Telstra 4G MY POCKET WI-FI PLUS Montageanleitung

GETTING TO

KNOW YOUR

TELSTRA PREPAID

4G MY POCKET

WIFI PLUS

LET’S GET THIS SHOW

ON THE ROAD

Your Telstra Pre-Paid 4G My Pocket Wi-Fi

Plus has been tested to the highest

standards to offer you the best possible

coverage and speed experience on the

network without equal.

This guide will help you get connected

as quickly and as easily as possible.

It’ll guide you through installation and

run through all the handy extra features

that are included.

If all goes to plan you’ll be up and running

in no time, so you can get connected

while you’re on the move.

WHAT’S

INSIDE

03 Safety first

05 Let’s get started

09 Getting connected

13 Monitoring your data usage

15 Wi-Fi home page

19 Extra features

22 Problem solving

26 Extra bits you should know

LET’S GET THIS SHOW

ON THE ROAD

SAFETY

FIRST

Please read all the safety notices before using this

device. This device is designed to be used at least

20cm from your body. Do not use the device near

fuel or chemicals or in any prescribed area such as

service stations, refineries, hospitals or aircraft.

Obey all warning signs where posted.

Radio frequency safety information

The device has an internal antenna. For optimum

performance with minimum power consumption

do not shield the device or cover it with any object.

Covering the antenna affects signal quality, may

cause the router to operate at a higher power level

than needed, and may shorten battery life.

Radio frequency energy

Your wireless device is a low-power radio

transmitter and receiver. When switched on it

intermittently transmits radio frequency (RF) energy

(radio waves). The transmit power level is optimised

for best performance and is automatically reduced

when there is good quality reception. Maximum

power is used only at the edge of network coverage

so under most circumstances the power output is

very low. Under poor network conditions the device

SAFETY

FIRST

transmits at a higher power, may get hot and may

have a significantly shorter battery life.

Declaration of conformity –

specific absorption rate (SAR)

Your device is designed to be used at least 20cm

from the body. We declare that the product

detailed in this manual, and in combination with

our accessories, conforms with the essential

requirements of the Radio Communications

Standard (Electromagnetic IC Radiation Human

Exposure) 2003 and the Australian Communications

and Media Authority Section 376 of the

Telecommunications Act 1997 when used at a

distance of not less than 20cm from the body.

The worst case SAR test result for 10g tissue size

measured at 10mm distance is 1.458W/kg.

ROHS declaration

(reduction of hazardous substances)

The manufacturer declares that your device is free

from hazardous materials and complies with EU

directive 2002/95/EC (commonly known as RoHS)

and the amendments.

N14945

Your package contains the following:

•TelstraPre-Paid4GMyPocketWi-FiPlus

device with built in battery

•TelstraPre-PaidSIMcard(insertedindevice)

•TelstraPre-PaidWelcomeGuide

•ThisGettingStartedGuide

•MicroUSBcable

•ACadapter

•Manufacturer’swarrantycard

LET’S GET

STARTED

YOUR TELSTRA

PRE-PAID 4G MY

POCKET WIFI PLUS

External Antenna Ports

SIM Card Slot Wi-Fi Protected

Setup

Power

The display shows you the status of your

Telstra 4G Pre-Paid My Pocket Wi-Fi Plus.

Number of

users

connected

Signal

strength

Messages

Batterylevel

Data usage

meter

Wi-Fi Name

Wi-Fi

Password

Wi-Fi Name (SSID) and Wi-Fi Password

(Security Key)

You can change the Wi-Fi Name and

Wi-Fi Password to your own preferences

via the Wi-Fi home page. See page 15.

Quick reference section

Default Wi-Fi Name

(SSID)

Displayed on the front

screen of your device

when powered on.

Default Wi-Fi

Password

(Security Key)

Case sensitive and is

displayed on the front

screen of your device

when powered on.

Wi-Fi home page http://m.home

Wi-Fi home page

password

Restore defaults Press and hold the Reset

button located next to SIM

card slot for 5 seconds.

1. Insert SIM card

•YourSIMcardshouldalreadybeinsidethedevice.

Check to make sure. Open the SIM card slot cover

by lifting the flap and insert SIM as shown below.

2. Switch on your Telstra Pre-Paid 4G

My Pocket Wi-Fi Plus

•PressandholdthePowerkeyuntil

the screen lights up.

GETTING

CONNECTED

Inhaltsverzeichnis

Andere Telstra Drahtloser Zugangspunkt Handbücher

Telstra

Telstra WI-FI 4GX ADVANCED III Handbuch

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung