TemperZone TZT-100 Bedienungsanleitung

User Manual

TZT-100 Multi-function

Thermostat

Please take time to read and understand these instructions. Doing so will assist you to

benefit from the many features offered in this premium product.

If properly installed, your thermostat will provide years of trouble- free control of the air temperature

within your living or working environment.

The TZT-100 thermostat has been designed and built by Smart Temp Australia P/L, to be an attractive,

highly reliable and an easy to use thermostat. The TZT-100 model is a modified version of a standard

Smart Temp product. It has been configured specifically to Oasis Heat Pumps requirements for use on

Oasis Heat and Chill Heat Pumps

Care has been taken in the preparation of this manual. However, Oasis takes no responsibility for errors or omissions in this

document. It is the responsibility of the user to ensure this thermostat and the equipment connected to it, is operating to their

specifications, and in a safe manner.

Due to ongoing product improvement Smart Temp Pty. Ltd., Oasis. reserve the right to change the specifications of this

thermostat (or its components) without notice. . Any such changes may impact upon the operational detail described in this

manual. The user should ensure they are reading documentation which relates to the version of thermostat they have.

Introduction

Commercial Programmable mode

On / Off and Mode Selection

Setting the Clock

Programming Your 2 Daily Events9

After Hours Rn Timer

Manual model

On / Off and Mode Selection

Setting the Fan Function

Setting the Clock

Setting Your Desired Temperature

Switching Between Day and Night Set Points

To Review the Set Temperature

Common Functions

The Buttons Explained –ON/Off and Mode Selection etc

Control Modes

Fan Functions

Table of Contents

This TZT-100 thermostat is able to be used as a residential programmable thermostat, a

commercial programmable thermostat or as a simple to use manual thermostat. Your

installer will have set these modes to best suit your individual needs.

For clarity, this user manual is broken into the following main sections.

Commercial Programmable Mode.

Allows programming of 1 “Start” and 1 “Stop” time and temperature per day.

Manual Mode. (See page 18 of this manual).

Use the MODE button to switch On and Off. No time-related programming available.

Common Functions - All modes.

On /Off and Mode Selection

Tap the “MODE” button to cycle the thermostat through

the available modes: “Heat” only, “Cool” only, Auto-

changeover (Shown by both “Heat” & “Cool” in the LCD),

Emergency Heat (if fitted), and “OFF”. If the fan mode is

set to “Fan On”, when you select “OFF” mode the fan

mode will automatically change to “Auto Fan” to prevent

the fan from running unexpectedly while the unit is OFF.

(Note –Not all modes may be active on yourthermostat).

Setting the Clock

The thermostat is fitted with a real time clock. This clock is used by the thermostat for

the programming functions as described below.

It is essential that the clock time and day are set accurately if you require your

programmed events to start on time.

Commercial Programmable Mode

Toset the clock, tap the

“PROG”

button. The LCD will show the hours digit flashing. Use

the

( )

down

( )

button

adjust

the

hours

the

correct

time

(notethe AM

/PM symbol). Tapthe

“PROG”

button againand now the minutes digits

will

flash.

Adjust

this

value

using

the

( )

down

( )

button

show

the correct minute. Tap

the

“PROG”

button again and now the weekday flashes, again

use

the

( )

down

() button

set

this

value

the

correct

day

the week. Tap the

“PROG”

button

again toexittheclocksetfunction.

Programming Your 2 Daily Events

Commercial programming of the thermostat has been designed to be an extremely

simple and logical process. The thermostat permits you to program a START time for the

air conditioning system, then a Stop time for each day of the week. When the thermostat

is displaying “START” in the LCD, it will maintain whatever set point has been chosen.

When the thermostat is displaying “STOP”

in the LCD it will be OFF (or it will maintain an energy

efficient overnight temperature if set by the installer).

To enter the program mode:

Press and hold the

“PROG”

button for 3 seconds. The

display will change to show the Day “Monday” flashing.

Using

the

( )

down

( )

buttons

adjust

the day

to the day you wish to start programming an event orto

the day you wish toeditan existing event.

Tap the

“PROG”

button to advance to the next step, The

LCD will show the word “START” with the hour’s digit

flashes.

Using

the

( )

down

( )

buttons

adjust

the hours value to the time you wish the building Air

Conditioning system to start.

Tap the

“PROG”

button again, now the minute’s digits

flashes.

Using

the

( )

down

( )

buttons

set the

minute to the time you wish the building air conditioning

systemto“START” forthecurrentlyselected day.

Tap the

“PROG”

button to advance to the next step, The LCD will show the word

“STOP”

with

the

hour’s

digit

flashes.

Using

the

( )

down

( )

buttons

adjust the

hours to the time you wish the building air conditioning

system to “STOP” for the currently selected day.

Tap the

“PROG”

button again, now the minute’s digits

flashes.

Using

the

( )

down

( )

buttons

set the

minute to the time you wish the building air

conditioning system to “STOP” for the currently

selected day. The LCD will now show the

word “COPY”.

You now have TWO options

Option 1 - Continue programming as above.

Simply continue to tap the “PROG” Button as you have been previously to advance to the

next day, “Tuesday” in this example “START” then “STOP” times, then Wednesday,

Thursday etc, following the same simple steps previously explained….

Option 2 –“Copy” Program

To copy the values you have just set to other days of the

week

tap

the

( )

down

( )

buttons

“TAG”

each

additional

day

you

wish

copy

the

currently

set days

program to. When you have finished “Tagging” the days

you desire press the

“PROG”

button to initiate the copy

process. The word “Copy” will flash briefly to confirm the

copy process and your current days values will be copied

to the days selected. Normal programming will resume at

the next day to be programmed.

Please Note –Your thermostat’s programs may be controlled from a Building

Management System (BMS) thereby overriding any program you may have entered, as

described above. If the BMS is controlling the thermostat the word “Start” or

“Stop” will flash in the LCD to indicate the thermostat program is under BMS control.

After Hours Run Timer

For convenience, the installer may have set the after-hours run function. This function

permits you to temporarily turn the thermostat back on for an installer pre-set period

of time if the “Stop” program is running, at the conclusion of which the thermostat will

automatically turn back off again.

To activate the after-hours run timer, simply tap the

“O/RIDE” button. (Or, the optional “After Hours” run

button on the remote room temperature sensor.) The LCD

will show the word “Override” flashing in the LCD.

You can cancel any unexpired portion of the timer period

by tapping the “O/RIDE” button again. The word

“Override” will vanish from the screen.

To Review the Set Temperature:

Simply

tap

the

( )

down

( )

button

first

turn

the

LCD

backlight

then

again to

display the currently set temperature.

Your Installer may have set a default “Start” event temperature that will be used at the

commencement of each day; this will override any previous day’s temperature

adjustments.

ON / OFF and Mode Selection

Tap the “MODE” button to cycle through all the available

modes: “Heat”-only, “Cool”-only, Auto-changeover (Both

“Heat” & “Cool” show in the LCD at the same time),

Emergency Heat (if fitted), and “OFF”. If the fan mode is

set to “Fan On”, when you select “OFF” mode, the fan

mode will automatically change to “Auto Fan” to prevent

the fan from running unexpectedly while the unit is OFF.

(Note –Not all modes may be active on your thermostat).

Setting the Fan Function

Detail of the thermostat’s fan control functions can be found on page 26 of this manual.

Setting the Clock

The thermostat has a real time clock. In Manual mode, this clock has no function other

than to display the time. The clock display can be disabled by the installer if desired.

To set the clock, press and hold the

“PROG”

button for 3 seconds. The LCD will show

the

hours

digit(s)

flashing.

Use

the

( )

down

( )

button

adjust

the

hours to

the correct time (note the AM / PM symbol). Tap the

“PROG”

button and

now

the

minutes

digits

will

flash.

Adjust

this

value

using

the

( )

down

( )

button

show the

correct

minute.

Manual Mode

Andere Handbücher für TZT-100

Inhaltsverzeichnis

Andere TemperZone Thermostat Handbücher

TemperZone

TemperZone TTS-10 Betriebsanleitung

TemperZone

TemperZone Climate Touch Bedienungsanleitung

TemperZone

TemperZone SAT-3 Betriebsanleitung

TemperZone

TemperZone TZT-100 Benutzerhandbuch

TemperZone

TemperZone SAT-2 Betriebsanleitung

TemperZone

TemperZone EASY ZONE TOUCH Bedienungsanleitung

TemperZone

TemperZone TZT-701 Benutzerhandbuch

TemperZone

TemperZone TTS-11 Betriebsanleitung

TemperZone

TemperZone TTS-10 Bedienungsanleitung

TemperZone

TemperZone SAT-1 Betriebsanleitung

TemperZone

TemperZone CLIMATE TOUCH CTC-1 Leitfaden

TemperZone

TemperZone TZT-701 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung