Tenda W303R Bedienungsanleitung
Wireless N300 Home Router
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names mentioned
herein are the trademarks or registered trademarks of their respective
holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Shenzhen Tenda Technology Co.,
Ltd. Without prior expressed written permission from Shenzhen Tenda
Technology Co., Ltd, any individual or party is not allowed to copy,
plagiarize, reproduce, or translate it into other languages.
All photos and product specifications mentioned in this manual are
for references only. Upgrades of software and hardware may occur;
Tenda reserves the right to revise this publication and to make changes in
the content hereof without obligation to notify any person or organization
of such revisions or changes. If you would like to know more about our
product information, please visit our website at
http://www.tendacn.com.
Wireless N300 Home Router
Table of Contents
TABLE OF CONTENTS…………………………………………........................3
CHAPTER 1 PRODUCT OVERVIEW……………………………………………………1
1.1 PACKAGE CONTENTS………………………………………………………………………………………………1
1.2 GETTING TO KNOW YOUR ROUTER……………………………………………………………………………1
CHAPTER 2 INSTALLATION AND QUICK SETUP GUIDE…………………………6
2.1 PREPARATION………………………………………………………………………………………………………6
2.2 PHYSICAL INSTALLATION…………………………………………………………………………………………6
2.3 INTERNET CONNECTION SETUP……………………………………………………………………………….8
2.3.1 Use Standard TCP/IP Properties for DHCP……………………………………………………8
2.3.2 Log in to Web Manager………………………………………………………………………………….8
2.3.3 Quick Internet Connection Setup………………………………………………………………….9
2.3.4 Verify Internet Connection
Settings………………………………………………………………10
2.3.5 Wireless Settings…………………………………………………………………………………………12
2.3.6 Connect to Device Wirelessly……………………………………………………………………13
CHAPTER 3 ADVANCED SETTINGS…………………………………………………20
3.1 STATUS……………………………………………………………………………………………………………20
3.2 INTERNET CONNECTION SETUP……………………………………………………………………………21
3.2.1 PPPoE……………………………………………………………………………………………………………21
3.2.2 Static IP………………………………………………………………………………………………………22
3.2.3 DHCP……………………………………………………………………………………………………………23
3.2.4 PPTP……………………………………………………………………………………………………………24
3.2.5 L2TP……………………………………………………………………………………………………………25
3.3 MAC CLONE……………………………………………………………………………………………………….26
3.4 WAN SPEED………………………………………………………………………………………………………27
3.5 WAN MEDIUM TYPE……………………………………………………………………………………………27
3.6 LAN SETTINGS……………………………………………………………………………………………………30
3.7 DNS SETTINGS…………………………………………………………………………………………………30
3.8 DHCP……………………………………………………………………………………………………………….31
3.9 DHCP CLIENT LIST……………………………………………………………………………………………32
CHAPTER 4 WIRELESS SETTINGS……………………………………………………34
4.1WIRELESS BASIC SETTINGS………………………………………………………………………………….34
4.1.1 Wireless AP Mode…………………………………………………………………………………………34
4.1.2 WDS Bridge Mode………………………………………………………………………………………36
4.2 WIRELESS SECURITY……………………………………………………………………………………………44
4.3 WIRELESS ACCESS CONTROL………………………………………………………………………………47
4.4 WIRELESS CLIENT………………………………………………………………………………………………48
CHAPTER 5 BANDWIDTH CONTROL…………………………………………………50
5.1 BANDWIDTH CONTROL…………………………………………………………………………………………50
5.2 TRAFFIC STATISTICS……………………………………………………………………………………………51
CHAPTER 6 SPECIAL APPLICATIONS………………………………………………53
6.1 PORT RANGE FORWARDING…………………………………………………………………………………53
Wireless N300 Home Router
6.2 DMZ HOST………………………………………………………………………………………………………54
6.3 DDNS………………………………………………………………………………………………………………55
6.4 UPNP………………………………………………………………………………………………………………56
6.5 STATIC ROUTING…………………………………………………………………………………………………57
6.6 ROUTING TABLE…………………………………………………………………………………………………58
CHAPTER 7 SECURITY…………………………………………………………………59
7.1 URL FILTER………………………………………………………………………………………………………59
7.2 MAC FILTER………………………………………………………………………………………………………60
7.3 CLIENT FILTER……………………………………………………………………………………………………62
CHAPTER 8 TOOLS………………………………………………………………………64
8.1 REBOOT……………………………………………………………………………………………………………64
8.2. RESTORE TO FACTORY DEFAULT SETTINGS……………………………………………………………64
8.3 BACK/RESTORE…………………………………………………………………………………………………64
8.4 SYSLOG……………………………………………………………………………………………………………66
8.5 REMOTE WEB-BASED MANAGEMENT………………………………………………………………………66
8.6 TIME…………………………………………………………………………………………………………………67
8.7 LOGIN PASSWORD………………………………………………………………………………………………68
8.8 FIRMWARE UPGRADE……………………………………………………………………………………………68
APPENDIX 1 HOW TO CONFIGURE IP………………………………………………70
WIN7 OS CONFIGURATION……………………………………………………………………………………70
XP OS CONFIGURATION…………………………………………………………………………………………73
APPENDIX 2GLOSSARY…………………………………………………………………77
APPENDIX 3 FAQS………………………………………………………………………80
APPENDIX 4 REMOVE WIRELESS NETWORK FROM YOUR PC……………82
APPENDIX 5 SAFETY AND EMISSION STATEMENT……………………………85
Wireless N300 Home Router
1
Chapter 1 Product Overview
1.1 Package Contents
Unpack the box and verify the package contains the following items:
Wireless Broadband Router
Power Adapter
Installation Guide
Resource CD(including User Guide, Quick Install Guide, and setup
wizard)
Ethernet Cable
If any of the above items is incorrect, missing, or damaged, please contact
your Tenda reseller for immediate replacement.
1.2 Getting to know your router
Before you cable your router, take a moment to become familiar with the
front and back panels and the label. Pay particular attention to the LEDs on
the front panel.
Front Panel
Wireless N300 Home Router
2
Front LED Overview
LED Status Description
Wireless N300 Home Router
3
Solid Indicates a proper connection to the power
supply
Power
Off Indicates an improper connection to the power
adapter
SYS Blinking Indicates system is functioning properly
Solid WPS is enabled
Blinking
Device is performing WPS authentication on a
client device
WPS
Off WPS is disabled or WPS negotiation is finished
Solid Wireless is enabled
Blinking
Transferring data
WIFI
Off Wireless is disabled
Solid LAN port connected correctly
Blinking
LAN port is transferring data
LAN（1/2/3）
Off LAN port connected incorrectly
Solid WAN port connected correctly
Blinking
WAN port is transferring data
WAN
Off WAN port connected incorrectly
Wireless N300 Home Router
4
Back Panel
Back LED Overview
Port Description
WAN Usually for connecting DSL MODEM、CABLE MODEM、ISP to
the Internet.
LAN(1/2/3) Usually for connecting computers, switches .etc.
POWER The power adapter is connected and you can use the provided
adapter to supply power.
WPS/ RESET When you press this button for 7 seconds, files set by the router
will be deleted and restored to default factory settings; for 1 second,
WPS will be enabled and the WPS LED will be blinking accordingly.
1.3 Position your Router
The router lets you access your network from virtually anywhere within the
Wireless N300 Home Router
5
operating range of your wireless network. However, the operating distance
or range of your wireless connection can vary significantly depending on the
physical placement of your router. For example, the thickness and number of
walls the wireless signal passes through can limit the range. For best results,
place your router:
• Near the center of the area where your computers and other devices
operate, and preferably within line of sight to your wireless devices.
• So it is accessible to an AC power outlet and near Ethernet cables for
wired computers.
• In an elevated location such as a high shelf, keeping the number of
walls and ceilings between the router and your other devices to a minimum.
• Away from electrical devices that are potential sources of interference.
Equipment that might cause interference includes ceiling fans, home
security systems, microwaves, PCs, the base of a cordless phone, or a
2.4-GHz cordless phone.
• Away from any large metal surfaces, such as a solid metal door or
aluminum studs. Large expanses of other materials such as glass, insulated
walls, fish tanks, mirrors, brick, and concrete can also affect your wireless
signal.
Wireless N300 Home Router
6
Chapter 2 Installation and Quick Setup Guide
2.1 Preparation
Before connecting Ethernet cables,please verify the following items:
Item Description
Wireless Router Used with the provided power supply
PC Installed with IE8 or other better web browsers.
Ethenet Cable Used for linking the PC to the router
Broadband Service Provided by ISP
Internet Connection
Setup
If you connect to the Internet using a broadband
connection that requires a username and a
password provided by your ISP, please select
PPPoE;
If your ISP provides all the needed information:
IP address, subnet mask, gateway address, and
DNS address(es), please select Static IP;
If you can access Internet as soon as your
computer directly connects to an
Internet-enabled ADSL/Cable modem, please
select DHCP;
If your ISP uses a PPTP connection, please select
PPTP;
If your ISP uses an L2TP connection, please
select L2TP..
2.2 Physical installation
1. Connect one end of the included power adapter to the device and plug the
other end into a wall outlet nearby.(Using a power adapter with a different
voltage rating than the one included with the device will cause damage to
the device.)
Andere Handbücher für W303R
1
Inhaltsverzeichnis
Andere Tenda Netzwerk-Router Handbücher
Tenda
Tenda AC21 Bedienungsanleitung
Tenda
Tenda G1008D Bedienungsanleitung
Tenda
Tenda W311R Bedienungsanleitung
Tenda
Tenda Nova MW6 Bedienungsanleitung
Tenda
Tenda S108 Bedienungsanleitung
Tenda
Tenda TEI402M Bedienungsanleitung
Tenda
Tenda G1005D Bedienungsanleitung
Tenda
Tenda D305 Bedienungsanleitung
Tenda
Tenda TEH160SK Bedienungsanleitung
Tenda
Tenda S105 Bedienungsanleitung
Tenda
Tenda F1200 Bedienungsanleitung
Tenda
Tenda V300 Bedienungsanleitung
Tenda
Tenda F357 Bedienungsanleitung
Tenda
Tenda W150D Bedienungsanleitung
Tenda
Tenda W303R Bedienungsanleitung
Tenda
Tenda PON ONT HG9 Bedienungsanleitung
Tenda
Tenda teg2124t Bedienungsanleitung
Tenda
Tenda TWL542R Bedienungsanleitung
Tenda
Tenda TEI480T Bedienungsanleitung
Tenda
Tenda AC6 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise