Terasic HSMC-NET Bedienungsanleitung

HSMC-NET

Terasic HSMC-NET Daughter Board

User Manual

CONTENTS

Chapter 1 Introduction...............................................................................................................2

1.1 Features..........................................................................................................................................2

1.2 About the KIT.................................................................................................................................3

1.3 Assemble the HSMC-NET Board....................................................................................................4

1.4 Getting Help...................................................................................................................................5

Chapter 2 Architecture ..............................................................................................................6

2.1 Layout and Componets ...................................................................................................................6

2.2 Block Diagram ...............................................................................................................................7

Chapter 3 Board Components....................................................................................................9

3.1 The HSMC-NET Connector............................................................................................................9

3.2 I2C Serial EEPROM.....................................................................................................................15

Chapter 4 Demonstrations....................................................................................................... 16

4.1 Introduction..................................................................................................................................16

4.2 How the Demonstration is built.....................................................................................................17

4.3 System Requirements ...................................................................................................................25

4.4 Setup the Demonstration...............................................................................................................25

4.5 Demo Operation ...........................................................................................................................26

4.6 Overview......................................................................................................................................28

4.7 Nios Program................................................................................................................................29

Chapter 5 Appendix ................................................................................................................ 31

5.1 Revision History...........................................................................................................................31

5.2 Always Visit HSMC-NET Webpage for New Main board..............................................................31

Chapter 1

Introduction

The Terasic HSMC-NET is a Gigabit Ethernet transceiver with a High Speed Mezzanine Connector

(HSMC) interface. It offers network transfers of up to 1 Gbps with the host board using a HSMC

connector. Also, it provides a fully integrated Ethernet solution enabling fast implementation design,

shortening development times, and allows you to focus on the core functions of the system design.

Lastly, the HSMC-NET can be connected any HSMC/HSTC interfaces.

Figure 1-1shows the photo of the HSMC-NET board. The important features are listed below:

One HSMC connector for interface conversion, which is fully compatible with Cyclone III

Starter Kit and DE3 host boards

Duel-Port Integrated 10/100/1000 Gigabit Ethernet transceiver Supports GMII/MII/RGMII/TBI

MAC interfaces for direct connection to a MAC/Switch port

Dynamically configurable to support 10Mbps, 100Mbps (Fast Ethernet) or 1000Mbps (Gigabit

Ethernet) operation

Uses standard Cat 5 UTP (unshielded twisted pair) cabling

Requires a 25-MHz reference clock driven from a dedicated oscillator

Complete Reference Designs

Figure 1-1 The HSMC-NET board

This section describes the package content

HSMC-NET board x 1

System CD-ROM x 1

The CD contains technical documents of the HSMC-NET, and one reference design along with the

source code.

Figure 1-2 HSMC-NET Package

C-

-N

This section describes how to connect the HSMC-NET daughter board to a main board, and using

DE3 as an example shown in Figure 1-4.

The HSMC-NET daughter board connects to the main boards through the HSMC interface. For the

DE3, the HSMC-NET can be connected to any DE3‟s four HSTC connectors using a THCB-HFF

adapter card (Figure 1-3) which can be found in the DE3 package.

Figure 1-3 THCB-HFF adapter card

Figure 1-4 The DE3 board connected to the HSMC-NET daughter board

Note. Do not attempt to connect/remove the HSMC-NET daughter board to/from the main the main board

when the poweris on, or else the hardware could be damaged.

Here are some places to get help if you encounter any problem:

Email to support@terasic.com

Taiwan & China: +886-3-550-8800

Korea : +82-2-512-7661

Japan: +81-428-77-7000

Chapter 2

Architecture

This Chapter covers the architecture of the HSMC-NET board including its PCB and block

diagram.

The picture of the HSMC-NET board is shown in Figure 2-1 and Figure 2-2. It depicts the layout

of the board and indicates the location of the connectors and key components.

Figure 2-1 The HSMC-NET PCB and component diagram

Figure 2-2 The HSMC-NET Back side –HSMC connector view

The following components are provided on the HSMC-NET board :

Ethernet Transceiver (J2/J3)

25MHz Oscillator (Y1/Y2)

HSMC expansion connector (J1)

Marvell 88E1111 Ethernet Device (U2/U3)

Voltage Regulator (REG1/REG2)

I2C EEPORM (U1)

LED/Configuration

Figure 2-3 shows the block diagram of the HSMC-NET board

Figure 2-3 The block diagram of the HSMC-NET board

Chapter 3

Board Components

This section illustrates the detailed information of the components, connector interfaces, and the pin

mapping tables of the HSMC-NET board

C-

-N

This section describes pin definition of the HSMC-NET interface onboard

All the control and data signals of the Ethernet transmitter and receiver are connected to the HSMC

connector, so users can fully control the HSMC daughter board through the HSMC interface. Power

is derived from 3.3V and 12V of the HSMC connector.

Inhaltsverzeichnis

Andere Terasic Transceiver Handbücher

Terasic

Terasic NET-FMC Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung