use it as a good "wrap around"

cloth, protecting your microphone further. The Rycote HWC offers up to 35

dB in wind noise reduction.

Inhaltsverzeichnis

Andere Telinga Mikrofon Handbücher

Telinga

Telinga UNIVERSAL MK2 Bedienungsanleitung

Telinga

Telinga TELINGA MODULAR Bedienungsanleitung

Telinga

Telinga PRO-8 MK2 Benutzerhandbuch

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung