Teltonika RUT900 Bedienungsanleitung

https://wiki.teltonika-networks.com/view/RUT900_Device_Recovery_Options

RUT900 Device Recovery Options

Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 Device Recovery Options

Contents

1 Summary

2 Default login information

2.1 Devices with random password

3 Factory reset

3.1 Reset Button

3.2 WebUI

3.3 Command line

4 Bootloader menu

5 RMA

Summary

This chapter is an overview on various recovery options for a RUT900 device.

Default login information

Using recovery methods resets the device's configuration to its default state. Therefore, you will

need to use the default authentication info in order to login to the device. The default login

information for RUT900 is provided below:

Default Address (LAN IP): 192.168.1.1

Default Username: admin

Default Password: admin01 or random generated password*

Devices with random password

* Certain devices or batches of a device may have a generated password out of the box, instead of

admin01. For RUT900 devices, batch from when unique passwords are used is

You can find the batch of your device on the Product Labels sticker.

Factory reset

A factory reset returns the device back to its default factory settings, i.e., it deletes all custom

configurations. Below you will find various methods of performing a factory reset on RUT900.

Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a

factory reset.

Reset Button

The reset button is located on the {{{panel}}} of the device:

The reset button has two functions:

Reboot the device. If the reset button is pressed for up to 4 seconds, the device will reboot.

Start of the reboot will be indicated by the flashing of all 5 signal strength LEDs together with

the green connection status LED.

Factory reset. If the reset button is pressed for at least 5 seconds (by default), the device will

perform a factory reset and reboot.

NOTE: the default button hold time value (5 seconds) can be changed in the router's WebUI,

from the System → Administration → General page.

WebUI

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to

the Backup section found under the System tab (System → Backup → Restore default settings).

In the very bottom of the page there's a Restore button that performs a factory reset on click:

Command line

You can perform a factory reset via command line by executing the firstboot command. After this

you will be asked to confirm the reset. If you're sure, type the letter y and press "Enter" or type the

letter n if you wish to cancel the reset.

If you agreed to perform a factory reset, next type in reboot and press "Enter". The router will be

reset to it's factory settings and rebooted. The entire sequence of events should look like this:

root@Teltonika-RUT900:~# firstboot

This will erase all settings and remove any installed packages. Are you sure?

[N/y]

/dev/mtdblock5 is mounted as /overlay, only erasing files

root@Teltonika-RUT900:~# reboot

You can find more information on the command line interface (CLI) here.

Bootloader menu

The bootloader menu is a special router state used as a recovery tool in case the router becomes

inaccessible even after a factory reset. It can be used to upgrade the router's firmware or bootloader

version.

In order to place the router into the bootloader menu state, follow these steps:

Unplug all cables from the router.

Plug in one Ethernet cable for your computer into any LAN port.

Press and hold the reset button.

While holding the reset button, plug the power cable into the router. Continue holding the

button for another 4 seconds.

Release the reset button.

If you followed all the steps correctly, all panel LEDs should light up. This means that the device is in

the bootloader menu state. If that is not the case, repeat the steps again.

Regardless of what the router's IP address was before, the IP address of the router when it's in the

bootloader menu state is always 192.168.1.1. So in order to reach the router, you'll have to set up a

static IP address that's in the 192.168.1.0/24 network (for instance, 192.168.1.2) on your computer.

Instructions are provided in the links below:

Windows

Linux

When set your computer's IP, you should be able to reach the router's HTTP server. The address

depends on what you wish to upgrade:

Bootloader upgrade URL: 192.168.1.1/uboot.html

Firmware upgrade URL: 192.168.1.1/index.html

Type in the relevant address into the URL field of your web browser, upload the image file and click

the Update button. Firmware/bootloader image files can be downloaded from here.

If everything was done correctly, the update should begin. At this point you can close the browser

window. The update will take about 120 seconds.

Additional note: don't forget to restore your computer's IP address settings.

RMA

If conventional recovery methods do not help, you may need to send the device to warranty for

repair. The warranty process is described here.

Andere Handbücher für RUT900

Inhaltsverzeichnis

Andere Teltonika Netzwerk-Router Handbücher

Teltonika

Teltonika RUT230 Bedienungsanleitung

Teltonika

Teltonika QSG RUT241 Bedienungsanleitung

Teltonika

Teltonika RUT360 Bedienungsanleitung

Teltonika

Teltonika RUT9 Series Bedienungsanleitung

Teltonika

Teltonika QSG RUT950 Bedienungsanleitung

Teltonika

Teltonika FM36M1 Bedienungsanleitung

Teltonika

Teltonika RUT850 Bedienungsanleitung

Teltonika

Teltonika RUT850 Bedienungsanleitung

Teltonika

Teltonika RUT950 LTE Bedienungsanleitung

Teltonika

Teltonika RUT240 Bedienungsanleitung

Teltonika

Teltonika TFT100 Bedienungsanleitung

Teltonika

Teltonika RUT9 Series Bedienungsanleitung

Teltonika

Teltonika RUT955 Bedienungsanleitung

Teltonika

Teltonika FMx 640 Bedienungsanleitung

Teltonika

Teltonika RUT956 Bedienungsanleitung

Teltonika

Teltonika WiMAX Bedienungsanleitung

Teltonika

Teltonika TMT250 Bedienungsanleitung

Teltonika

Teltonika RUT905 Bedienungsanleitung

Teltonika

Teltonika QSG RUT240 Bedienungsanleitung

Teltonika

Teltonika RUT950 LTE Bedienungsanleitung

Teltonika

Teltonika TRB145 Bedienungsanleitung

Teltonika

Teltonika RUT905 Bedienungsanleitung

Teltonika

Teltonika RUT955 Bedienungsanleitung

Teltonika

Teltonika RUT550 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise